• Food Science of Animal Resources
• /
• v.42 no.3
• /
• pp.441-454
• /
• 2022

This study aimed to determine the effect of enzyme, guar gum, and pressure processing on the digestibility and physicochemical properties of age-friendly liver sausages. Liver sausages were manufactured by adding proteolytic enzyme (Bromelain) and guar gum, and pressure-cooking (0.06 MPa), with the following treatments: control, without proteolytic enzyme; T1, proteolytic enzyme; T2, proteolytic enzyme and guar gum; T3, pressure-cooking; T4, proteolytic enzyme and pressure-cooking; T5, proteolytic enzyme, guar gum, and pressure-cooking. The pH was high in the enzyme- and pressure-processed groups. The pressure-processed groups had lower apparent viscosity than other cooking groups, and it decreased during enzyme treatment. Hardness was lower in the enzyme- and pressure-processed groups than in the control, and the T4 was the lowest. Digestibility was the highest in T4 at 82.58%, and there was no significant difference with that in T5. The general cooking group with enzyme and guar gum also showed higher digestibility than the control (77.50%). As a result of the sodium dodecyl sulfate-polyacrylamide gel electrophoresis, the enzyme- and pressure-treated groups (T4, T5) were degraded more into low-molecular-weight peptides (≤37 kDa) than the control and other treatments. Viscoelasticity showed similar trends for viscous and elastic moduli. Similarly, combined pressure processing and enzymatic treatment decreased viscoelasticity, while guar gum increased elasticity but decreased viscosity. Therefore, the tenderized physical properties and improved digestibility by enzyme and pressurization treatment could be used to produce age-friendly spreadable liver sausages.

• Applied Chemistry for Engineering
• /
• v.33 no.6
• /
• pp.618-623
• /
• 2022

The bipolar plate is a key component of the polymer electrolyte membrane fuel cell (PEMFC) that transfers reactants and electrons, discharges water and heat as by-products, and serves as a mechanical support for the membrane electrode assembly (MEA). Therefore, the flow field structure of the bipolar plate plays an important role in improving fuel cell performance. In this study, PEMFC performance was investigated with copper foams with different compressibility ratios applied to cathode bipolar plates using a 25 cm² unit cell. The total resistance decreased as the compressibility ratio of the metal foams increased, and, in particular, the charge transfer and mass transfer resistance were significantly improved compared to the serpentine flow field, lowering voltage loss in medium and high current density region. In the case of pressurized air reactant flow with serpentine structure, fuel cell performance was similar to that of a compressed metal foam flow field (S3) up to the medium current density region, but low performance appeared in the high current density region due to flow field structure limitations.

• Korean Journal of Materials Research
• /
• v.31 no.5
• /
• pp.296-300
• /
• 2021

Al-Cr-Si ternary quench ribbons are fabricated using a single roll method and investigated for their structural and thermal properties. In particular, the sinterability is examined by pulse current sintering to obtain the following results. The Al₇₄Cr₂₀Si₆ composition becomes a quasicrystalline single phase; by reducing the amount of Cr, it becomes a two-phase mixed structure of Al phase and quasicrystalline phase. As a result of sintering of Al₇₄Cr₂₀Si₆, Al₇₇Cr₁₃Si₁₀ and Al₉₀Cr₆Si₄ compositions, the sintering density is increased with the large amount of Al phase; the sintering density is the highest in Al₉₀Cr₆Si₄ composition. In addition, as a result of investigating the effects of sintering temperature and pressurization on the sintered density of Al₉₀Cr₆Si₄, a sintered compact of 99% or more at 513 K and 500 MPa is produced. In particular, since the Al-Cr-Si ternary crystal is more thermally stable than the Al-Cr binary quaternary crystal, it is possible to increase the sintering temperature by about 100 K. Therefore, using an alloy of Al₉₀Cr₆Si₄ composition, a sintered compact having a sintered density of 99 % or more at 613 K and 250 MPa can be manufactured. It is possible to increase the sintering temperature by using the alloy system as a ternary system. As a result, it is possible to produce a sintered body with higher density than that possible using the binary system, and at half the pressure compared with the conventional Al-Cr binary system.

• Nuclear Engineering and Technology
• /
• v.55 no.1
• /
• pp.169-179
• /
• 2023

Filtered containment system is a passive safety system that controls the over-pressurization of containment in case of a design-based accidents by venting high pressure gaseous mixture, consisting of air, steam and radioactive particulate and gases like iodine, via a scrubbing system. An indigenous lab scale facility was developed for research on iodine removal by venturi scrubber by simulating the accidental scenario. A mixture of 0.2 % sodium thiosulphate and 0.5 % sodium hydroxide, was used in scrubbing column. A modified mathematical model was presented for iodine removal in venturi scrubber. Improvement in model was made by addition of important parameters like jet penetration length, bubble rise velocity and gas holdup which were not considered previously. Experiments were performed by varying hydrodynamic parameters like liquid level height and gas flow rates to see their effect on removal efficiency of iodine. Gas holdup was also measured for various liquid level heights and gas flowrates. Removal efficiency increased with increase in liquid level height and gas flowrate up to an optimum point beyond that efficiency was decreased. Experimental results of removal efficiency were compared with the predicted results, and they were found to be in good agreement. Maximum removal efficiency of 99.8% was obtained.

