• 한국환경보건학회지
• /
• 제35권6호
• /
• pp.532-537
• /
• 2009

The tropospheric ozone production mechanism for the gas phase additive oxidation reaction of hydroxyl radical (OH) with isoprene (2-methyl-1,3-butadiene) has been studied using cavity ring-down spectroscopy (CRDS) at total pressure of 50 Torr and 298 K. The applicability of CRDS was confirmed by monitoring the shorter (~4%) ringdown time in the presence of hydroxyl radical than the ring-down time without the photolysis of hydrogen peroxide. The reaction rate constant, $(9.8{\pm}0.1){\times}10^{-11}molecule^{-1}cm^3s^{-1}$, for the addition of OH to isoprene is in good agreement with previous studies. In the presence of $O_2$ and NO, hydroxyl radical cycling has been monitored and the simulation using the recommended elementary reaction rate constants as the basis to OH cycling curve gives reasonable fit to the data.

• Nuclear Engineering and Technology
• /
• 제36권6호
• /
• pp.497-511
• /
• 2004

A PSV (pressurizer safety valve) popping test carried out in the early phases of a refueling outage may trigger a test-induced LOCA(loss of coolant accident) if a PSV fails to fully close and is stuck in a partially open position. According to a KSNP (Korea standard nuclear power plant) low power and shutdown PSA (probabilistic safety assessment), the failure of a high pressure safety injection (HPSI) accompanied by the failure of a PSV to fully close was identified as a dominant accident sequence with a significant impact on low power and shutdown risks (LPSR). In this study, we aim to investigate and verify a new means for mitigating this type of accident using a thermal-hydraulic analysis. In particular, we explore the applicability of an aggressive cool-down combined with operator actions. The results of the various sensitivity studies performed there will help reduce LPSR and improve Refueling outage safety.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.180-180
• /
• 2021

Recently, structural damage and defect has occurred in the H-beam backfill installation part of Top-Down construction method. In order to secure structural safety and usability in the adjacent section of the backfilling method, It turns out that it is necessary to analyze by dividing into various cases. The H-beam backfill installation section is divided into the case of adding a vertical plate inside the slab, adding a shear stud, adding a reinforcing bar, changing the thickness of the pressure plate, and filling the H-beam backfill with mortar. Ansys modeling was performed and an appropriate solution was suggested by analysis.

• 한국안전학회지
• /
• 제27권4호
• /
• pp.1-6
• /
• 2012

Recently the government declared an all-out war on bogus fuel in order to crack down on tax evasion and ensure fuel safety. The move came after four people were killed in explosion at the two gas station. Illegally processed gasoline is the only one of low grade fuels. The problems are induced by relatively high vapor pressure of bogus fuel.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.228-233
• /
• 2005

The damage of the pressure courage by degradation can become the reason of unexpected break down or failure accident and it is very important because safety accident, the production loss, environmental pollution, social problems are occur. Consequently The result to investigat of failure accident for domestic pressure vessel, the factor of degradation is SCC, Sorrosion, Cavity, Crack.

• 한국유체기계학회 논문집
• /
• 제10권5호
• /
• pp.20-26
• /
• 2007

Some gate valves are susceptible to pressure locking and thermal binding which prevent the safety function. The safety related gate valves susceptible to pressure locking and thermal binding shall be identified and taken preventive actions to ensure the safety function. The identification of the gate valves susceptible to pressure locking and thermal binding needs the evaluation of system design, valve and piping arrangement, test requirements, and operating conditions. Application of preventive methods should consider the system safety function, applicability, effectiveness, interface with system design, and cost. The selection procedure of valves susceptible to pressure locking and thermal binding can be effectively used in industry including nuclear power plants. In order to prevent the pressure locking, the hole can be drilled through the one disc of upstream side or down stream and the external equalizing line can be installed from bonnet to downstream or upstream. The double disc parallel seat valve type can be used instead of flexible wedge gate valve to prevent the thermal binding. The identification of gate valves susceptible to pressure locking and thermal binding, and preventive actions will meet the regulatory requirements and enhance the availability and safety of plants.

