• Journal of Advanced Marine Engineering and Technology
• /
• 제18권2호
• /
• pp.25-32
• /
• 1994

The characteristics of the R-22 two-stage compression refrigeration systems were investigated. The apparatus consisted of 0.5HP and 1HP hermetic reciprocating compressors for the high and low stage sides respectively, a condenser, an evaporator, a heat exchanger, four expansion valves, and two intercoolers. The experiments covered a range of refrigerant flow rates from 24 to 84kg/h, and the inlet temperature of cooling water in the condenser and heat source water in the evaporator ranged from 20 to 30$^.\circ}C$The results Showed that the refrigerant flow rate had greater effect on the refrigerating capacities, the compression efficiency and the coefficient of performance of two-stage compression systems than the inlet temperature of heat source water. And all these values were decreased with increasing inlet temperatures of the cooling water. The pressure drops in the evaporator of two-stage compression systems were decreased in proportion to the increase in the inlet temperature of the heat source and cooling water, but it was increased by the refrigerant flow rate.

• 대한기계학회논문집B
• /
• 제20권12호
• /
• pp.4053-4061
• /
• 1996

Internal flow characteristics within Y-jet atomizers and the local drop size distribution and cross-sectional averaged drop size at the outside were investigated with the liquid and air injection pressures, mixing port length of atomizers, and the liquid properties taken as parameters. To examine the effect of the liquid viscosity, glycerin-water mixtures were used in this study. The liquid viscosity plays only a minor role in determining the internal flow pattern and the spatial distribution shape of drops, but the drop sizes themselves generally increase with increasing of the liquid viscosity. An empirical correlation for the liquid discharge coefficient at the liquid port was deduced from the experimental results; the liquid discharge coefficient strongly depends on the liquid flow area at the mixing point which is proportional to the local volumetric quality(.betha.$_{Y}$), and the volumetric quality was included in the correlation. Regardless of the value of the liquid viscosity, the compressible flow through the gas port was well represented by the polytropic expansion process(k=1.2), and the mixing point pressure could be simply correlated to the aspect ratio( $l_{m}$/ $d_{m}$) of the mixing port and the air/liquid mass flow rate ratio( $W_{g}$/ $W_{f}$) as reported in the previous study.udy.udy.y.

• 대한기계학회논문집B
• /
• 제28권12호
• /
• pp.1521-1527
• /
• 2004

Thermocapillary migration of a liquid slug is caused by temperature difference between the ends of a slug. The temperature difference induces the difference of the surface tension coefficient and consequently of capillary pressure between the ends of the slug. Presently available model to predict a velocity of thermocapillary migration adopts the Poiseuille equation which is valid only for a very long slug and neglects the shear stress near the contact line. In the present study, a new model has been developed to consider the shear stress near the contact line so that it can be applied to slugs or drops of general configuration. The experiments using mineral oil with the length to diameter ratio being 10 and a glass capillary were performed. It was found that the liquid slug began to move upon overcoming contact angle hysteresis when the temperature difference reached 35$^{\circ}C$. The results indicate that the new model well predicts the velocity of the liquid slug.

• 한국기계가공학회지
• /
• 제16권4호
• /
• pp.147-152
• /
• 2017

In the present study, we used a loop thermosyphon heat exchanger consisting of condensers with internal fins and external plate fins which are 480 mm wide, 68 mm long, and 1,000 mm high. The heat transfer pipes in the heat exchanger were 15 mm in diameter and 1,000 mm in length, and 98 heat transfer pipes were installed in the heat exchanger. According to the experimental results, as the spaces between the internal discontinuous pins decreased, the frequency of pressure drops increased and changes in temperature at the outlet of the condenser were shown to be a little smaller. Therefore, we can see that as the spaces between internal discontinuous pins decreased, the heat transfer performance increased. For the loop heat pipe heat exchanger consisting of a condenser with internal and plate fins, as the temperature of the air flowing into the condenser increased, the condensation heat transfer rate also increased, and as the condenser refrigerant inflow temperature increased, the condensation heat transfer rate increased as well.

• 한국표면공학회지
• /
• 제29권6호
• /
• pp.781-787
• /
• 1996

Silicom oxide films with good water repellency were prepared by rf plasma-enhanced CVD (rf-PECVD) using four kinds of organosilicon compound, which had different number of methyl ($CH_3$) groups, and oxygen as gas sources. The differences in the deposition rates, film composition and film properties were studied in detail. Water repellency depended on the number of $CH_3$ groups in the organosilicon compounds and the partial pressure of oxygen in the plasma. The highest contact angle for water drops, about 95 degrees, was obtained when trimethy lmethoxy silane (TMMOS) was used. The contact angle decreased with the amount of oxygen gas introduced into the plasma. The dissociation of $CH_3$ groups by adding oxygen was comfirmed by Fourier transform infrared spectroscopy(FTIR) and X-ray photoelectron spectroscopy (XPS). The optical properties were estimated by double-beam spectroscopy and ellipsometry. The transmittance of the glass plate coated by the film prepared with tetramethoxy silane (TMOS) was about 90% and the refractive index of film was 1.44. This value was smaller than the refractive index of a glass plate(soda lime glass, refractive index is 1.515) and this film played a role of anti-refractive coating.

