• 대한기계학회논문집A
• /
• 제36권11호
• /
• pp.1441-1446
• /
• 2012

유압피스톤모터는 정압베어링부분의 마찰손실과 용적손실, 기구적 운동부분의 마찰손실, 오일의 관로저항에 의한 압력저하, 압축성에 의한 체적손실 그리고 하우징 오일 처닝(churning) 손실 등이 있다. 이러한 손실 중에서 일정한 틈새의 유막(oil film, $8{\sim}15{\mu}m$)으로 고속 회전하는 피스톤 슈(piston shoe)와 슈 플레이트(shoe plate) 사이 정압베어링 부분의 마찰 및 용적손실이 유압모터의 전체효율을 좌우 한다. 본 연구에서는 최고압력 35MPa, 최고회전수 2500rpm, 배재용적 320cc/rev급 2속(2-speed) 초대형 굴삭기의 주행모터용 유압피스톤모터를 대상으로 정압베어링비가 유압모터의 전 효율에 미치는 영향을 실험적으로 분석하였다.

• 화약ㆍ발파
• /
• 제34권4호
• /
• pp.1-9
• /
• 2016

수중 강재 절단을 위해 내압성, 유연성의 외부장치인 스프링 호스와 가소성 성형폭약을 결합한 수중 성형폭약 장치를 고안하였다. 최적조건 설계를 위한 기초실험으로 외부장치의 형상에 따른 관입성능을 비교하였다. 실험결과를 평가하기 위하여 관입 된 강재에 액상 고무를 이용하여 모형을 획득한 후 이미지 분석을 하였고, 성형폭약의 관입 과정을 모사하기 위해 AUTODYN 프로그램을 이용하여 해석하였다. 분석결과 원형 및 사각 외부장치의 평균 관입 깊이는 유사하였으나 관입품질은 원형의 경우 더 균일하였다. 또한, 사각의 경우 침투현상이 발생하였고, 수압증가에 따른 변위가 원형대비 크게 측정되었다.

• 한국식생활문화학회지
• /
• 제35권5호
• /
• pp.493-502
• /
• 2020

The objective of this study was to investigate the effects of dietary vitamin B intake on biomarkers related to lipid metabolism, inflammation and blood glucose control, that are important in the development of type 2 diabetes and its complications. Seventy-six adults (42 males, 34 females) were recruited from a group of diabetes patients who had visited the medical center for treatment. Data on anthropometric characteristics and dietary intake of thiamine, riboflavin, niacin, vitamin B₆ and folate were collected using 24-hour diet recall and the CAN Pro 4.0 program. Also, data on clinical indices such as serum lipids, blood pressure, high-sensitivity C-reactive protein (hs-CRP), hemoglobin A1c (HbA1c) and homeostasis model assessment 2-insulin resistance (HOMA2-IR) were collected and analyzed for correlation with dietary vitamin B intake. Results from the dietary intake survey showed that riboflavin and folate intake (in males) and folate intake (in females) were below the Dietary Reference Intake for Koreans. Statistical analysis revealed a negative correlation between hs-CRP and dietary intake of B vitamins. Riboflavin intake was inversely associated with systolic blood pressure after adjustments for age, BMI, smoking, alcohol consumption, exercise, ingestion of diabetes mellitus medication and energy intake (p<0.05). Our results suggest that dietary vitamin B may influence inflammation and consequently may help in better management of type 2 diabetes.

• Journal of Biosystems Engineering
• /
• 제31권4호
• /
• pp.342-348
• /
• 2006

Aerial application using an unmanned agricultural helicopter became necessary for both labor saving and timely spraying. In the previous paper, a rotor system was developed and lift capability was evaluated. The experimental results were compared with simulated predictions using the CFD-ACE program. From the simulation, the relative velocity on the top surface of the blade airfoil increased, resulting in the pressure drop. The CFD analyses were revealed that a drag resistance on the leading edge of the airfoil, a wake at the trailing edge, and a positive pressure underneath the bottom surface were observed. As the results of the simulation, total lifts of 56.8, 74.4 and $95.0kg_f$ were obtained at the 6, 8 and $10^{\circ}$ of AAT (angle of attack), respectively. The simulation results agreed reasonably up to $10^{\circ}$ of AAT. However, at a greater AAT $(<12^{\circ})$ the simulated total lift continuously increased to $105kg_f$, comparing with a decreasing experimental total lift due to the lack of engine power. At a stiff angle of $18^{\circ}$ AAT, a wake was observed at the trailing edge of the airfoil. A rated operating condition determined from the previous paper was also verified through the simulation.

