• Tribology and Lubricants
• /
• v.38 no.5
• /
• pp.205-212
• /
• 2022

This paper presents experimental measurements of the structural characteristics of a two-pad beam-type gas foil journal bearing and its rotordynamic performance for a high-speed motor-driven turbocompressor. The test bearing had two top foils and two beam foils, each with an arc length of ~180°. Each beam foil was etched to obtain 40 beams with six geometries of different lengths and widths. The insertion of beam foils into the bearing housing produces equivalent beam heights. The structural tests of the bearing with a non-rotating journal revealed a smaller bearing clearance and larger structural stiffness for the load-on-pad configuration than for the load-between-pads configuration. Rotordynamic performance measurements during driving tests up to 100 krpm demonstrated synchronous vibrations and subsynchronous vibrations with large amplitudes. The test was repeated after inserting the shim between the top foil and beam foil to reduce the bearing radial clearance. The reduced bearing clearance resulted in a reduction in the peak amplitude of the synchronous vibrations and an increase in the speed at which the peak amplitude occurred. In addition, the onset speed and amplitude of the subsynchronous vibrations were dramatically increased and diminished, respectively. The rotor coast-down tests at 100 krpm show that the reduction in the bearing clearance extends the time to rotor stop, thus implying an improvement in hydrodynamic pressure generation and a reduction in bearing frictional torque.

• Journal of Veterinary Science
• /
• v.24 no.3
• /
• pp.23.1-23.16
• /
• 2023

Background: Irritable bowel syndrome (IBS) is a functional bowel disorder (FBD). Objectives: To assess the therapeutic effects of paeoniflorin (PF) on IBS in rats. Method: Sixty male Sprague-Dawley rats were randomly divided into normal, model, positive drug, low-dose PF, medium-dose PF and high-dose PF groups (n = 10). After gavage for 2 consecutive weeks, the effect of PF on abdominal pain symptoms was assessed based on the abdominal withdrawal reflex (AWR) score, fecal water content and pathological changes in colon tissues. D-lactate, interleukin-1β (IL-1β), transforming growth factor-β (TGF-β) and tumor necrosis factor-α (TNF-α) were detected by enzyme-linked immunosorbent assay, and phosphorylated nuclear factor kappa B (p-NF-κB) p65 was detected by Western blotting. The abundance and diversity changes of intestinal flora were explored using 16S ribosomal RNA sequencing. Result: In PF groups, the mucosal morphology of colon tissues was intact, and the glands were arranged neatly and structured clearly, without obvious inflammatory cell infiltration. Compared with the model group, PF groups had significantly elevated pain threshold, and mRNA and protein levels of zonula occludens-1 (ZO-1) and occludin, decreased AWR score at 20 mmHg pressure, fecal water content, mRNA levels of IL-1β, TGF-β, and TNF-α, protein level of p-NF-κB p65 and level of serum D-lactate, and reduced levels of serum IL-1β, TGF-β, and TNF-α (p < 0.05, p < 0.01). PF groups had higher abundance of Lactobacillus, Akkermansia, Alistipes, and Bacteroides, but lower abundance of Desulfovibrio, Parasutterella, and Enterococcus than those of the model group. Conclusions: PF exerts therapeutic effects on IBS in rats probably by regulating the intestinal flora, and then up-regulating the expressions of ZO-1 and occludin in colon tissue while down-regulating the levels of IL-1β, TGF-β, TNF-α, D-lactate and p-NF-κB p65.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.22 no.1
• /
• pp.191-202
• /
• 2009

