Heat Transfer Characteristics in a Cylindrical Duct Packed with Solid Spheres

  • Published : 2005.03.01

Abstract

The present paper investigates the heat transfer characteristics in a cylinder packed with porous medium of solid spheres for various parameters such as mass flow rate, sphere diameter, length of the porous medium, and gas temperatures. Pressures and temperatures at the inlet and outlet regions were measured by using static pressure gages and R-type thermocouples. The modified relationship based on the Ergun equation is suggested for the estimation of pressure drops. In addition, the useful empirical correlation for thermal efficiency is obtained in the current study. Thermal efficiency is expressed in terms of non-dimensional time, sphere diameter, porosity, and pressure drops. It is also found that the pressure drop through the cylinder becomes larger as the gas temperature does higher at the inlet region, whereas it substantially decreases when the inlet flow rate decreases.

Keywords

References

  1. Willmott, A.J., 1993, The development of thermal regenerator theory from 1931 to the present, Journal of the Institute of Energy, Vol. 66, pp. 54-70
  2. Akter, S. and Hossain, I., 1997, Waste heat utilization in a ceramic industry, International Journal of Energy Research, Vol. 21, pp. 1215-1221 https://doi.org/10.1002/(SICI)1099-114X(19971025)21:13<1215::AID-ER315>3.0.CO;2-N
  3. Kluka, J. A. and Wilson, D. G., 1998, Lowleakage modular regenerators for gas-turbine engines, Journal of Engineering for Gas Turbines and Power, Vol. 120, pp. 358-362 https://doi.org/10.1115/1.2818130
  4. Suzukawa, Y, Sugiyama, S., Hino, Y, Ishioka, M. and Mori, I., 1997, Heat transfer improvement and NOx reduction by highly preheated air combustion, Energy Convers. Mgmt., Vol. 38, pp. 1061-1071 https://doi.org/10.1016/S0196-8904(96)00136-7
  5. Noh, D. S., Hong, S. K., Ryou, H. S. and Lee, S. H., 2001, Experiment and numerical simulation for heat transfer in a regenerator system with ceramic honeycomb, The Korean Society of Mechanical Engineers (KSME) International Journal, Vol. 15, No.3, pp. 357-365
  6. Varahasamy, M. and Fand, R. M, 1996, Heat transfer by forced convection in pipes packed with porous media whose matrices are composed of sphere, International Journal of Heat Mass Transfer, Vol. 39, pp. 3931-3947 https://doi.org/10.1016/0017-9310(96)00032-4
  7. Atamanov, V. V., Kharitonov, V. V. and Yakutin, N. V., 1996, Correlation between heat transfer and dissipation of flow energy in packed spheres, High Temperature, Vol. 34, No.4, pp. 585-591
  8. Kimura, S. 1989, Transient forced and natural convection heat transfer about a vertical cylinder in a porous medium, International Journal of Heat Mass Transfer, Vol. 32, No.3, pp. 617-620 https://doi.org/10.1016/0017-9310(89)90150-6
  9. Kaviany, M., 1995, Principles of heat transfer in porous media, 2nd ed., Springer-Verlag New York, Inc
  10. Fand, R. M. and Thinakaran, R., 1990, The influence of the wall on flow through pipes packed with spheres, ASME, Journal of Fluids Engineering, Vol. 112, pp. 84-88 https://doi.org/10.1115/1.2909373