• Wind and Structures
• /
• 제20권3호
• /
• pp.449-468
• /
• 2015

Current wind-resistance designs of large-scale indirect dry cooling towers (IDCTs) exclude an important factor: the influence of the ventilation rate for radiator shutter on wind loads on the outer surfaces of the tower shell. More seemingly overlooked aspects are the effects of various ventilation rates on the wind pressure distribution on the tower surfaces of two IDCTs, and the feature of the flow field around them. In order to investigate the effects of the radiator shutter ventilation rates on the aerodynamic interference between IDCTs, this paper established the numerical wind tunnel model based on the Computational Fluid Dynamic (CFD) technology, and analyzed the influences of various radiator shutter ventilation rates on the aerodynamic loads acting upon a single and two extra-large IDCTs during building, installation, and operation stages. Through the comparison with the results of physical wind tunnel test and different design codes, the results indicated that: the influence of the ventilation rate on the flow field and shape coefficients on the outer surface of a single IDCT is weak, and the curve of mean shape coefficients is close to the reference curve provided by the current design code. In a two-tower combination, the ventilation rate significantly affects the downwind surface of the front tower and the upwind surface of the back tower, and the larger positive pressure shifts down along the upwind surface of the back tower as the ventilation rate increases. The ventilation rate significantly influences the drag force coefficient of the back tower in a two-tower combination, the drag force coefficient increases with the ventilation rate and reaches the maximum in a building status of full ventilation, and the maximum drag coefficient is 11% greater than that with complete closure.

• 여성건강간호학회지
• /
• 제16권3호
• /
• pp.224-233
• /
• 2010

Purpose: This study explored the relationships among obesity, bone mineral density, and cardiovascular risks in post-menopausal women. Methods: One hundred post-menopausal women were recruited via convenience sampling from osteoporosis prevention program participants who were living in a metropolitan city in September 2006. Obesity was evaluated by body mass index, bone mineral density measured by DEXA scan, and cardiovascular risk factors assessed by a guideline of American Heart Association. Results: Seventy-two percent of women were either in the osteopenia or osteoporosis group, while 28% were in normal range in lumbar vertebrae. Obese women had greater bone mineral density in lumbar (F=3.31, p=.040) and femur (F=4.72, p=.011). Variables for cardiovascular risks were significantly different for high density lipoprotein (F=7.51, p=.001), systolic blood pressure (F=5.21, p=.007), and in percent of 10-year cardiovascular disease risk according to obesity. Conclusion: Post-menopausal women are at risk for obesity, osteoporosis, and cardiovascular disease. In order to prevent these conditions, nursing interventions such as resistance and aerobic exercise that reduces body weight and bone loss, increases high density lipoprotein, and reduces systolic blood pressure, should be proposed continually through health promotion programs for postmenopausal women.

• Journal of Chest Surgery
• /
• 제24권3호
• /
• pp.310-321
• /
• 1991

Between April 1986 and September 1990, 34 patients with a single or dominant right ventricle underwent modified Fontan procedure for definite palliation in Seoul National University Children`s Hospital. Their age at operation ranged from 8 months to 14 years [Mean 5.5 years]. The ventricular chamber was solitary and of indeterminate trabecular pattern in 6 patients. 28 patients had posteriorly located rudimentary chamber, all of which were trabecular pouches having no communication with outlet septum. The patterns of atrioventricular connection were common inlet[9], double inlet [11], left atrioventricular valve atresia [12] and right atrioventricular valve atresia with L-loop [2]. Pulmonary outflow tracts were atretic in 7 patients and stenotic in 26 patients. Major associated anomalies included anomalous systemic venous drainage [15], dextrocardia [12] and total anomalous pulmonary venous connection[3]. Shunt operations were previously performed in 13 patients and pulmonary artery banding and atrial septectomy in 1 patients. Surgery included intraatrial baffling in 26 patients, bidirectional cavopulmonary shunt in 13 patients, atrioventricular valve obliteration in 3 patients and atrioventricular valve replacement in 3 patients. Central venous pressure measured postoperatively at intensive care unit ranged from 18cm H2O to 28cm H2O [mean 23.2cm H2O]. Hospital mortality was 35.3% [12/34], all died out of low output syndrome. Suspected causes of low output syndrome include ventricular dysfunction [8], hypoplastic or tortuous pulmonary artery [2] and elevated pulmonary vascular resistance [2]. 19 patients had 31 major complications including low output syndrome [18], arrhythmia [4], acute renal failure [3] and respiratory failure [3]. Mortality rate was significantly higher in the groups receiving intraatrial baffling and AV valve replacement respectively [p<0.05]. 20 patients were followed up postoperatively with the mean follow-up period 15.0$\pm$11.6 months. There were no late death and follow-up catheterization was performed in 10 patients. Mean right atrial pressure was 15.4$\pm$6.8mmHg and ventricular contraction was reasonable in all but one case. Thus, Fontan principle can be applied successfully to all the patients with complex cardiac anomaly of single ventricle variety and better results can be anticipated with judicious selection of patient and improvement of postoperative care.

