• 한국실내디자인학회논문집
• /
• 제17권2호
• /
• pp.91-101
• /
• 2008

The purpose of this study is to suggest the design guidelines of exhibition space for conservation of collection in a museum. With the purpose of this study, examined the concept and a condition of conservation which is focused on deterioration in a exhibition space, investigated the actual condition of total 42 facilities and analyzed the specific instance which is excellent by factor of environment plan. Hereupon, the results of this study are as follows. First, exhibition space should be equipped with sufficient 'Filtering Space' before the outdoor and located central territory in a museum facility. Second, exhibition space should be partition off an area into the quality of collection, and then controlled by each of them. Third, in consideration of the annual air fluctuation of our country, the database which is adaptable for setting up the standard of temperature and RH must be prepared. Fourth, it is necessary to establish a 'Reference Exhibition Room' which is formed cellular type and a 'Garnering Exhibition Center'. Fifth, for the prevention of deterioration which is generated in exhibition space, the showcase must be high air-tight. Sixth, it is necessary to reduce a inside space of high air-tight showcase. Seventh, art-sorb is suitable for control the organic matter of collection and a except of fiber optics is not suitable for lighting of showcase. Eighth, wall-type showcase should be have air-chamber which is formed like museum storage and run over 8 hours a day.

• 한국지형학회지
• /
• 제24권4호
• /
• pp.103-115
• /
• 2017

This paper shows the types of deteriorated hiking trails and degrading factors at three Great Walks such as Tongariro Alpine Crossing, Routeburn Track and Kepler Track in New Zealand. The deteriorated trails could be classified into gullying, widening, narrowing, branching and sidewall erosion. Department of Conservation carefully manages overland flows on trails for preventing surface erosion, thus the Great Walks show only a minor problem of gully on trails which is usually active in a mountainous area. Widening and branching of trails caused by tread erosion are not also developed due to the restriction of visitors as well as the management of rainwash. However, despite the detailed maintenance and prevention of an overuse of trails, some trails traversing steep slopes in a alpine zone under a periglacial environment are severely degraded along their sidewalls. It suggests that a unvegetated sidewall of trails has to be strictly managed in an early stage of occurrence and a slope-traversing section should be selected with more consideration when establishing a route of hiking trails.

• Computers and Concrete
• /
• 제15권4호
• /
• pp.643-671
• /
• 2015

Chloride induced reinforcement corrosion is widely accepted to be the most frequent mechanism causing premature degradation of reinforced concrete members, whose economic and social consequences are growing up continuously. Prevention of these phenomena has a great importance in structural design, and modern Codes and Standards impose prescriptions concerning design details and concrete mix proportion for structures exposed to different external aggressive conditions, grouped in environmental classes. This paper focuses on reinforced concrete column section load carrying capacity degradation over time due to chloride induced steel pitting corrosion. The structural element is considered to be exposed to marine environment and the effects of corrosion are described by the time degradation of the axial-bending interaction diagram. Because chlorides ingress and consequent pitting corrosion propagation are both time-dependent mechanisms, the study adopts a time-variant predictive approach to evaluate residual strength of corroded reinforced concrete columns at different lifetimes. Corrosion initiation and propagation process is modelled by taking into account all the parameters, such as external environmental conditions, concrete mix proportion, concrete cover and so on, which influence the time evolution of the corrosion phenomenon and its effects on the residual strength of reinforced concrete columns sections.

• 한국습지학회지
• /
• 제19권1호
• /
• pp.63-68
• /
• 2017

노후화된 하수관거가 증가함에 따라 친환경적이며 효율적인 하수관거의 보수가 필요하다. 본 연구에서는 유리섬유와 뒤틀림 방지 밴드를 이용한 하수관거의 강도 및 뒤틀림을 방지 할 수 있는 하수관거 보수 공법의 성능을 평가하였다. 기존의 하수관거 부분 보수 공법과 비교하여 인장 강도, 압축 강도 및 파괴하중이 증가하였다. 또한 기존에 고려되지 않던 뒤틀림 방지 효과도 확인하였으며, 경제성도 우수한 것으로 나타났다. 향 후 본 연구를 통해 검증한 유리섬유와 뒤틀림 방지 밴드를 이용한 하수관거 보수 공법은 친환경적 및 효과적인 하수관거 보수 공법으로 활용 가능할 것으로 판단된다.

