• International Journal of Air-Conditioning and Refrigeration
• /
• v.13 no.1
• /
• pp.11-21
• /
• 2005

The present paper investigates the heat transfer characteristics in a cylinder packed with porous medium of solid spheres for various parameters such as mass flow rate, sphere diameter, length of the porous medium, and gas temperatures. Pressures and temperatures at the inlet and outlet regions were measured by using static pressure gages and R-type thermocouples. The modified relationship based on the Ergun equation is suggested for the estimation of pressure drops. In addition, the useful empirical correlation for thermal efficiency is obtained in the current study. Thermal efficiency is expressed in terms of non-dimensional time, sphere diameter, porosity, and pressure drops. It is also found that the pressure drop through the cylinder becomes larger as the gas temperature does higher at the inlet region, whereas it substantially decreases when the inlet flow rate decreases.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.10a
• /
• pp.443-450
• /
• 2002

It is known that the distribution of the active earth pressure against a translating rigid wall is not triangular, but nonlinear, due to arching effects in the backfill. In the present paper, a new formulation for calculating the active earth pressure on a rigid retaining wall undergoing horizontal translation is proposed. It takes into account the arching effects that occur in the backfill. In order to check the accuracy of the proposed formulation, the predictions from the equation are compared with both existing full-scale test results and values from existing equations. The comparisons between calculated and measured values show that the proposed equations satisfactorily predict both the earth pressure distribution and the total active earth force on the translating wall.

• Proceedings of the KSME Conference
• /
• 2004.04a
• /
• pp.503-507
• /
• 2004

The radiated sound pressure induced by low-velocity impact is obtained by solving the Rayleigh integral equation. This paper established the sound analysis procedure using impact analysis model. For structurally radiated noise, the sound field is directly coupled to the structural motion. Therefore the impact response should be analyzed. The impact response is computed using the spring-mass model. And the influence of damage on the sound pressure and impacted force history of laminated were investigated. The results show that both radiated sound pressure and impact force history are strongly influenced by damage on laminated.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.3
• /
• pp.40-49
• /
• 1994

This paper describes the method to investigate combustion pressure in the cylinder without modifications of engine. Assuming engine dynamics as a single degree of freedom cylinder pressure is estimated using the variation of crank shaft speed. For this study pressure, crank shaft sped, and load are sampled by the crank angle. This study suggests the variation of crank shaft speed can be used as parameters of feedback engine control.

• Wind and Structures
• /
• v.31 no.6
• /
• pp.549-560
• /
• 2020

Methods for stochastic simulation of non-Gaussian wind pressure have increasingly addressed the efficiency and accuracy contents to offer an accurate description of the extreme value estimation of the long-span and high-rise structures. This paper presents a linear prediction and z-transform (LPZ) based Cumulative distribution function (CDF) mapping algorithm for the simulation of multivariate non-Gaussian fluctuating wind pressure. The new algorithm generates realizations of non-Gaussian with prescribed marginal probability distribution function (PDF) and prescribed spectral density function (PSD). The inverse linear prediction and z-transform function (ILPZ) is deduced. LPZ is improved and applied to non-Gaussian wind pressure simulation for the first time. The new algorithm is demonstrated to be efficient, flexible, and more accurate in comparison with the FFT-based method and Hermite polynomial model method in two examples for transverse softening and longitudinal hardening non-Gaussian wind pressures.

• The Journal of Korea Robotics Society
• /
• v.18 no.1
• /
• pp.53-58
• /
• 2023

In general, in order to operate an autonomous underwater vehicle (AUV) in an underwater environment, a navigation system such as a Doppler Log (DVL) using a Doppler phenomenon of ultrasonic waves is used for speed and direction estimation. However, most of the ultrasonic sensors in underwater is large for long-distance sensing and the cost is very high. In this study, not only canal neuromast on the fish's lateral lines but also superficial neuromast are studied on the simulation to obtain pressure values for each pressure sensor, and the obtained pressure data is supervised using spherical CNN. To this end, through supervised learning using pressure data obtained from a pressure sensor attached to an underwater vehicle, we can estimate the speed and angle of the underwater vehicle in a quasi-static underwater environment and propose a method for a non-ultrasonic based navigation system.

• Journal of the Korean Society of Safety
• /
• v.22 no.5
• /
• pp.65-70
• /
• 2007

This paper is estimation of structure damage caused by VCE(Vapor Cloud Explosion) in enclosure. As we estimate the influence of damage which occur at gas facility in factory. We can utilize the elementary data of safety distance. In this study, the influence of over-pressure caused by VCE in enclosure was calculated by using the Hopkinson's scaling law and the accident damage was estimated by applying the influence on the adjacent structure into the probit model. As a result of the damage estimation conducted by using the probit model, both the damage possibility of explosion overpressure to structures of 20 meters away and to glass bursting of 80 meters away was nearly zero in open space explosion.

• Bulletin of the Society of Naval Architects of Korea
• /
• v.3 no.1
• /
• pp.25-32
• /
• 1966

For preliminary estimation of ships' machinery weights, many papers giving well-judged data and discussions for rational method of estimation, such as [1], [2], [3], [4], [5], [6], are available, however, they are mostly concerned with large ships propelled by power more than about 2, 000 horsepower. Regarding the medium and small-sized ships, as far as the author is aware, fragmental data and vague discussions found in various technical literature are the all available. In this paper, available data concerned with machinery weights of commercial ships propelled by direct-drive diesel plants of power below 3, 000 horsepower with single screw propeller are collected and analysed to obtain systematic data Fig. 1 and Fig. 2 as weight to power ratio versus power per shaft diagrams together with suplementary data Fig. 1 and Fig. 3. Influences of various factor such as revolutions per minute, mean effective pressure, type and construction of the main units on machinery weights are also investigated in detail to give a better guidance for logical and rational utlization of the proposed diagrams in preliminary estimation of machinery weights.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1762-1766
• /
• 2000

Estimation of reverberant time is one of important factor for the calculation of absorption ration of absorption material. In general the digital filter bank has been used for the, estimation of decay curve of the sound pressure in a reverberant room. However at low frequency, it is not easy to get a good linear decay curve for the estimation of reverberant time. Now, wavelet transform is applied to this difficult task, a good result has been obtained at low frequency. The decay curve using wavelet filter bank is better than that using digital filter bank at low frequency. At higher frequency, both curves are similar.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2004.03b
• /
• pp.391-398
• /
• 2004

The propagation mechanism of a detonation pressure with fully coupled charge is clarified and the blasting pressure propagated in rock mass is derived from the application of shock wave theory. Probabilistic distribution is obtained by using explosion tests on emulsion and rock property tests on granite in Seoul and then the probabilistic distribution of the blasting pressure is derived from their properties. The probabilistic distributions of explosive properties and rock properties show a normal distribution so that the blasting pressure propagated in rock can be also regarded as a normal distribution. Parametric analysis was performed to pinpoint the most influential parameter that affects the blasting pressure and it was found that the detonation velocity is the most sensitive parameter. Moreover, uncertainty analysis was performed to figure out the effect of each parameter uncertainty on the uncertainty of blasting pressure. Its result showed that uncertainty of natural rock properties constitutes the main portion of blasting pressure uncertainty rather than that of explosive properties.