References
- K. Shozugawa, N. Nogawa, M. Matsuo, Deposition of fission and activation products after the Fukushima Dai-ichi nuclear power plant accident, Environmental Pollution 163 (2012) 243-247, https://doi.org/10.1016/j.envpol.2012.01.001.
- T.J. Solaija, N. Irfan, K.R. Qureshi, K. Waheed, A. Farooq, M. Ahmad, Filtered Containment Venting System (FCVS) for removal of elemental and organic iodine during severe nuclear power plant accidents, in: 2017 3rd International Conference on Power Generation Systems and Renewable Energy Technologies (PGSRET), IEEE, 2017, pp. 61-66, https://doi.org/10.1109/PGSRET.2017.8251802.
- IAEA, Severe Accident Mitigation through Improvements in Filtered Containment Vent Systems and Containment Cooling Strategies for Water Cooled Reactors, 2017. IAEA-TECDOC-1812.
- B. Handley, C. Coon, D.M. Marshall, Principles of Engineering, Cengage Learning, 2012.
- H.F. Johnstone, R.B. Feild, M.C. Tassler, Gas absorption and aerosol collection in a venturi atomizer, Industrial & Engineering Chemistry 46 (1954) 1601-1608, https://doi.org/10.1021/ie50536a028.
- S. Ali, K. Waheed, K. Qureshi, N. Irfan, M. Ahmed, W. Siddique, A. Farooq, Experimental Investigation of Aerosols Removal Efficiency through Self-Priming Venturi Scrubber, Nuclear Engineering and Technology, 2020, https://doi.org/10.1016/j.net.2020.03.019.
- S. Nukiyama, An experiment on the atomization of liquid by means of an air stream (1), J. Soc. Mech. Eng., Japan. 4 (1938) 128-135, https://doi.org/10.1299/kikai1938.4.15_138.
- R.H. Boll, L.R. Fiais, P.W. Maurer, W.L. Thompson, Mean drop size in a full scale venturi scrubber via transmissometer, Journal of the Air Pollution Control Association 24 (1974) 934-938, https://doi.org/10.1080/00022470.1974.10469991.
- G.A. Hughmark, Holdup and mass transfer in bubble columns, Industrial & Engineering Chemistry Process Design and Development 6 (1967) 218-220, https://doi.org/10.1021/i260022a011.
- H. Hikita, H. Kikukawa, Gas holdup in bubble columns. Effect of liquid properties, Bull. Univ. Osaka Prefect. Ser. A. 22 (1973) 151-160, https://doi.org/10.1021/i260045a015.
- S. Kumar, R.A. Kumar, P. Munshi, A. Khanna, Gas hold-up in three phase cocurrent bubble columns, Procedia Engineering 42 (2012) 782-794, https://doi.org/10.1016/j.proeng.2012.07.470.
- S. Sal, O.F. Gul, M. Ozdemir, The effect of sparger geometry on gas holdup and regime transition points in a bubble column equipped with perforated plate spargers, Chemical Engineering and Processing: Process Intensification 70 (2013) 259-266, https://doi.org/10.1016/j.cep.2013.03.012.
- S. Sasaki, K. Hayashi, A. Tomiyama, Effects of liquid height on gas holdup in air-water bubble column, Experimental Thermal and Fluid Science 72 (2016) 67-74, https://doi.org/10.1016/j.expthermflusci.2015.10.027.
- H. Hikita, S. Asai, K. Tanigawa, K. Segawa, M. Kitao, Gas hold-up in bubble columns, The Chemical Engineering Journal 20 (1980) 59-67, https://doi.org/10.1016/0300-9467(80)85006-4.
- B.J. Azzopardi, S. Teixeira, A.H. Govan, T.R. Bott, Improved model for pressure drop in venturi scrubbers, Process Safety and Environmental Protection 69 (1991) 237-245.
- X. Gamisans, M. Sarra, F.J. Lafuente, The role of the liquid film on the mass transfer in venturi-based scrubbers, Chemical Engineering Research and Design 82 (2004) 372-380, https://doi.org/10.1205/026387604322870480.