• 교육녹색환경연구
• /
• 제16권2호
• /
• pp.44-53
• /
• 2017

시설물의 유지관리란 시설의 구조적, 기능적, 미적성능을 보전하는 것이다. 이를 통하여 시설물을 이용하는 사람들의 일상적인 편의와 안전을 확보할 수 있도록 하여야 한다. 그러나 준공당시의 시설물은 시간이 지남에 따라 노후화되고 초기의 기능을 확보하는데 어려움을 갖게 된다. 현재 시 도교육청은 학교시설물의 유지관리를 비롯한 점검 및 관리를 형식적으로 수행하고 있어 재난발생위험에 적기대응이 곤란하고, 학교 시설에 대한 안전대책의 수립이 지연되는 등 관리가 부실한 실정이다. 또한 교육환경개선비가 배분기준과 달리 산정되는 등 비합리적으로 결정되고 있다. 이에 본 연구는 수많은 초 중등학교 시설물에 적용할 수 있는 동일하고 단순한 정량적 지표와 방법을 개발하여 객관적으로 학교 시설물의 노후도를 판단할 수 있는 방안을 제안하고 사례 연구를 통하여 검증하였다.

• 한국산학기술학회논문지
• /
• 제20권12호
• /
• pp.715-722
• /
• 2019

콘크리트 구조물은 외부로부터 콘크리트 내부로 침투 및 확산하는 유해 이온(CO₃^2-, Cl^-, SO₄^2- 등)에 의하여 철근의 부식 및 콘크리트 열화가 발생하여 내구성이 저하된다. 따라서 콘크리트의 열화를 방지 또는 지연시키기 위하여 콘크리트 표면 보호용 마감 모르타르의 사용은 매우 중요하다고 할 수 있다. 본 연구에서는 실리카 졸과 칼슘 이온으로 개질한 천연 라텍스 성분을 열화 콘크리트의 보수용 모르타르 또는 콘크리트 표면 보호용 마감 모르타르에 사용할 수 있는 시멘트 모르타르에 사용함으로써 콘크리트의 열화 방지 또는 열화 지연의 가능성에 대해 검토하였다. 연구 결과, 개질 라텍스 성분 중에 함유된 칼슘 이온과 실리카 졸의 성분에 의해 미세한 칼슘 실리케이트 수화물이 시멘트 재료의 공극에 생성되어 시멘트 모르타르의 공극 분포를 감소시켜 유해 이온(CO₃^2-, Cl^-, SO₄^2- 등)의 침투 및 확산을 저감 시키고, 라텍스 성분이 시멘트 경화체의 공극 내부에 존재함으로 내알칼리성 및 중성화 저항성이 향상됨을 확인할 수 있었다.

• 한국수자원학회논문집
• /
• 제56권1호
• /
• pp.45-52
• /
• 2023

2022년 8월 수도권에서 발생한 집중호우 등의 자연재난으로 인해 인명피해와 재산피해가 증가하고 있다. 이에 정부는 자연재난에 대응하기 위해 노력하고 있으나, 관련 기준과 표준화된 품셈의 부재로 방재시설 정비사업의 공사비 증액, 시공품질 저하 등의 문제가 발생하고 있다. 이에 개략공사비 산정 모듈을 개발하여 국내 25개 신규 펌프장에 적용하였다. 분석 결과, 모듈을 통해 도출한 개략공사비의 정확도는 실시설계비의 70%를 기록하여 기존에 사용 중인 환경부의 개략공사비 정확도인 66%보다 4% 더 정확도가 높은 것으로 나타났다. 이에 따라 향후 풍수해재해예방을 위한 개략공사비 산정에 개발된 모듈이 이용될 경우 재해예방사업의 효율성을 높일 수 있을 것으로 기대된다.

