• Journal of the Korean Geosynthetics Society
• /
• v.16 no.2
• /
• pp.149-158
• /
• 2017

Permeating injection is commonly known as an ideal type of injection in grouting reservoir embankment, yet often-combined permeating and fracturing injection grouting operation can disturb the original soil. A grouting method has been regarded as effective and developed to ameliorate the possible disturbance problem. It involves compaction grouting with low expansive pressure near the injection hole and repetitive injection and compaction with grout material that allows ideal permeating injection. This thesis develops Hybrid Grout (ie. HG grout) that allows various application in any ground condition combined together, has high fineness and low viscosity, and expands permeation injection to silty sand. It researches on the injection effect of permeable compaction grout which is done with PC packer and is a combination of HG grout and expansion agent to obtain permeation compaction effect on the area near grout injection spot by developing Permeable Compaction Type Packer(ie. PC packer). As the developed PC packer, HG grout, and and expansion agent (HI-E) are applied to reservoir embankment reinforcement grouting, possibile permeation compaction effect that satisfies reservoir embankment grouting standard is confirmed according to the research.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.11 no.1
• /
• pp.56-67
• /
• 1999

It is desired to use a domestically manufactured ocean data buoy for the long-term operational ocean monitoring. The ocean data buoy manufacturing technology was introduced through the research cooperation with the Qingkong University of Taiwan. The introduced ocean data buoy system was further expanded and improved for more efficient application for the marine environmental monitoring in Korea. The size of the ocean data buoy is 2.5 m in diameter, which is smaller compared to the NOAA's 3.0 m discus buoy to allow easy land transportation and ocean deployment as well. From the dynamic response test of the buoy carried out numerically, it was shown that the measurement of waves with period greater than 4 seconds is acceptable. The measurement and control system of the data buoy were improved to increase the number of measuring parameters, to reduce power consumption and to enhance better data analysis and management. Each component of the improved data buoy system was described in detail in this paper. Water quality sensors of water temperature, salinity, DO, pH and turbidity were added to the system in addition to the marine meteorological sensors of wind speed and direction, air temperature, humidity, air pressure and wave. Inmarsat satellite communication system is used for the real-time data telemetry from the buoy deployed offshore. A field performance test of the improved and domestically manufactured buoy was carried out for a month at the open sea off Pohang together with DatawelI's Wave-rider buoy to compare the wave data. The results of the test were satisfactory.

• Korean Journal of Community Nutrition
• /
• v.22 no.5
• /
• pp.441-455
• /
• 2017

Objectives: The purpose of this study is to describe beverage patterns among healthy Korean adults and investigate their association with prevalence and components of metabolic syndrome. Methods: Subjects consisted of 6,927 Korean adults, aged 19-64 years in the $6^{th}$ Korea National Health and Nutrition Examination Survey (KNHANES, 2013-2015). Beverages were regrouped into twelve groups based on food codes and beverage intake (g/day) was assessed by 24-hour recall. Factor analysis was used to obtain beverage patterns. Waist circumference and body mass index (BMI) were used as anthropometric data; fasting blood glucose, triglyceride, high density lipoprotein (HDL), and blood pressure were used as biochemical indicators. The odds ratio (OR) for prevalence of metabolic syndrome and components of metabolic syndrome was assessed using logistic regression analysis. Results: Three beverage patterns were identified using factor analysis: 1) carbonated soft drinks 2) coffee (without added sugar or powdered creamer), and 3) alcoholic beverages. Subjects with high scores for the carbonated soft drink and coffee without added sugar or powdered creamer patterns were younger and subjects with high scores for the alcoholic beverage pattern were older. There were significant differences in gender distribution in all three beverage patterns, with men more likely to have high scores for carbonated soft drink and alcoholic beverage patterns. On the other hand, women were more likely to have higher scores for coffee without added sugar or powdered creamer pattern. Within each pattern, there were significant differences in sociodemographic and lifestyle characteristics such as education, household income, frequency of eating out, and smoking status according to the quartile of pattern scores. Alcoholic beverages and carbonated soft drinks patterns were associated with an increased levels of metabolic syndrome components, but coffee without added sugar or powdered creamer was not associated with any of metabolic syndrome components in healthy Korean adults after adjusting for age, sex, education, BMI, weight management, household income, smoking status, frequency of eating out, and energy intake. Conclusions: Alcoholic beverages and carbonated soft drinks patterns are associated with increased levels of metabolic syndrome components while coffee without added sugar or powdered creamer pattern is not associated with any of metabolic syndrome components in healthy Korean adults.

