• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.749-753
• /
• 2012

In present work, anode support for micro-tubular SOFC was fabricated with outer diameter of 3 mm and characterized with microstructure, mechanical properties and gas permeability. The microstructure of surface and cross section of a porous anode support were analyzed by using SEM (Scanning Electron Microscope) image. The gas permeability and the mechanical strength of anode support was measured and analysed by using differential pressure at the flow rates of 50, 100, 150 cc/min. and using universal testing machine respectively. The unit cell composed of NiO-YSZ, YSZ, YSZ-LSM/LSM/LSCF was fabricated and operated with reaction temperature and fuel flow rate and showed maximum power density of $1095mW/cm^2$ on the condition of $800^{\circ}C$. The performance of single cell for micro-tubular SOFC increased with the increasing the reaction temperature due to the decrement of ohmic resistance of cell by the increment of the ionic conductivity of electrolyte through the evaluation of electrochemical impedance analysis for single cell with reaction temperature.

• Journal of the Korean GEO-environmental Society
• /
• v.13 no.1
• /
• pp.53-61
• /
• 2012

In this study, the research on MC anchor has been developed as composite type has done. MC anchor exerts bearing pressure on pre-bored hole where the end fixing device is expanded. Therefore, the uplift capacity is to be increased and it has the characteristics that the anchor body is not eliminated from the ground even if the grouting is not carried out properly. Furthermore, it reduces the loss of tension and raises the construction availability by inserting the reinforced bar as well as the anchor cable, while it can improve the long-term stability because the nail is expected to play the role when the loss of the anchor cable is occurred in a long-term. However, because the resistance mechanism of the compound anchor such as MC anchor is different from friction anchor, the estimation method of the uplift capacity by the frictional force of the ground and the grout is not proper. Particularly, in domestic cases, the problem to overestimate or underestimate the uplift capacity is expected because the design method considering the soil characteristics about the compound anchor has not been developed. Therefore, in this study, in order to evaluate the characteristics of MC anchor and a kind of compound anchor, we measured the uplift, the tension and the creep by nine anchors tests in shale ground that the fluctuation of the strength is great. In addition, we analyzed the test result comparing to the result of the general friction anchor and evaluated the characteristics of MC anchor movement to gather the results. As a result of the test, we found the effect that the uplift capacity is increased in shale ground comparing to the general friction anchor.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.3
• /
• pp.145-152
• /
• 2013

This study aimed to investigate the growth and physiological characters of Liriodendron tulipifera seedlings in responses to two different levels of elevated air temperature and $CO_2$ concentration. The seedlings were grown in environment-controlled growth chambers with two combinations of air temperature and $CO_2$ conditions: (1) $22^{\circ}C$ + ambient $CO_2$ $380{\mu}mol\;mol^{-1}$ and (2) $27^{\circ}C$ + $770{\mu}mol\;mol^{-1}$. Physiological characters such as growth, photosynthesis, and water use efficiency, were monitored for 85 days. The seedlings under the elevated treatment showed a greater amount of growth in tree height, compared with those under the control. Regarding the characteristics of assimilatory organs, the elevated treatment resulted in a greater amount of total leaf area, leaf unfolding, and dry weight per leaf area. No significant differences were found in photosynthesis capacity between the two treatments. The increase in water use efficiency with increased intercellular $CO_2$ partial pressure appeared overall lower in the seedling under the elevated treatment, compared with those under the control. The total leaf area of the seedlings under the elevated treatment was larger than that under the control, indicating a higher amount of photosynthesis. In addition, an increase of root growth was noted under the elevated treatment. A resistance mechanism of water stress may be attributed to a higher amount of organ growth as well as the tree height under the elevated treatment than the control.

