• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.88-93
• /
• 2017

나로우주센터에 구축/개발된 3단 엔진 연소시험설비에서 다단연소사이클 액체 로켓엔진의 시험을 수행하였다. 수류시험과 점화시험, 연소시험이 이루어졌으며 예연소기의 연소압력 제어를 위한 TTR의 개도를 $143^{\circ}$에서 $185^{\circ}$ 까지 변화시키며 시험을 수행하였다. 시험 결과 엔진의 주요성능과 TTR 개도에 의한 수력학적 변화를 확인하였지만 연소압력의 제어성 확인을 위한 결과는 얻지 못하였다. 향후 본 논문의 연구에서 도출된 개선점을 보완한 예연소기 압력제어 연구가 이루어질 것이다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2578-2580
• /
• 2000

A siumlator had been developed and used for reliability verification on medium size steam turbine control programs prior to its actual operation in field. A mathematical model on thermal dynamics pertaining to prime mover steam turbine and electrical generator was realized and included in this simulator. Also, many operating data acquired from fields was utilized in order to decide mechanical and thermal dynamic characteristics such as friction loss, windage loss and inertia. A user can decide closing or opening velocity of steam stop valve and steam regulation valve. This simulator is able to generate steam pressure, turbine speed, electrical power, and power system frequency.

• Nuclear Engineering and Technology
• /
• 제50권6호
• /
• pp.981-988
• /
• 2018

An experiment was performed for the OECD/NEA ROSA-2 Project with the large-scale test facility (LSTF), which simulated a steam generator tube rupture (SGTR) accident due to a double-ended guillotine break of one of steam generator (SG) U-tubes with operator recovery actions in a pressurized water reactor. The relief valve of broken SG opened three times after the start of intact SG secondary-side depressurization as the recovery action. Multi-dimensional phenomena specific to the SGTR accident appeared such as significant thermal stratification in a cold leg in broken loop especially during the operation of high-pressure injection (HPI) system. The RELAP5/MOD3.3 code overpredicted the broken SG secondary-side pressure after the start of the intact SG secondary-side depressurization, and failed to calculate the cold leg fluid temperature in broken loop. The combination of the number of the ruptured SG tubes and the HPI system operation difference was found to significantly affect the primary and SG secondary-side pressures through sensitivity analyses with the RELAP5 code.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.174-177
• /
• 2007

본 연구에서는 액체로켓엔진의 제어기구로서 많이 사용되는 유압식 레귤레이터에서의 제어 프로세스와 제어 변수의 조절에 관한 정적 및 동적 특성을 연구하였다. 본 연구의 대상으로는 8K14 "SCUD"의 9D21 엔진에 사용되는 유압식 레귤레이터를 선택하였으며, 본 유압식 레귤레이터의 수학적 모델링을 거쳐, 액체로켓엔진 내부에서의 유압식 레귤레이터의 응답속도와 자동제어시스템의 정밀도 분석을 수행함으로써, 유압식 레귤레이터의 유압조절기구인 니들밸브 유로면적의 설계값을 도출하였다.

• 한국자동차공학회논문집
• /
• 제16권3호
• /
• pp.144-150
• /
• 2008

This research aims to develop parts for advanced fuel/oil filtering re-circulation applicable to this kind of regulation proof engines. These parts can playa role of converting traditional air emission type crankcase into recovery type crankcase so that the engine can deal with environmental regulations, which do not allow minimal amount of toxic gas discharge. For the experiment, test method and specially made testing equipment are prepared. The results showed that oil separation efficiency of the cone type CCV(Crank Case Ventilation) system was higher than one of cylinder type both in bench test and in engine.