• The Journal of the Korea Contents Association
• /
• v.17 no.9
• /
• pp.203-211
• /
• 2017

The purpose of this study was to determine the association of some adult dental fear and depression, and stress. Among the patients who came to the dental clinic for periodontal treatment, 68 patients who agreed to participate in the study and who met the selection criteria were included. Dental fear, depression symptom questionnaire, salivary cortisol, which can objectively evaluate blood pressure, pulse, and stress. The results of the analysis showed that depressive symptom was related to 'delayed treatment promise', 'cancellation of treatment appointment', 'increased muscle tension', 'rapid breathing when entering dentistry', 'fear when waiting in the waiting room', 'fear when you smell the hospital', 'fear when looking at the dental clinic', 'fear when seeing the anesthetic needle', 'fear when tooth whistle was heard', 'fear when teeth were removed', and 'total fear of dentistry'(p<0.05). Stress symptoms were higher in 'having sweated in the dentist', 'faster pulse', 'fear of entering the dentist' and 'total fear of the dentist'(p<0.05). Based on these results, it is necessary to study the effective methods to control the depressive symptoms and stress of patients who visit dental clinics, and it seems that continuous management is needed to prepare methods such as relaxation therapy for dental fear patients.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.21 no.2
• /
• pp.28-36
• /
• 1979

One of most important problems in the Monsoon Asia today is the production of rice paddy to meet the needs of the ever increasing population. Diversemeans are being employed to meet this demand, both by increasing productivity of existing farm land and by bringing further areas into cultivation. The primary step in either field is to ensure that there is sufficient moisture in the soil to suit the paddy, and at the same this means that excess moisture has to be drained off the land, while in others irrigat ion has to be employed to bring sufficient water to an area. In view of the fact that the project comprises a huge amount of earthwork, it can be carried out by extensive use of construction machinery in order to shorten the period. As farm ditch has a comparatively small section with shallow cutting depth, inaddition, there is lack of access road in the field, the excavation equipment with bulldozer or tracter-shovel (backhoe) type are not applicable because there are mostly adapted for the excavation of deep and wide section. Mini-backhoe with its bucket width not larger than 0. 3m, and width of blade not larger than 1. 00m seems to be more adaptable. About 80% of excavation of ditch section will be done by the machinery while the other 20% of excavation together with the finishing of the section are supposed to be done by man-power. The embankment of ditch section can be compacted by the crawler of backhoe when it is moving along the ditch for excavation. However, Lowland paddy field in the Monsoon Asia are made particulary in rain season, therefore, heavy machinery is not easy excavation for ditch. It is very important to know exact ground support power of the working site and select machines with corresponding ground pressure. Ground support power is variable subject to quality and water content of soil and therefore selection of machines should be made duly considering ground condition of the site at the time of construction works. Farm ditches dug and compacted by mannual labar are of poor quality and subject to destruction after one or two years of operation. On the other hand, excavation and compaction by bulldozer is not practical for ditches. Backboe is suitable for slope land, but this is required cycle time of bucket excavation and dumped out. If a small-scale farm ditch trencher adaptable to lowland paddy field is invented, such a machine could greatly accelerate the massive construction work envisaged in many countries and thus significantly speed up the most difficult part of irrigation development and management in Monsoon Asia.

• Journal of the Korean Institute of Gas
• /
• v.24 no.4
• /
• pp.84-92
• /
• 2020

Most facilities in chemical plants operate in environments that are outside the range of temperature and pressure that can be encountered on a daily basis, and are vulnerable to aging due to these stresses and environmental conditions. The facilities exposed to these conditions are not only likely to fail due to cumulative damage, but also lead to accidents if maintenance and replacement are not performed.Recommendation guidelines called risk-based inspection are widely used around the world-wide. However, limits exist for facilities that have already elapsed for a certain. As a result of the survey on the aging of Ulsan industrial complex in Korea, which carries out proper inspection, many of the facilities have been used for 20 years. Also, most of the facilities where the accident occurred have been in operation for more than 20 years. Therefore, this study suggested criteria for classifying devices that have exceeded a certain period of use as obsolete facilities. In addition, quantitative risk assessment was conducted. The safety investment method using the cost-benefit analysis method was proposed in order to calculate the loss cost and reduce the risk by expressing the risks of the corresponding aged facility as an Economic index. By utilizing the method of cost-benefit analysis of old facilities using the quantitative risk assessment presented in this study, it can be expected to improve the performance and life of old facilities, improve production efficiency and reliability of the system of facilities, change the recognition of safety management costs, increase employee stability, and reduce loss costs.

• Archives of Plastic Surgery
• /
• v.36 no.5
• /
• pp.559-564
• /
• 2009

Purpose: Surgical reconstruction of an ischial soft tissue defect presents a challenging problem owing to a high rate of recurrence, especially paraplegic patients. Although various muscle, musculocutaneous and fasciocuta - neous flaps have been used in the reconstruction of ischial soft tissue defect, it is still debated which type of flaps are the best. We had performed a relatively durable adductor magnus perforator island flap based on the perforators originated from the first medial branch of the profunda femoris artery for coverage of ischial soft tissue defect where was not a region universally reconstructed by perforator flap. Methods: From August 2005 until January 2008, the adductor magnus perforator island flap had been used for resurfacing of the ischial soft tissue defects in a series of 6 patients (4 male and 2 female). Ages ranged from 26 to 67 years (mean, 47.5 years), and follow - up period from 13 to 26 months (mean, 16.7 months). Causes were 4 pressure ulcers, 1 cellulitis and 1 suppurative keratinous cyst. Results: The sizes of these flaps ranged from 12 to 18 cm in length and 7 to 9 cm in width. The flaps survived in all patients. Marginal loss over the distal area of the flap by infection was noted in one patient, which was treated successfully with a subsequent split - thickness skin graft. Average thickness of the flap was 0.94 cm, which was more thicker than other perforator flaps. Long term follow - up showed a good flap durability. Conclusion: In planning a reconstructive option of ischial soft tissue defect, the adductor magnus perforator island flap is a relatively large cutaneous flap with a durable thickness. With proper patient selection, careful vascular dissection and postoperative management, we recommend this flap is a good and suitable option for coverage of the ischial soft tissue defect.