Purpose: This research is to investigate the needling Depth for Deqi based onone's age, weight, and the level of obesity and the different Deqi sensation in Chung-wan and Kwan-wan. Methods: We took a research on Deqi for the 123 patients who visited a local Korean Medicine clinic at random. The variants were the age, the weight, thetotal fat rate, the waist-hip rate, BMI, the weight size, and the Sasang constitution. Result: Older patients need more depth of Deqi in Chung-wan and Kwan-wan compared to the younger ones. The higher the level of obesity(weight, total body fat rate, the waist-hip rate, BMI) goes up, the more Deqi in Chung-wan and Kwan-wan goes deeply. As the level of obesity goes down in the order of Taeeum-in, Soyang-in, Soeum-in, the depth of Deqi also decreases in Chung-wan and Kwan-wan. Deqi in Chung-wan is the feeling of pressure around the acu-point, and Deqi in Kwan-wan is the feeling that it spreads out to the upper, lower, the right, and the left side of the acu-point. Conclusion: In case of Needling Depth for Deqi on Chung-wan and Kwan-wan, that increases or decreases as the age, the level of obesity(the physique), and the Sasang constitution changes.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.37.2-37.2
• /
• 2021

Turbulence produces the density and velocity fluctuations in molecular clouds, and dense regions within the density fluctuation are the birthplace of stars. Also, turbulence can produce non-thermal pressure against gravity. Thus, turbulence plays a crucial roles in controlling star formation. However, despite many years of study, the detailed relation between turbulence and star formation remain poorly understood. As part of the Taeduk Radio Astronomy Observatory (TRAO) Key Science Program (KSP), "mapping Turbulent properties In star-forming MolEcular clouds down to the Sonic scale (TIMES; PI: Jeong-Eun Lee)", we mapped two star-forming molecular clouds, the Orion A and the ρ Ophiuchus molecular clouds, in six molecular lines (¹³CO 1-0/C¹⁸O 1-0, HCN 1-0/HCO⁺ 1-0, and CS 2-1/N₂H⁺ 1-0) using the TRAO 14-m telescope. We applied the Principal Component Analysis (PCA) to the observed data in two different ways. The first method is analyzing the variation of line intensities in velocity space to evaluate the velocity power spectrum of underlying turbulence. We investigated the relation between the star formation activities and properties of turbulence. The other method is analyzing the variation of the integrated intensities between the molecular lines to find the characteristic correlation between them. We found that the HCN, HCO⁺, and CS lines well correlate with each other in the integral shaped filament in the Orion A cloud, while the HCO⁺ line is anti-correlate with the HCN and CS lines in L1688 of the Ophiuchus cloud.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.68.1-68.1
• /
• 2019

Turbulence plays a crucial role in controlling star formation as it produces density fluctuation as well as non-thermal pressure against gravity. Therefore, turbulence controls the mode and tempo of star formation. However, despite a plenty of previous studies, the properties of turbulence remain poorly understood. As part of the Taeduk Radio Astronomy Observatory (TRAO) Key Science Program (KSP), "mapping Turbulent properties In star-forming MolEcular clouds down to the Sonic scale (TIMES; PI: Jeong-Eun Lee)", we mapped the Orion A and the Ophiuchus clouds, in three sets of lines (13CO 1-0/C18O 1-0, HCN 1-0/HCO+ 1-0, and CS 2-1/N2H+ 1-0) with a high-velocity resolution (~0.1 km/s) using the TRAO 14-m telescope. The mean Trms for the observed maps are less than 0.25 K, and all these maps show uniform Trms values throughout the observed area. These homogeneous and high signal-to-noise ratio data provide the best chance to probe the nature of turbulence in two different star-forming clouds, the Orion A and Ophiuchus clouds. We present comparisons between the line intensities of different molecular tracers as well as the results of a Principal Component Analysis (PCA).

• Transactions of the Korean hydrogen and new energy society
• /
• v.34 no.6
• /
• pp.615-622
• /
• 2023

In this study, the theoretical analysis focused on the quantity of liquid hydrogen required for cooling down to 20 K, as well as the generation of boil-off gas (BOG) from the cooling process of the cryogenic components. The study involved calculating the amount of liquid hydrogen needed to achieve the desired temperature for the cryogenic components and subsequently determining the resulting BOG production at various reference temperatures. It was shown that it was important to efficiently lower the temperature of cryogenic parts through preliminary cooling. As a result, the reference temperature and pressure had an influence on the BOG generation on the cooling of cryogenic components using liquid hydrogen.