• 한국자동차공학회논문집
• /
• 제11권6호
• /
• pp.21-29
• /
• 2003

Boosting of engine power by using Turbo- or Super-charger is a solution to comply with $CO_2$-regulation in Europe. Turbo-charger is now playing a major role in the field of charging system thank to its technical advantages such as no demand of operation power from engine. A mechanically driven Super-charger, however, is now popular due to quick speed response to change of the driving mode-high engine torque even at low engine speed. Since Super-charger needs operation power from engine, it is difficult to improve its relatively higher fuel consumption than that of Turbo-charger. This negative point is still an obstacle to the wide use of Super-charger. This study aims to develop power control concept to achieve the minimization of operation power when it is not necessary to charge at idling or part load driving condition. A screw type Super-charger was modified in design partially and adapted an internal bypass valve and a bypass tube to control charging pressure at part load. The various control concepts show a possibility to reduce operation power of Super-charger and result in improvement of fuel consumption.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1091-1096
• /
• 2004

It is necessary to consider the stability, economic environmental-friendly problems by the development of the road, supply of the automobile, environmental problem as designing the exhaust system. To reduce the noise and the vibration of the automobile. The need for stricter regulation limits emission and demand for lower fuel comsumption. According to motor vehicle company develop variable type muffler, dual muffler and active intelligence exhaust system unit. Improvement in engine performance and fuel consumption for demand information of pressure fraction and heat characteristics. To be able to determine these factor for we experiment on each case of exhaust system unit. In this study, in order to establish the optimized conditions design factors which are taking many performance as the variable valve, it shows how the standard performance and the additional element of the exhaust system effects on the engine performance.

• 한국자동차공학회논문집
• /
• 제22권3호
• /
• pp.81-89
• /
• 2014

This study researched on the effect of HP/LP-EGR system to improve fuel consumption of Low Temperature Combustion Engine. Firstly, low temperature combustion engine with HP/LP-EGR system was established using 6.0L wastegate turbocharger HDDI engine. And suppliable EGR rate of the engine was proven to be enough to realize stable low temperature combustion. Then, optimum operating strategy was founded to develop fuel consumption of the engine. Control parameters were HP/LP-EGR valve and IPCV(Intake Pressure Control Valve) duty. Experiments method was that characteristics of the engine were measured and analyzed according to HP/LP-EGR strategies while EGR rate was fixed. Operating range for the strategy were divided into three parts, low load for low temperature combustion, high load for conventional diesel combustion, and transient condition. Finally, with the above strategy of this study, BSFC of the engine was improved about 2% compared to the base engine, and emission level, NOx and PM, met Tier4Final emission regulation.

• 한국추진공학회지
• /
• 제22권4호
• /
• pp.18-23
• /
• 2018

나로우주센터에 구축/개발된 3단 엔진 연소시험설비에서 다단연소사이클 액체 로켓엔진의 시험을 수행하였다. 수류시험과 점화시험, 연소시험이 이루어졌으며 예연소기의 연소압력 제어를 위한 TTR의 개도를 $143^{\circ}$에서 $185^{\circ}$까지 변화시키며 시험을 수행하였다. 시험 결과 엔진의 주요성능과 TTR 개도에 의한 수력학적 변화를 확인하였지만 연소압력의 제어성 확인을 위한 결과는 얻지 못하였다. 향후 본 논문의 연구에서 도출된 개선점을 보완한 예연소기 압력제어 연구가 이루어질 것이다.

• 한국가스학회지
• /
• 제19권3호
• /
• pp.9-17
• /
• 2015

한국에서 소비되는 대부분의 천연가스는 배관을 통한 수송을 위하여 높은 압력으로 압축되고, 수요처에 공급되기 전에 정압기지에서 다시 감압된다. 감압과정에서 간단하고 효율적인 설치를 위해 팽창밸브가 사용되었으나 팽창밸브에서는 압축을 통해 회수되는 에너지가 없다. 따라서 팽창밸브와 동일한 감압 기능을 수행하면서 압력에너지를 축일로 회수하여 전력을 생산할 수 있는 터보팽창기가 팽창밸브의 대안으로 제시되었다. 본 연구에서는 중압 정압기지에서 팽창밸브의 평균 입구, 출구 압력조건인 68.7 bar에서 23 bar로 감압될 때 입구의 온도, 유량조건에 따라서 생산 가능한 전력을 이론적으로 계산하였다. Peng-Robinson 상태방정식을 이용하여 천연가스를 순수한 메탄으로 고려한 경우와 소량의 질소와 탄화수소의 혼합물로 고려한 경우에 대한 열역학적 물성을 계산하였다. 2013년 공급량을 기준으로 터보팽창기 도입을 통해 회수 가능한 이론적인 최대 전력생산량은 순수한 메탄의 경우 1596 MW, 혼합물의 경우 1567 MW로 추산되었다.