• 한국건축시공학회지
• /
• 제2권2호
• /
• pp.121-127
• /
• 2002

The functions and uses of existing buildings are not properly changing as modern life needs. As a result, the frequent reconstruction(construction after removal) of existing buildings have been done but it became more and more difficult because of strengthening of regulations and systems concerning construction. And also it has several disadvantages like lower plot ratio and site coverage than existed buildings, enormous construction cost, production of waste-construction materials and thoughtless consumption of natural resources, which gives rise to environmental pollution. Therefore renovation is brought to the fore. In Korea, many business buildings were constructed in 1960s-1970s, during the period of high growth. Such buildings needs to be repaired in whole. It is caused by the change of social, economic, and cultural conditions and deterioration of equipments. Therefore renovation meets some necessary conditions; recovery of building functions and extension of building life span. In case study, the present state of renovation in business buildings is 1) Basic safety, for example, fire prevention and crime prevention, is great important. 2) Advanced technology, INS(international news service), IBS(Intelligent Building System), and internationalization, is pursued for adapting to multimedia ages. 3) It tries to promote proficiency, and to save the energy using spatial environment and natural energy(light and sound). Also, improving comfortable level of users and installing equipments for physically handicapped person needs to be considered.

• 한국안전학회지
• /
• 제37권6호
• /
• pp.1-8
• /
• 2022

This study analyzed the characteristics of insulation resistance and operating time based on an accelerated degradation test of a low-voltage circuit breaker. The experimental sample used a molded case circuit breaker (MCCB) and an earth leakage circuit breaker (ELCB). After measuring the insulation resistance of the circuit breakers, the leakage current was affected by an external rather than an internal structure. Furthermore, the insulation resistance of the circuit breakers with accelerated degradation was measured using a Megger insulation tester. In the accelerated degradation test, aging times of five, ten, 15, and 20 years were applied according to a temperature derived using the Arrhenius equation. Circuit breakers with an equivalent life of ten, 15, and 20 years had increased insulation resistance compared to those with less degradation time. In particular, the circuit breaker with an equivalent life of ten years had the highest insulation resistance. Component analysis of the circuit breaker manufactured through an accelerated degradation test confirmed that the timing of the increase in insulation resistance and the time of additive loss were the same. Finally, after analyzing the operating time of the circuit breakers with degradation, it was confirmed that the MCCB did not change, but the ELCB breaker failed.

• Steel and Composite Structures
• /
• 제44권4호
• /
• pp.569-586
• /
• 2022

This study introduces a novel friction damper as a component of a recentering frame connection, to solve the problem of structural repair costs, caused by stiffness deterioration and brittle fracture of the central brace frame (CBF). The proposed damper consists of shape memory alloy (SMA) bars with pretension applied to them to improve the stability. SMAs reduce the residual displacement by virtue of the properties of the materials themselves; in addition, a pretension can be applied to partially improve their energy dissipation capacity. The damper also consists of a friction device equipped with friction bolts for increased energy dissipation. Therefore, a study was conducted on the effects of the friction device as well as the pretension forces on the friction damper. For performance verification, 12 cases were studied and analyzed using ABAQUS program. In addition, the friction and pretension forces were used as variables in each case, and the results were compared. As a result, when the pretension and friction force are increased, the energy dissipation capacity gradually increases by up to about 94% and the recentering capacity decreases by up to about 55%. Therefore, it has been shown that SMA bars with adequate pretension in combination with bolts with adequate frictional force effectively reduce residual deformation and increase damper capacity. Thus, this study has successfully proposed a novel friction damper with excellent performance in terms of recentering and energy dissipation capacity.