• The Journal of the Korea Contents Association
• /
• v.20 no.11
• /
• pp.525-533
• /
• 2020

The purpose of this study is to analyze how the ten-week complex exercise program for obese postpartum women affects their metabolic syndrome related risk factors (HDL-C, TG, Glucose, blood pressure, and waist circumference) and adipocytokines (Leptin and Adiponectin). The study subjects were 14 women who passed less than 40 months after their child birth, among whom seven were assigned to complex exercise group and seven to control group. The complex exercise program consists of rhythm dance aerobic exercise and resistance exercise. It has been performed twice a week for 10 weeks, and 80 minutes for each session. For data analysis, Mann Whitney U-test, Wilcoxon test, Spearman correlation analysis were conducted. As a result, the groups had no difference in all of the metabolic syndrome related risk factors before and after the program. Regarding intra-group difference, the complex exercise group significantly increased HDL-C, and significantly decreased TG, Glucose, and waist circumference, and the control group signfiicantly increased TG and Glucose. According to the analysis on adipocytokines, in terms of intra-group difference, the complex exercise group significantly increased Adiponectin after exercise. With regard to the correlations between metabolic syndrome related risk factors and adipocytokines, HDL-C and Glucose had a correlation with Adiponectin.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.9 no.2
• /
• pp.231-239
• /
• 1999

The microstructure of ceramic composite has been found to be governed by the type and amount of the secondary phase, the sintering aid, and the sintering conditions such as sintering temperature, pressure and holing time. Moreover, tribological properties are strongly dependent on microsturcture of composite and operating conditions. In this study, silicon nitride with various amount of magnesia as a sintering aid were prepared and sintered by a hot pressing (HP) technique. Microstructure, mechanical properties (hardness, strength, and fracture toughness), and tribological properties in different environments of $Si_{3}N_{4}$ (in air, water, and paraffine oil) were investigated as a function of MgO content in $Si_{3}N_{4}$. As increasing the amount of MgO in $Si_{3}N_{4}$, the glassy phase in the grain boundaries enlarged the $\beta$-phase elongated grains, and also degraded the Hertzian contact damage resistance. Tribological behaviors in air was seemed to be determined by fracture toughness of $Si_{3}N_{4}$, and those in water and paraffin oil was seemed to be determined by hardness as well as strength. Since glassy grain-boundary phase (MgO) in $Si_{3}N_{4}$ expected to be reacted with water during sliding, such tribochemical reaction reduced wear. In paraffin oil under a higher applied load, the initial sliding dominated wear rate because of Hertzian contact damage.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.9
• /
• pp.1340-1349
• /
• 2017

Objective: This study aimed to evaluate the microbiological and cellular milk profile for the diagnosis of subclinical mastitis in female buffaloes and to assess risk factors for predisposition of the disease. Methods: Analyses were carried out by standard plate count (SPC), identification of species and antibiotic resistance, somatic cell count (SCC), electrical electrical conductivity of milk (ECM), and lactoferrin content in milk. Teat cups were swabbed to evaluate risk factors, observing hyperkeratosis, milking vacuum pressure and cleanliness of the site. Hence, 30 female buffaloes were randomly selected (15 from a group in early lactation and 15 in late lactation). Results: The most common bacteria in the microbiological examination were Staphylococcus spp., Streptococcus spp. and Corynebacterium sp. In the antibiotic sensitivity test, 10 (58.82%) of the 17 antibiotics tested were sensitive to all isolates, and resistant bacteria were Streptococcus uberis, Streptococcus dysgalactiae, Streptococcus haemolyticus, and Escherichia coli. It was observed that positive samples in the microbiological examination showed total bacterial count between $9.10{\times}10^3$ to $6.94{\times}10^6$ colony forming units/mL, SCC between 42,000 to 4,320,000 cells/mL and ECM ranging from 1.85 to 7.40 mS/cm. It was also found that the teat cups had high microbial counts indicating poor hygiene, and even faults in the cleanliness of the animals' waiting room were observed. It is concluded that values of SCC above 537,000 cells/mL and ECM above 3.0 mS/mL are indications of mammary gland infection for this herd; however, the association of these values with a microbiological analysis is necessary to more accurately evaluate the health status of mammary glands with subclinical mastitis. Conclusion: Through phenotypic characterization of bacteria involved in the samples, the genera Staphylococcus spp., Streptococcus spp., and Corynebacterimum bovis were the most prevalent in this study. Faults in environment and equipment hygienization are factors that are directly associated with mastitis.