• 설비공학논문집
• /
• 제13권10호
• /
• pp.930-938
• /
• 2001

In this study, evaporation pressure drop experiments were conducted with two types of plate and shell heat exchangers (P&SHE) using R-22. An experimental refrigerant loop has been established to measure the evaporation pressure drop of R-22 in a vertical P&SHE. The flow channels were formed by adding three plates having a corrugated channel of a chevron angle of $45^{\circ}$. The R-22 flows down in one channel exchanging heat with the hot water flowing up in the other channel. The effect of the refrigerant mass flux, average heat flux, system pressure and vapor quality were explored in detail. During the experiment, the quality change between the inlet and outlet of the refrigerant channel ranges from 0.03 to 0.15. The present data showed that two types of P&SHE have similar trends. The pressure drop increases with the vapor quality for both types of P&SHE. At a higher mass flux, the pressure drop is higher for the entire range of the vapor quality. Also, the increase in the average heat flux increases the pressure drop. Finally, at a higher system pressure, the pressure drop is found to be slightly lower.

• Nuclear Engineering and Technology
• /
• 제52권11호
• /
• pp.2491-2498
• /
• 2020

The paper concentrates on an experimental study of the pressure drop in double-layered packed beds formed by glass spheres, having the configuration of horizontal and vertical stratification. Both single-phase and two-phase flow tests are performed. The pressure drop during the test is recorded and the measured data are compared with those of homogeneous beds consisting of mono-size particles. The results show that for the horizontally stratified bed with fine particles atop coarse particles, the pressure drop in top layer is found higher than those of homogenous bed consisting of the same smaller size particles, while the measured pressure drop of bottom part is similar with those of similar homogenous bed. But for the homologous bed with upside-down structure, the stratification has little or no effect on the pressure drop of the horizontally stratified bed, and the pressure drop of each layer is almost same as that of homogeneous bed packed with corresponding spheres. Additionally, in vertically stratified bed, the pressure drops on the left and right side is almost equal and between those in homogeneous beds. It is speculated that vertically stratified structure may lead to lateral flow which redistributes the flow rate in different parts of packed bed.

• Journal of Mechanical Science and Technology
• /
• 제19권12호
• /
• pp.2303-2311
• /
• 2005

Super low temperature has many applications nowadays, from the chemical processing, automotives manufacturing, plastic recycling, etc. Considering of its wide application in the present and the future, study of the super-low temperature refrigeration system should be actively carried out. Super low state temperature can be achieved by using multi-stage refrigeration system. This paper present the development and testing of cascade refrigerator system for achieving super-low temperature. On this experiment, two different types of HCFCs refrigerants are utilized, R-22 and R-23 were applied for the high stage and the low-pressure stage respectively. The lowest temperature in the low-pressure evaporator that can be achieved by this cascade refrigeration system is down to $-85^{\circ}C$. This experiment is aimed to study the effect of inlet pressure of the low-pressure stage evaporator and low-pressure stage compressors inlet pressure characteristics to the overall temperature characteristics of cascade refrigeration system.

• Korean Chemical Engineering Research
• /
• 제51권1호
• /
• pp.127-135
• /
• 2013

본 연구에서는 개선된 바이오필터설계를 가지는 새로운 바이오필터의 압력강하 및 미생물 population 분포 등을 관찰하고, 같은 유효부피를 갖고 unidirectional flow (UF)를 갖는 전통적 바이오필터의 경우와 비교하였다. 개선된 바이오필터는 운전 초기 또는 정상상태의 장기운전에서 전통적 바이오필터 압력강하의 약 40~80% 이상을 감소시켰다. 미생물 population 분포는 바이오필터 담체인 폐타이어담체와 입상 활성탄의 두 경우 모두 바이오필터 top 단에서 가장 낮았고 바이오필터 밑으로 내려갈수록 미생물 population이 커졌다. 한편 폐타이어담체는 입상활성탄 담체보다 월등히 큰 미생물 population을 나타내는 미생물 콜로니 개체수(CFU counts)를 보였다. 개선된 바이오필터에서 악취가스가 $bottom{\rightarrow}up$으로 공급되는 경우에 악취가스가 $top{\rightarrow}down$으로 공급되는 경우보다 미생물 population 성장이 더욱 컸으며, 입상활성탄 담체보다 폐타이어담체에서 이 현상이 더욱 두드러졌다. 전통적 바이오필터와 개선된 바이오필터시스템 각각의 미생물 population 분포도를 비교하였을 때에, 개선된 바이오필터의 미생물 population은 전통바이오필터보다 입상 활성탄 담체와 폐타이어담체의 경우에 각각 약 15배 및 2.5배 만큼 더 고르게 분포되었다.