• Imaging Science in Dentistry
• /
• v.53 no.1
• /
• pp.53-60
• /
• 2023

Purpose: This study evaluated maxillary sinus volume changes in military jet aircraft pilot candidates before and after the training program, in comparison with a control group, considering the effects of pressurization, altitude, and total flight hours, through multislice computed tomography. Materials and Methods: Fifteen fighter pilots were evaluated before initiating the training program and after the final approval. The control group consisted of 41 young adults who had not flown during their military career. The volumes of each maxillary sinus were measured individually before and at the end of the training program. Results: When comparing the initial and final volumes in the pilots, a statistically significant increase was observed both in the left and right maxillary sinuses. When evaluating the average total volume of the maxillary sinuses(i.e., the average volume of the right and left maxillary sinuses together), a significant increase in the volume of the maxillary sinuses was observed in the pilot group when compared to the control group. Conclusion: The maxillary sinus volumes in aircraft pilot candidates increased after the 8-month training program. This may be explained by changes in the gravitational force, the expansion of gas, and positive pressure from oxygen masks. This unprecedented investigation among pilots might lead to other investigations considering paranasal sinus alterations in this singular population.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.1066-1080
• /
• 2024

SMART100 has a containment pressure and radioactivity suppression system (CPRSS) for passive containment cooling system (PCCS). This prevents overheating and over-pressurization of a containment through direct contact condensation in an in-containment refueling water storage tank (IRWST) and wall condensation in a CPRSS heat exchanger (CHX) in an emergency cool-down tank (ECT). The Korea Atomic Energy Research Institute (KAERI) constructed scaled-down test facilities, SISTA1 and SISTA2, for the thermal-hydraulic validation of the SMART100 CPRSS. Three separate effect tests were performed using SISTA1 to confirm the heat removal characteristics of SMART100 CPRSS. When the low mass flux steam with or without non-condensable gas is released into an IRWST, the conditions for mitigation of the chugging phenomenon were identified, and the physical variables were quantified by the 3D reconstruction method. The local behavior of the non-condensable gas was measured after condensation inside heat exchanger using a traverse system. Stratification of non-condensable gas occurred in large tank of the natural circulation loop. SISTA2 was used to simulate a small break loss-of-coolant accident (SBLCOA) transient. Since the test apparatus was a metal tank, compensations of initial heat transfer to the material and effect of heat loss during long-term operation were important for simulating cooling performance of SMART100 CPRSS. The pressure of SMART100 CPRSS was maintained below the design limit for 3 days even under sufficiently conservative conditions of an SBLOCA transient.

• Journal of the Society of Disaster Information
• /
• v.13 no.2
• /
• pp.233-248
• /
• 2017

Uniform laws and regulations and reasonable design is necessary for the prevention of possible fire in super high-rise building. To this end, this study focused on super high-rise and massive building-related architectural review performance-based design (PBD) evaluation disaster impact assessment (DIA), and provided fire engineering measures for improving fire prevention on the basis of performance-based design by analyzing the buildings subject to these systems and problems in terms of contents. Above all, in the aspect of law and standard improvement, first, with regard to dual parts of two statutes though significant portion of them has the same contents in performance-based design (PBD) evaluation and disaster impact assessment (DIA), it is necessary to operate the systems after making them conform with each other and consolidating or abolishing them. Second, if it is impossible to consolidate or abolish performance-based design (PBD) evaluation and disaster impact assessment (DIA), the areas of contents of performance-based design (PBD) evaluation and disaster impact assessment (DIA) should be precisely classified and established. Next, engineering improvement measures against fire hazard in super high-rise building are as follows. First, it is necessary to revise the provisions of straight-run stairs in special escape stairs. And in case of installing a mechanical smoke exhaust system instead of smoke vent, sandwich pressurization used in the United Stated should be permitted. Second, with regard to smoke control system for special escape stairs, it was shown that there was necessity for revising the standards in order to enable air to be supplied according to section in case of fire, carrying out performance-based design, and the like from the early design stages to the completion stages. In the future, it is expected that an epoch-making contribution will be made to a decrease in casualties and property damage due to fire in case of super high-rise building where the results can be reflected after carrying out a study on maintenance and carrying out an additional study on other considerations of super high-rise building together with reflecting the improvement measures provided in the above-mentioned study.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.1
• /
• pp.126-135
• /
• 2007