• 한국추진공학회지
• /
• 제12권3호
• /
• pp.16-23
• /
• 2008

30 톤급 실물형 연소기의 산화제 매니폴드에서의 유동 균일성 문제를 파악하기 위하여 유동해석을 수행하였다. 분사기의 모사를 위하여 다공성 매질로 가정하고, 다공성도 (porosity)를 조절하여 분사기 차압을 모사하였다. 수직 및 수평 분리막에서의 구멍의 직경, 입구 포트의 형상에 따른 유동의 균일성 정도를 파악하고, 개선된 설계 수정안을 제시하였다. 수직 및 수평 분리막 구명의 형태와 배치 수정을 통하여 유량 균일성을 향상시킬 수 있음을 확인하였다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.380-384
• /
• 1997

This study was performed to understand the exogenous-water-drop induced thermomechanical effect on the tooth in the free-running Er:YAG laser mode for the proper use of water as a laser energy absorber and coolant in dentistry. The ree-running Er:YAG laser was used in the dental hard tissue ablation study. A Microjet system was employed to dispense precise water drops. Ablation rate, recoil momentum, and temperature rise in the pulp cavity were measured with and without an exogenous water drop on the tooth surface. Exogenous water enhanced ablation rate in the thick tooth in which the ablation rate on the dry surface does not increase linearly but shows plateau. Optimal exogenous water volume was shifted from 2 nl to 4 nl as the laser energy was increased from 48 mJ to 145 mJ. The magnitude of the recoil momentum was increased as the volume of exogenous water increased. The results of this study suggest that we must pay attention to the recoil momentum or recoil pressure study or the optimal and safe usage of water in the dental treatment because these mechanical effects depend on the volume of exogenous water on the tooth surface.

• 한국산학기술학회논문지
• /
• 제16권4호
• /
• pp.2891-2898
• /
• 2015

전자기장 효과를 이용한 준설토 장거리 이송기술이 개발되었다. 개발 기술의 효과를 정량적으로 평가하기 위해 계측 시스템을 이용하여 측정한 유속분포와 압력강하를 중심으로 전자기장 도입으로 인한 효과를 판단하였다. 대체 물질에 의한 실내실험과 실제 준설현장에서 장거리 이송기술을 적용해본 결과, 펌프만 사용하여 이송하는 경우보다 평균유속은 물론, 특별히 마찰층에서 속도증가가 있는 것을 확인하였다. 준설토 이송시, 이송관에 전자기장을 인가시켜줌으로써, 마찰층에서의 이송 저항을 감소시켜 전체적으로 속도를 증가시킴으로 인해 파이프에 의한 장거리 이송시 관내 압력강하를 줄이고, 유속을 증가시켜서 15km이상의 장거리 이송이 가능할 것으로 판단된다.

• 천문학회지
• /
• 제5권1호
• /
• pp.7-14
• /
• 1972

We have investigated the structure of the general relativistic polytrope(G.R.P.) of n=5. The numerical solutions of the general relativistic Lane-Emden functions ${\upsilon}\;and\;{\theta}$ for the ratio of the central pressure to the central density ${\sigma}=0.1$, 0.3, 0.5 and 0.8333 are plotted graphically. We may summarize the results as follows: 1. As the invariant radius $\bar{\xi}$ increases, the numerical value of the mass parameter ${\upsilon}$ does not approach toward the assymptotic limit, as it does in the classical case $({\upsilon}{\sim}{\sqrt{3}})$, but it increases continuously with progressively smaller rate as compared with the classical case. 2. When $\bar{\xi}$ is less than ${\sim}5.5$, the value of the density function ${\theta}$ drops more rapidly than the classical one, whereas when $\bar{\xi}$ is greater than ${\sim}5.5$, ${\theta}$ becomes greater than the classical value. For the greater values of ${\sigma}$ these phenomena become significant. 3. From the above results it is expected that the equilibrium mass of the G.R.P. of n=5 must be larger than the classical masse $({\sqrt{3}})$ and the mass is more dispersed than the classical configuration (i.e. equilibrium with infinite radius).

• 설비공학논문집
• /
• 제26권5호
• /
• pp.218-223
• /
• 2014

Korea District heating corp. recently give an attention to combine the district heating and supply pipes as a two pipe system that are in the present system separated with room heating and warm water supply pipe, and the two pipe system is commonly applied for heating service in European countries. In the new two pipe system, only one heat source is supplied to a house and partitioned into room heating and warm water supply by household substation. So the effective distribution of supplied heat source in accordance to user intention is very important. This paper presents the development and performance test of three-way proportional control valve for a combined heat source system in district heating. The proposed valve is controlled to partition heat source into two different directions : hot water distributor for space heating and household substation for warm water supply in response to the pressure drops of tap water caused by the user. The performance investigation is shown within 3% of error compared to the theoretical model of the three-way proportional valve and its controllability is verified.