• Bulletin of the Korean Chemical Society
• /
• 제27권9호
• /
• pp.1463-1465
• /
• 2006

• 한국콘텐츠학회논문지
• /
• 제15권2호
• /
• pp.187-195
• /
• 2015

본 연구는 세월호 사건 보도를 둘러싸고 청와대 및 KBS 사장의 방송 보도 및 편성 개입 사실이 폭로된 상황에서 방송 자유를 구현하기 위한 지상파 공영방송인 KBS의 보도 및 편성 책임의 주체가 누구인지에 대해 분석하였다. 이를 위해 선행연구, 방송관련서적, 각종 언론 관련 저널(노보 포함) 및 보도 기사, 방송관련 법령(헌법, 방송법 등), 판례, KBS 편성규약 등의 문헌연구를 진행하였다. 방송보도 및 편성 책임의 주체를 KBS법인, KBS사장, 편성책임자로 임명된 자, 제작실무자 등 네 분류로 분석하였다. 편성권 독립 및 언론의 자유에 관한 선행 연구 및 방송법 규정을 분석해 본 결과, 공공재의 성격을 띠는 지상파 방송은 국가와 국민의 진정한 이익을 위해 봉사해야 하며, 이를 실천할 수 있는 자가 방송 편성 및 보도 제작의 주체가 되어야 함을 확인하였다. 결론적으로 방송 자유를 수호할 수 있는 방송보도 및 편성의 주체는 구조적으로 정권의 외압에 취약한 방송사 사장이 아니라 방송을 취재, 제작하는 실무자 및 편성책임자라 할 수 있다. 공영방송사 사장의 역할은 방송편성의 적임자를 방송편성책임자로 선임, 그의 자율 편성을 보장해야 하며, 편성책임자는 편성규약에 의거 취재제작실무진들의 자율적인 방송제작을 보장해 줘야 하는 것으로 확인되었다.

• Structural Engineering and Mechanics
• /
• 제24권2호
• /
• pp.155-180
• /
• 2006

Many applications in mechanical design involve elastic bodies coming into contact under the action of the applied load. The distribution of the contact pressure throughout the contact interface plays an important role in the performance of the contact system. In many applications, it is desirable to minimize the maximum contact pressure or to have an approximately uniform contact pressure distribution. Such requirements can be attained through a proper design of the initial surfaces of the contacting bodies. This problem involves a combination of two disciplines, contact mechanics and shape optimization. Therefore, the objective of the present paper is to develop an integrated procedure capable of evaluating the optimal shape of contacting bodies. The adaptive incremental convex programming method is adopted to solve the contact problem, while the augmented Lagrange multiplier method is used to control the shape optimization procedure. Further, to accommodate the manufacturing requirements, surface parameterization is considered. The proposed procedure is applied to a couple of problems, with different geometry and boundary conditions, to demonstrate the efficiency and versatility of the proposed procedure.

• 동력기계공학회지
• /
• 제21권6호
• /
• pp.56-61
• /
• 2017

The check valves are mechanical valves that permit fluids to flow in only one direction, preventing flow from reversing. It is classified as one way directional valves. There are various types of check valves that used in a marine application. A lift type check valve uses the disc to open and close the passage of fluid. The disc lift up from seat as pressure below the disc increases, while drop in pressure on the inlet side or a build up of pressure on the outlet side causes the valve to close. An important concept in check valves is the cracking pressure which is the minimum upstream pressure at which the valve will operate. On the other hand, optimization is a process of finding the best set of parameters to reach a goal while not violating certain constraints. The AMESim software provides NLPQL(Nonlinear Programming by Quadratic Lagrangian) and genetic algorithm(GA) for optimization. NLPQL is the implementation of a SQP(sequential quadratic programming) algorithm. SQP is a standard method, based on the use of a gradient of objective functions and constraints to solve a non-linear optimization problem. A characteristic of the NLPQL is that it stops as soon as it finds a local minimum. Thus, the simulation results may be highly dependent on the starting point which user give to the algorithm. In this paper, we carried out optimization design of the check valve with NLPQL algorithm.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.1145-1148
• /
• 1999