This study was conducted to identify the effects of the oriental medicine Qigong Exercise on the brain power, HRV, pulsation, live blood condition among young boys and girls. The study was performed with two group(control group and experimental group) in a pre-test/post-test design. The subjects were 44 young boys and girls selected by a some middle school in Busan. The oriental medicine Qigong Exercise program consists of 80-minute sessions three times a week over 5 months. All of the subjects were examined on the congnition assessment tool, stress assessment tool, oriental medicine pulsation 3-D MAC, live blood condition analyzer Prior and post surveys were measured before and after the experiment. In the cognition assessment, the amplitude of ERS were increased afer Qigong Exercise. The Success and the Concentration were significantly increased afer Qigong Exercise, the Error was significantly decreased afer Qigong Exercise. The Cognition strength was significantly increased, but the Reponse time was not significantly decreased afer Qigong Exercise. And the Workload was not significantly decreased, the Total Score was not significantly increased afer Qigong Exercise. Among the stress assessment, RRV tachogram's ‘mean RR’ was significantly increased, ‘mean HRV’ was significantly decreased afer Qigong Exercise. SDNN was not significantly increased, Complexity was not significantly increased afer Qigong Exercise. And TP(RRV power's total power) was not significantly increased, VLF and HF was significantly increased, and LF was significantly decreased afer Qigong Exercise. ANS's norm LF was not significantly decreased, but norm HF was significantly increased afer Qigong Exercise. In the RRV's Phase Plot, RMSSD and SDSD were not significantly increased, pnn50 was not significantly decreased afer Qigong Exercise. On the whole, Parasympathetic Activity and Stress Endurance were significantly increased, but Cardiac Activity and Physical Arousal were not significantly increased afer Qigong Exercise. Cardiac Aging was not significantly decreased afer Qigong Exercise. Sympathetic Activity, Autonomic Nervous System Balance and Heart-load were not significantly decreased afer Qigong Exercise. In the pulsation, press power was increased(15%), and w/t(pressurization time / pulsation time) was decreased(20%) afer Oigong Exercise. And the live blood condition was not changed afer Qigong Exercise. As mentioned above; the oriental medicine Qigong Exercise program was identified the effects of the inspiration of the brain power, heart rate and anti-stress.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.11a
• /
• pp.131.1-131.1
• /
• 2010

This study was conducted for engineering optimization for the gasification process which is the key factor for success of Taean IGCC gasification plant which has been driven forward under the government support in order to expand to supply new and renewable energy and diminish the burden of the responsibility for the reduction of the green house gas emission. The gasification process consists of coal milling and drying, pressurization and feeding, gasification, quenching and HP syngas cooling, slag removal system, dry flyash removal system, wet scrubbing system, and primary water treatment system. The configuration optimization is essential for the high efficiency and the cost saving. For this purpose, it was designed to have syngas cooler to recover the sensible heat as much as possible from the hot syngas produced from the gasifier which is the dry-feeding and entrained bed slagging type and also applied with the oxygen combustion and the first stage cylindrical upward gas flow. The pressure condition inside of the gasifier is around 40~45Mpg and the temperature condition is up to $1500{\sim}1700^{\circ}C$. It was designed for about 70% out of fly ash to be drained out throughout the quenching water in the bottom part of the gasifier as a type of molten slag flowing down on the membrane wall and finally become a byproduct over the slag removal system. The flyash removal system to capture solid particulates is applied with HPHT ceramic candle filter to stand up against the high pressure and temperature. When it comes to the residual tiny particles after the flyash removal system, wet scurbbing system is applied to finally clean up the solids. The washed-up syngas through the wet scrubber will keep around $130{\sim}135^{\circ}C$, 40~42Mpg and 250 ppmv of hydrochloric acid(HCl) and hydrofluoric acid(HF) at maximum and it is turned over to the gas treatment system for removing toxic gases out of the syngas to comply with the conditions requested from the gas turbine. The result of this study will be utilized to the detailed engineering, procurement and manufacturing of equipments, and construction for the Taean IGCC plant and furthermore it is the baseline technology applicable for the poly-generation such as coal gasification(SNG) and liquefaction(CTL) to reinforce national energy security and create new business models.

• Composites Research
• /
• v.33 no.5
• /
• pp.235-240
• /
• 2020

In this study, in order to improve the impact resistance of the B₄C tile-inserted B₄C_p/Al7075 hybrid composite, a control method of the B₄C/Al7075 interface was developed and the characteristics of the controlled interface were analyzed. B₂O₃, Ni, and Si were coated on the B₄C tile surface using additional thermal oxidation, electroless plating, and plasma spraying. The coated B₄C tile is inserted into the B₄C_p/Al7075 composite material using the liquid pressurization method. Interfacial energy, bonding strength, and impact resistance were measured to analyze the effect of the coating. All coatings enhanced interfacial energy, bonding strength, and impact resistance, and in particular, it was confirmed that the impact resistance increased by 86.8% when B₂O₃ coating was used. This study is significant in developing and analyzing a core surface treatment method that improves the performance of B₄C/Al series composites, which are attracting attention as next-generation lightweight amour and bulletproof materials.