• Journal of Korean Society of Transportation
• /
• v.30 no.6
• /
• pp.27-36
• /
• 2012

In Korea, 28,641 cases of traffic accidents were caused by drunk driving in 2010. These statistics accounted for 12.62% of total number of traffic accidents. Moreover, the percentages of deaths and injuries from them were nearly 15% of those from whole traffic accidents. While police has emphasized enforcement efforts in order to reduce drunk driving, culture generous to drunk driving in addition to the absence of an appropriate intervention system for habitual drunk drivers have contributed to the increasing number of the drunk driving accidents in Korea. This study examined specific behavioral changes in drunk driving by comparing drivers' behavior pattern in non-alcoholic condition to those in alcoholic condition, using a psychomotor test and a driving simulator. In the psychomotor test measuring participants' reactions to the target stimulus, it was revealed that participants' correct responses were decreased, false responses were increased, and no responses also were increased after drinking. Furthermore, in the driving simulator performance after drinking, not only driving speed was faster but also the deviation of an accelerator pedal pressure and of the vehicle's lateral position were much increased. These results indicated that alcohol consumption would impair visio-cognitive ability and deteriorate driving safety. Finally, the implications and limitations of our findings and suggestions for the future research were discussed.

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.3 s.27
• /
• pp.355-367
• /
• 1989

This study examined the physical and mental health factors affecting the industrial accidents of 142 injured and 1,212 uninjured workers in the shipbuilding industry from 1986 to 1988. The results acquired from the Todai Health Index (THI) and from analysis of the health examination were as follows: 1. Among the personal characteristics of the workers, the educational level of injured workers was significantly lower than that of the uninjured workers. 2. Among the physical characteristics, vision and $R\ddot{o}hrer$ Index of the injured workers were lower than those of the uninjured workers, and the difference was statistically significant. On the other hand, the differences in height, weight, hearing function, hematocrit, blood pressure, urine test, and X-ray findings were not statistically significant between the injured and uninjured workers. 3. The score of the THI questionnaire on the physical and mental health of the injured workers was higher than that of the uninjured workers, and the difference was statistically significant. 4. Form the THI score, the industrial workers had complained more about mental health than physical health and there was a statistically singinficant relation with the industrial accidents. 5. The relative risk expressed in terms of the odds ratio was 2.9 for poorer vision, 2.7 for a lower educational level, 2.2 for a higher THI score and 1.6 for overdrinking. 6 Educational level, vision, and the THI score were selected as significant factors influencing industrial accidents based on a log-linear model. According to the results of this model by logistic analysis, the odds ratio of industrial accidents was 1.8 for a lower educational level, 1.7 for poorer vision, and 1.6 for a higher THI score. 7 By event history analysis with the dependent variable as the duration of work at the time of the industrial accident, educational level, age, $R\ddot{o}hrer$ Index and THI score were the statistically significant variables selected, and the hazard rate of industrial accident occurrence was 0.24 for a lower educational level, 0.92 for age, 0.99 for a lower $R\ddot{o}hrer$ Index and 2.72 for a higher THI score. As we have seen, educational level and THI score were the most significant factors affecting the hazard rate of industrial accidents. Vision, $R\ddot{o}hrer$ Index, age, and drinking behavior were also statistically significant variables influencing industrial accidents. Therefore, in order to prevent industrial accidents, it is necessary to establish a health management plan for industry which can objectively evaluate not only the physical but also the mental health of the workers. If we use this type of study as a prospective study design, we can determine the relative risk of physical and mental health factors on industrial accidents. Furthermore, it is expected that this type of study will provide workers at high risk with more precise basic data for a health managment plan for industrial accident prevention.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.38 no.11
• /
• pp.915-924
• /
• 2014

In an aero gas-turbine engine, a surface air-oil heat exchanger (SAOHE) is used to cool the oil system for the gearboxes and electric generators. The SAOHE is installed inside the fan casing of the engine in order to dissipate the heat from the oil system into the bypass duct stream. The purpose of this study was to develop an effective numerical method for designing an SAOHE for an aero gas-turbine engine. A two-dimensional model using a porous medium was developed to evaluate the aero-thermal performance of the fins of the heat exchanger, and a one-dimensional flow and thermal network program was developed to save time and cost in the evaluation of the heat exchanger performance. Using this network program, the pressure drop and heat transfer performance of the heat exchanger were predicted, and the results were compared with two-dimensional computational fluid dynamics results and experiment data for validation.