• 한국압력기기공학회 논문집
• /
• 제7권3호
• /
• pp.8-14
• /
• 2011

The clogging of the flow area at the tube support plates(TSPs), especially at the upper TSPs results in the water level oscillation of a steam generator during normal operation. A reduction of the TSP flow area causes to increase in pressure drop within the two-phase flow zone, which destabilizes the boiling flow through the tube bundle. This phenomenon was occasionally observed at a few domestic and foreign nuclear power plants. One of the methods for defining the flow area clogging is visual inspection, which is the most effective inspection method. The results of the visual inspection for TSPs' flow area are clogging images on TSPs' quartrefoil lobes. These images are complexly distorted due to lens aberration and external factors like the distance to a subject and angle etc. In this work, we developed the analysis algorithm for clogging image of the TSP flow area of steam generators. For this purpose, we designed an image verification device applicable to the camera employed in the field for visual inspection and then, we demonstrated the validity of image analysis algorithm by using this device and commercial autoCAD program.

• 공업화학
• /
• 제19권1호
• /
• pp.80-85
• /
• 2008

촉매와 필터가 결합된 촉매필터는 먼지와 가스상 물질을 동시에 제거할 수 있으며 이로 인해 운영비와 설치공간의 감소가 가능한 다기능 반응시스템으로 다양한 환경분야에 적용이 가능하다. 본 연구는 실험실 규모 반응시스템에서 촉매필터를 이용한 먼지와 할로겐 휘발성 유기화합물(halogenated volatile organic compound, 1,2-dichlorobenzene) 제거 연구를 수행하였다. 촉매필터는 저온활성이 우수한 매그린사의 $WO_3-V_2O_5/TiO_2$ 촉매와 $250^{\circ}C$ 이하에서 사용 가능한 P-84를 이용하여 제조하였다. 온도, 면속도, 먼지농도와 같은 다양한 변수조절을 통한 촉매필터의 촉매활성과 먼지제거 효율을 평가하였다. 촉매활성은 온도와 촉매 담지량에 따라 증가하였다. 먼지제거효율은 면속도에 가장 많은 영향을 받는 것으로 나타났다. 시간에 따른 필터의 차압변화 평가 결과 virgin 필터의 경우 탈진간격은 급격한 감소를 보였으며, 잔류압력감소는 거의 변하지 않았다. 촉매필터의 경우 전단에 고착된 나노섬유의 미끄럼 특성에 의하여 차압증가폭이 낮게 나타났다. 촉매필터는 1 m/min, $210^{\circ}C$에서 99.98% 이상의 탈진효율과 90% 이상의 1,2-DCB 제거 효율을 나타냈다.

• 한국가스학회지
• /
• 제16권3호
• /
• pp.1-7
• /
• 2012

고압으로 수송되는 천연가스를 수요처에 공급하는 정압기지에서는 강제로 감압하여 보내준다. 이 때, 버려지는 압력에너지를 회수하는 방법으로 터보팽창기를 이용한 전력생산이 가능하며, 터보팽창기는 정압과 전력생산의 두 가지 기능을 동시에 수행하게 된다. 터보팽창기에서 생산되는 전력의 양은 유동전후의 엔탈피 차이며, 경제성에 영향을 미치는 주요인자로는 설비비, 전력생산량, 예열량, 전력가격, 가스가격의 5가지이다. 입구와 출구의 압력과 온도 조건이 고정되므로, 전력생산량은 결국 유량에 좌우된다. 따라서, 천연가스 수요의 계절별 수급변화 패턴에 따른 터보팽창기 적정용량을 결정하는 것이 경제성확보의 핵심기술이다. 유동량변화가 심한 경우의 전력생산량 산정법의 algorithm을 제시하였으며 이를 사용한 case study를 수행하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1681-1686
• /
• 2000

Absorption silencer is one of the most noise reduction devices and covered a wide range of noise matters. On account of the acoustical properties of absorption silencers depend on variable factor and complex matters, the design of silencers couldn't to be exact in various fields. In this study, we predicted the acoustical properties of absorptive silencers based on measured data and assumed how the acoustical properties is changed following baffle thickness, variable baffle form and open area. Also we recorded the pressure drop at each other. So it may a great help to engineer who install and design a silencer in various fields.

• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.85-93
• /
• 2001

Minimized canister flow restriction and maximized flow uniformity are desired to maximize a purge capability. With the impending ORVR(On Board Refueling Vapor Recovery) systems, the reduction of restriction and increase of flow uniformity in a carbon canister becomes even more critical to meet the stringent regulation. In this study, three-dimensional numerical simulations have been performed to investigate the three-dimensional internal flow patterns in a carbon canister during purge. The effects of the declined angle of the purge pipe and the number of partitions on the pressure drop and purge efficiency in a carbon packed bed are examined. Results show that the purge efficiency and space velocity distribution are affected in the upstream region of 40% of total canister bed by porosity of carbon granule and angle of purge pipe. It is also found that the purge efficiency decreases with increasing the number of partitions.

• 한국자동차공학회논문집
• /
• 제12권5호
• /
• pp.205-210
• /
• 2004

Sub-cooled hybrid condenser(SCHC) which have been developed through this study is an appliance of integrating a condenser with a receiver dryer, which were previously separated. It is supposed that the development of sub-cooled hybrid condenser will be able to reduce not only weight, size, production process and cost, but also quite improve in capability, which will be of great use for the technological development and research of an air conditioning system whose importance is higher in a car. Through the present study it was found that the developed SCHC increases in the degree of sub-cooling by 10∼100% compared to conventional condenser. The excessive sub-cool has improved the cooling performance by 10%, and that leads to the reduction in evaporator outlet air temperature $1.5^{\circ}C$. Additionally, it is expected that sub-cooled hybrid condenser weights less by 100g than the previous condensers which has equal super heat.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2005년도 특별논문집
• /
• pp.198-205
• /
• 2005

Reduction of labor hour for cleaning up of the used abrasives after blasting. is attempted by improving the efficiency of abrasive recovery process in the protective coating of ship's block, For this purpose, the theoretical background for pneumatic transport technology in the abrasive recovery system as well as experimental evaluation on the effect of design parameters such as flow pattern, saltation velocity and pressure drop on the efficiency of the abrasive recovery system are employed . By optimizing the operating parameters such as the length and diameter of the suction hose, specification of recovery device and recovery mouth, a new method which can dramatically increase the efficiency of abrasive recovery system, is proposed.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.483-488
• /
• 2006

In this study, newly-developed slim electronic panel cooler with aluminum PF condenser and evaporator was tested and the results are compared with imported panel cooler with fin-tube heat exchangers. The PF heat exchangers significantly (approximately 45%) reduced the refrigerant charge. The air-side pressure drop was also reduced, which resulted in the reduction of the sound level of the panel cooler. The effect of the condenser size was also investigated.

• 한국전산유체공학회지
• /
• 제15권1호
• /
• pp.56-63
• /
• 2010

Since emission regulations for vehicles have become more stringent, SCR technology has drawn a strong attention in order to reduce NOx emissions. Optimal design of a reductant injection nozzle and a multi-hole plate located between the cone and catalyst is critical in that the uniform distribution of reductant is necessary to maximize the NOx conversion efficiency and minimize the slip of reductant in SCR. In this work, an LPG fuel(C3H8 in vapor state) was used as a reductant for LPG vehicles. A Realizable k-$\varepsilon$ model is used for turbulence, and SCR body is defined as porous media with inertia and viscous resistances measured in this work. Effect of the number of nozzle holes on the flow mixing index was analyzed, which revealed that a four hole nozzle shows the best performance in terms of uniformity of flow. An installment of a multi-hole plate at the entrance of catalyst was evaluated with flow mixing index, uniformity of flow, and pressure drop. A multi-hole plate with gradual hole diameter change in three steps showed the best uniformity of flow within the conditions suggested in this work.

• 대한기계학회논문집A
• /
• 제38권6호
• /
• pp.669-676
• /
• 2014

국내 승용차용 삼원촉매담체의 경우 배기가스 변환 효율이나 압력 강하 등은 엔진 효율 측면에서 만족되고 있지만 열적 내구성은 요구 내구 수명을 만족시키지 못하여 차량정비현장에서 상당한 파손사고가 발견되고 있다. 본 논문에서는 이러한 현상의 원인을 밝히기 위하여 국내 승용차용 삼원촉매담체에서 발생되는 열응력을 온도측정자료와 단순한 열응력 모델을 이용하여 구하였으며 열피로 성능은 확정론적 강도가 아닌 확률과 크기 및 피로 인자를 고려한 확률론적 설계 강도로 평가함으로서 확정론적 설계 강도에 의한 열피로 성능 평가 방법을 극복하였다.