• Korean Journal of Agricultural Science
• /
• v.41 no.4
• /
• pp.473-480
• /
• 2014

Upon setting up a dedicated plastic greenhouse for tomato cultivation developed by the Rural Development Administration on the Gyehwa reclaimed land, this study was aimed at analyzing the problems can be occurred in the installation of plastic greenhouse on reclaimed lands as well as finding out solutions for improvement. A relatively cheaper wooden pile was used in the installation in order to supplement the soft ground conditions. Based on the results of ground investigation of the installation site, both the allowable bearing capacity and pulling resistance of the wooden pile with a diameter of 150 mm and a length of 10 m were computed and came out to be 30.645 kN. It was determined that the values were enough to withstand the maximum compressive force (17.206 kN) and the pullout force (20.435 kN) that are generally applied to the greenhouse footing. There are three problems aroused in the process of greenhouse installation, and the corresponding countermeasures are as follow. First, due to the slightly bent shape of the wooden pile, there were phenomenon such as deviation, torsion, and fracture when driving the pile. This could be prevented by the use of the backhoe (0.2) rotating tongs, which are holding the pile, to drive the pile while pushing to the direction of the driving and fixing it until 5 m below ground and applying a soft vibrating pressure until the first 2 m. Second, there exists a concrete independent footing between the column of the greenhouse and the wooden pile driven to the underground water level. Since it is difficult to accurately drive the pile on this independent footing, the problem of footing baseplate used to fix the column being off the independent footing was occurred. In order to handle with this matter, the diameter of the independent footing was changed from 200 mm to 300 mm. Last, after films were covered in the condition that the reinforcing frame and bracing are not installed, there was a phenomenon of columns being pushed away by the strong wind to the maximum of $11m{\cdot}s^{-1}$. It is encouraged to avoid constructions in winter, and the film covering jobs always to be done after the frame construction is completely over. The height of the independent footing was measured for 9 months after the completion of the greenhouse installation, and it was found to be within the margin of error meaning that there was no subsidence. The extent to the framework distortion and the value of inclinometers as well showed not much alteration. In other words, the wooden pile was designed to have a sufficient bearing capacity.