• Corrosion Science and Technology
• /
• 제16권3호
• /
• pp.100-108
• /
• 2017

In this investigation corrosion behavior of newly developed high-pressure die cast Al-Ni (N15) and Al-Ni-Ca (NX1503) alloys was studied in 3.5% NaCl solution. The electrochemical corrosion behavior was evaluated using open circuit potential (OCP) measurement, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) techniques. Potentiodynamic polarization results validated that NX1503 alloy exhibited lower corrosion current density ($i_{corr}$) value ($5.969{\mu}A/cm^2$) compared to N15 ($7.387{\mu}A/cm^2$). EIS-Bode plots revealed a higher impedance (${\mid}Z{\mid}$) value and maximum phase angle value for NX1503 than N15 alloy. Equivalent circuit curve fitting analysis revealed that surface layer ($R_1$) and charge transfer resistance ($R_{ct}$) values of NX1503 alloy was higher compared to N15 alloy. Immersion corrosion studies were also conducted for alloys using fishing line specimen arrangement to simultaneously measure corrosion rates from weight loss ($P_W$) and hydrogen volume ($P_H$) after 72 hours and NX1503 alloy had lower corrosion rate compared to N15 alloy. The addition of Ca to N15 alloy significantly reduced the Al3Ni intermetallic phase and further grain refinement may be attributed for reduction in the corrosion rate.

• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1732-1741
• /
• 2020

The structural integrity of welded joints in the reactor pressure vessel (RPV) is directly related to the safety of nuclear power plants. The RPV is made from SA508-III steel in a pressurized water reactor. In this study, we investigated the effects of temperature on the tensile and fracture toughness properties of Chinese SA508-III welded joint in different sampling areas in order to provide reference data for structural integrity assessments of RPVs. The specimens used in tensile and fracture toughness tests were fabricated from the base metal (BM), weld metal (WM), and the heat-affected zone (HAZ) in the welded joint. The representative testing temperatures included the ambient temperature (20 ℃), upper shelf temperature (100 ℃), and service temperature (320 ℃). The results showed that temperature greatly affected the fracture toughness (JIC) values for the SA508-III welded joint. The JIC values for BM and HAZ both decreased remarkably from 20 ℃ to 320 ℃. The fracture morphologies showed that the BM and HAZ in the welded joint exhibited fully ductile fracture at 20 ℃, whereas partial cleavage fracture was mixed in ductile fracture mode at 100 ℃ and 320 ℃. The WM exhibited the ductile and cleavage fracture mixed mode at various temperatures, and the JIC values showed slight changes.

• 한국정보통신학회논문지
• /
• 제6권2호
• /
• pp.315-322
• /
• 2002

반도체 제조공정과 미세가공 기술을 이용하여 30$0^{\circ}C$의 동작온도에서 약 60㎽의 전력소모를 갖는 산화물 반도체 박막 가스센서 어레이를 제조하였다. 멤브레인의 우수한 열적 절연은 0.1$\mu\textrm{m}$ 두께의 Si$_3$N$_4$와 1$\mu\textrm{m}$ 두께의 PSG의 이중 층에 의한 것으로, 각각 LPCVD(저압화학 기상증착)와 APCVD(대기압 화학 기상증착)에 의해 제조되었다. 센서 어레이의 4가지 산화물 반도체 박막 감지물질로는 1wt.%Pd가 도핑된 SnO$_2$, 6wt.% $Al_2$O$_3$가 도핑된 ZnO, WO$_3$, ZnO를 이용하였으며, 제조된 초소형 산화물 반도체 박막 가스센서 어레이는 여러 가지 가스의 노출시 유용한 저항 변화를 나타내었고 감도는 감지 물질에 강하게 의존함을 알 수 있었다. 센서 소자의 공정 수율을 증진시키기 위하여 히터 부위를 함몰하는 공정 방법을 취하였으며, 그 결과 월등한 수율 개선을 도모할 수 있었다.