In this paper we developed the communication protocol in which can transmitter receive a data and instruction in pressure and control computer. This system can dramatically increase production by maximize by control the error in central unit and monitoring. When developed these pressure automatic control system, it can be automation product in factory and decrease man-power.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1023-1028
• /
• 2004

A micro-pressure wave is generated by the high-speed train which enters a tunnel, and it causes explosive noise and vibration at the exit. It is known that train speed, train-tunnel area ratio, nose slenderness and nose shape mainly influence on generating micro-pressure wave. So it is required to minimize it by searching optimal values of such train shape factors and tunnel condition. In this study, response surface model, one of approximation models, is used to perform optimization effectively and analyze sensitivity of design variables. Owen's randomized orthogonal array and D-optimal Design are used to construct response surface model. In order to increase accuracy of model, stepwise regression is selected. Finally SQP(Sequential Quadratic Programming) optimization algorithm is used to minimize the maximum micro-pressure wave by using built approximation model.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.462-466
• /
• 1997

Proportional directional control valves (PDCVl adjust the amount of flow as well as flow direction in response to an electrical signal. This valves includes direct operated valves with or without spool position feedback. This paper investigates if it is possible to control pressure of fluids by means of the PDCV. A pressure signal is feed back to the Proportional-Integral (PI) controller, which is based upon a personal computer (PC). The PI control algorithm is implemented in a graphical programming language of LabVIEW. The results of experiments show the PDCV can be used a multi function valve of pressure control as well as direction control.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.29-33
• /
• 2007

In order to protect the environment from the refrigerant pollution, the $CO_2$ may be regarded as one of the most attractive alternative refrigerants for an automotive air-conditioning system. Control methods for a $CO_2$ system should be different because of $CO_2$'s unique properties as a refrigerant. Especially, the high-side pressure of a $CO_2$ system should be controlled for the effective operation of the system. In this study, the high-side pressure setpoint algorithm was developed by using a neural network and a Lagrange interpolation method. These methods were compared. Simulation results showed that a Lagrange interpolation method was more effective than a neural network in the respect of its easiness of programming and shorter execution time.

• 드라이브 ㆍ 컨트롤
• /
• 제14권4호
• /
• pp.45-50
• /
• 2017

The gas spring is a hydropneumatic adjusting element, consisting of a pressure tube, a piston rod, a piston and a connection fitting. The gas spring is filled with compressed nitrogen within the cylinder. The filling pressure acts on both sides of the piston and because of area difference it produces an extension force. Therefore, a gas spring is similar in function compare to mechanical coil spring. Conversely, optimization is a process of finding the best set of parameters to reach a goal while not violating certain constraints. The AMESim software provides NLPQL (Nonlinear Programming by Quadratic Lagrangian) and GA (genetic algorithm) for optimization. The NLPQL method builds a quadratic approximation to the Lagrange function and linear approximations to all output constraints at each iteration, starting with the identity matrix for the Hessian of the Lagrangian, and gradually updating it using the BFGS method. On each iteration, a quadratic programming problem is solved to find an improved design until the final convergence to the optimum design. In this study, we conducted optimization design of the gas spring reaction force with NLPQL.

• 센서학회지
• /
• 제8권2호
• /
• pp.163-170
• /
• 1999

각각 8개의 N과 P채널 EEPROM을 이용하여 광섬유 엔진 모니터용 압력센서를 위한 A/D 변환기를 설계하였다. EEPROM의 쓰기와 소거동작에서 요구되는 높은 프로그래밍 전압의 크기를 낮추기 위한 지역전계강화 효과가 소개된다. 프로그래밍 모드에서 EEPROM의 선형적 저장능력을 관찰하기 위해 MOSIS의 $1.2\;{\mu}m$ double-poly CMOS 공정을 이용하여 셀이 제작되었다. 그 결과 1.25V와 2V구간에서 10mV 미만의 오차 내에서 셀이 선형적으로 프로그램 되는 것을 보았다. 이러한 실험 결과를 이용하여 프로그램 가능한 A/B 변환기의 동작이 Hspice에서 시뮤레이션 되었으며, 그 결과 A/D 변환기가 $37\;{\mu}W$의 전력을 소모하고 동작주파수는 333MHz 정도인 것으로 관찰되었다.