• Journal of Science of Art and Design
• /
• v.6
• /
• pp.140-202
• /
• 2004

Body means 1)the whole structure and substance of a man, animal, or plant 2) the trunk or torso of a man or animal 3) part of garment that covers the trunk 4) the fresh or material substance, as opposed to the spirit. Human body could be distinguished as fresh and spirit. Body has the meaning of physicality. Physical means the bodily and constitution, but in the meaning of constitution there is the content of spirituality. Physicality means the appearing or arising of trace or image or nuance of body. The paintings which are using bodies are 1) directly draw bodies 2) twisting or transformation or nuance of the body and highly upgrade the physical emotion or fantastic bodily nuance 3) directly rubbing artist's body on the surface of painting with pigments to elect tactile specification. These physical art have appeared broadly by various artists, mainly with the social aspects of sex, drug, psycho sexual issues. In case of Joel peter Whitkin, the reason of strong physicality in the art is from the mind of the rejection and resistance of real world which is targeting top, perfect and beauty. Further explanation, being the world which is separated top and under, men and women, beauty and ugly; further in the situation, the hierarchy, terror and pressure began and many difficult problems has derived. The contents of attacking feminists's art works are very obscene to reveal female and male's phallus strongly. Sometime, it is strongly related in the political issues. The physical paintings have strong meanings in the action by hands and feet. It supports that it could reveal the humanity with smell, breath, and traces of bodies. In the bodies, the origin of life begins which gives human life by blood lines and water. Sometime, the physical paintings are made by the blood and urine to stick the physicality for special nuance. The physical paintings are made by the image of penis and clitoris which are related in the image of urinating, ejaculation and sometime is symbolized as pens and candles to drop liquid. The selected painters who are related in physical painting are Jackson Pollock, Andrea Serano, Eve Klein, Francis Bacon, Francesco Clemente, Lichard Long, Jakes & Dinos Chapman, Anselm Kiefer, Kiki Smith and Park, Ki Woong. Francis Bacon's style is destructive in representing human shapes which give us special message about the unbearable activity of men politician, high brain, wealthy and religious people. Francesco Clemente's method is to use throat, ear hole, mouse, clitoris, belly nostrils and every holes of body to transmute human physical body. Lichard Long uses directly his body in drawing the surface of painting by using liquid of mud Jakes & Dinos Chapman destroys or transforms the bodies of human. It sometime appears wrong location of the bodies that the penis and vulva is in between human faces or nose of women, Anselm Kiefer uses human hair for representing the human decaying martyrs, and indirectly using straw, he gives special ritual action to repent the Nazi's fault. From 2002 to 2003, Park KI Woong used women womb images to intermingle the smoke shape of <9.11 terror, 2001> in New York to reveal the painful situation of the time(*).

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.1
• /
• pp.59-66
• /
• 2005

[ $TiO_2$ ] was deposited by DC magnetron sputtering on glass surface under various sputtering parameters such as discharge power($0.6{\sim}5.2\;kW$, substrate temperature($R.T{\sim}350^{\circ}C$), Ar and $O_2$ flow ratio with $0{\sim}50\;sccm$($Ar+O_2$ 90 sccm) and about 1 mtorr of pressure. TiO-N thin film was prepared under same sputtering conditions for $TiO_2$ thin film except flow ratio($Ar+O_2+N_2$ 90 sccm). The sheet resistance of thin films deposited under these parameters was measured to analyze electronic characteristic and thin film's thickness(${\alpha}$-step), surface roughness(AFM) and formation construction(FE-SEM, XRD) were also measured to draw optimal sputtering parameters. In order to evaluate photo-activity of thin film($TiO_2$, TiO-N) made in optimal parameters for removal of pollutants, toluene among VOCs and Suncion Yellow among reactive dyes were chosen to probe organic compounds for photo-degradation. It was shown that the photo-catalytic thin films had a significant photo-activation for the chosen contaminants and especially TiO-N thin film showed maximum efficiency of 33% for toluene(5 ppm) removal in visible-light range.

• The Journal of Engineering Geology
• /
• v.26 no.1
• /
• pp.51-61
• /
• 2016

New building methods are needed to aid increased inner-city redevelopment and industrial construction. A particular area of improvement is the efficient use of cut slopes, with the minimization of associated problems. A retaining wall of precast panels can resist the horizontal earth pressure by increasing the shear strength of the ground and reinforcing it through contact with the panels. Precast panels allow quick construction and avoid the problem of concrete deterioration. Other problems to be solved include the digging of borrow pits, the disposal of material cut from the slope, and degradation of the landscape caused by the exposed concrete retaining wall.This study suggest the methods of improvement of an existing precast panel wall system by changing the appearance of the panels to that of natural rock and improving the process of adhering the panel to a vertical slope. The panels were tested in the laboratory and in the field. The laboratory test verified their specific strength and behavior, and the field test assessed the panels' ground adherence at a vertical cutting. Reinforcement of the cutting slope was also measured and compared with the results of 3D numerical analysis. The results of laboratory test, identified that the shear bar increase the punching resistance of panel. And as a results of test construction, identified the construct ability and field applicability of the panel wall system adhered to in-situ ground. In addition to that, extended measurement and numerical analysis, identified the long-term stability of panel wall system adhered to in-situ ground.