- M. Ali, C. Yan, Z. Sun, H. Gu, J. Wang, Study of iodine removal efficiency in self-priming venturi scrubber, Annals of Nuclear Energy 57 (2013) 263-268, https://doi.org/10.1016/j.anucene.2013.02.014.
- M. Ali, Y. Changqi, S. Zhongning, G. Haifeng, W. Junlong, K. Mehboob, Iodine removal efficiency in non-submerged and submerged self-priming venturi scrubber, Nuclear Engineering and Technology 45 (2013) 203-210, https://doi.org/10.5516/NET.03.2012.047.
- N.P. Gulhane, A.D. Landge, D.S. Shukla, S.S. Kale, Experimental study of iodine removal efficiency in self-priming venturi scrubber, Annals of Nuclear Energy 78 (2015) 152-159, https://doi.org/10.1016/j.anucene.2014.12.008.
- M. Bal, T.T. Reddy, B.C. Meikap, Performance evaluation of venturi scrubber for the removal of iodine in filtered containment venting system, Chemical Engineering Research and Design 138 (2018) 158-167, https://doi.org/10.1016/j.cherd.2018.08.019.
- J. Jung, J.B. Lee, H.Y. Kim, Experimental investigation of iodine decontamination performance of a filtered containment venting system in ARIEL facility, in: Proceeding of the 26th International Conference Nuclear Energy for New Europe, Bled, Slovenia, 2017.
- Y. Zhou, Z. Sun, H. Gu, Z. Miao, Performance of iodide vapour absorption in the venturi scrubber working in self-priming mode, Annals of Nuclear Energy 87 (2016) 426-434, https://doi.org/10.1016/j.anucene.2015.09.026.
- M. Ali, C. Yan, Z. Sun, H.F. Gu, M. Wang, Study of pressure drop model for self-priming venturi scrubber, in: 2012 Asia-Pacific Power and Energy Engineering Conference, IEEE, 2012, pp. 1-4, https://doi.org/10.1109/APPEEC.2012.6306987.
- M. Ravindram, P. Naidu, Modeling of a venturi scrubber for the control of gaseous pollutants, Industrial Engineering Chemistry Process Design Development 25 (1986) 35-40, https://doi.org/10.1021/ie00066a037.
- P.M. Wilkinson, H. Haringa, L.L. van Dierendonck, Mass transfer and bubble size in a bubble column under pressure, Chemical Engineering Science 49 (1994) 1417-1427, https://doi.org/10.1016/0009-2509(93)E0022-5.
- J. Wen, H. Gu, Z. Sun, Y. Zhou, A theoretical model and experiment validation on filtration characteristics of methyl iodide in bubble column, International Journal of Heat Mass Transfer 114 (2017) 1263-1273, https://doi.org/10.1016/j.ijheatmasstransfer.2017.07.023.
- M.A.R. Talaia, Terminal velocity of a bubble rise in a liquid column, World Academy of Science, Engineering Technology 28 (2007) 264-268.
- R.L. Steinberger, R.E. Treybal, Mass transfer from a solid soluble sphere to a flowing liquid stream, AIChE Journal 6 (1960) 227-232, https://doi.org/10.1002/aic.690060213.
- K. Akita, F. Yoshida, Bubble size, interfacial area, and liquid-phase mass transfer coefficient in bubble columns, Industrial & Engineering Chemistry Process Design and Development 13 (1974) 84-91, https://doi.org/10.1021/i260049a016.
- A. Mandal, G. Kundu, D. Mukherjee, A comparative study of gas holdup, bubble size distribution and interfacial area in a downflow bubble column, Chemical Engineering Research and Design 83 (2005) 423-428, https://doi.org/10.1205/cherd.04065.
- M. Bouaifi, G. Hebrard, D. Bastoul, M. Roustan, A comparative study of gas hold-up, bubble size, interfacial area and mass transfer coefficients in stirred gas-liquid reactors and bubble columns, Chemical Engineering and Processing: Process Intensification 40 (2001) 97-111, https://doi.org/10.1016/S0255-2701(00)00129-X.
- R. Maceiras, E. Alvarez, M.A. Cancela, Experimental interfacial area measurements in a bubble column, Chemical Engineering Journal 163 (2010) 331-336, https://doi.org/10.1016/j.cej.2010.08.011.