• Geomechanics and Engineering
• /
• v.36 no.1
• /
• pp.51-69
• /
• 2024

Currently, composite lining mountain tunnels in China are generally classified based on the [BQ] method for the surrounding rock grade. Increasingly, tunnel field construction is replicated indoors for scale down model tests. However, the development of analogous materials for model tests of composite lining tunnels with different surrounding rock grades is still unclear. In this study, typical Class III and V surrounding rock analogous materials and corresponding composite lining support materials were developed. The whole processes of excavation-support dynamics of the mountain tunnels were simulated. Data on the variation of deformations, contact pressures and strains on the surrounding rock were obtained. Finally, a comparative analysis between model tests and numerical simulations was performed to verify the rationality of analogous material development. The following useful conclusions were obtained by analyzing the data from the tests. The main analogous materials of Class III surrounding rock are barite powder, high-strength gypsum and quartz sand with fly ash, quartz sand, anhydrous ethanol and rosin for Class V surrounding rock. Analogous materials for rockbolts, steel arches are replaced by aluminum bar and iron bar respectively with both shotcrete and secondary lining corresponding to gypsum and water. In addition, load release rate of Class V surrounding rock should be less than Class III surrounding rock. The fenestration level had large influence on the load sharing ratio of the secondary lining, with a difference of more than 30%, while the influence of the support time was smaller. The Sharing ratios of secondary lining in Class III surrounding rock do not exceed 12%, while those of Class V surrounding rock exceed 40%. The overall difference between the results of model tests and numerical simulations is small, which verifies the feasibility of similar material development in this study.

• Nuclear Engineering and Technology
• /
• v.56 no.4
• /
• pp.1310-1319
• /
• 2024

The reactor cavity cooling system (RCCS) is a passive reactor safety system commonly present in the designs of High-Temperature Gas-cooled Reactors (HTGR) that removes heat from the reactor pressure vessel by means of natural convection and radiation. It is one of the factors responsible for ensuring that the reactor does not melt down under any plausible accident scenario. For the simulation of accident scenarios, which are transient phenomena unfolding over a span of up to several days, intermediate fidelity methods and system codes must be employed to limit the models' execution time. These models can quantify radiation heat transfer well, but heat transfer caused by natural convection must be quantified with the use of correlations for the heat transfer coefficient. It is difficult to obtain reliable correlations for HTGR RCCS heat transfer coefficients experimentally due to such a system's size. They could, however, be obtained from high-fidelity steady-state simulations of RCCSs. The Rayleigh number in RCCSs is too high for using a Direct Numerical Simulation (DNS) technique; thus, a Reynolds-Averaged Navier-Stokes (RANS) approach must be employed. There are many RANS models, each performing best under different geometry and fluid flow conditions. To find the most suitable one for simulating an RCCS, the RANS models need to be validated. This work benchmarks various RANS models against three experiments performed on the HTTR RCCS Mockup by the Japanese Atomic Energy Agency (JAEA) in 1993. This facility is a 1/6 scale model of a vessel cooling system (VCS) for the High Temperature Engineering Test Reactor (HTTR), which is operated by JAEA. Multiple RANS models were evaluated on a simplified 2d-axisymmetric geometry. They were found to reproduce the experimental temperature profiles with errors of up to 22% for the lowest temperature benchmark and 15% for the higher temperature benchmarks. The results highlight that the pragmatic turbulence models need to be validated for high Rayleigh natural convection-driven flows and improved accordingly, more publicly available experimental data of RCCS resembling experiments is needed and indicate that a 2d-axisymmetric geometry approximation is likely insufficient to capture all the relevant phenomena in RCCS simulations.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.1
• /
• pp.49-57
• /
• 2004

The effect of gas sparging on continuous fermentative $H_2$ production was investigated using external gases ($N_2$, $CO_2$) with various flow rates (100, 200, 300, 400 ml/min). Gas sparging showed a higher $H_2$ yield than no sparging, indicating that the decrease of $H_2$ partial pressure by gas sparging had a good effect on $H_2$ fermentation. Especially, $CO_2$ sparging was more effective in the reactor performance than $N_2$ sparging. The composition of butyrate, the main metabolic product of $H_2$ fermentation by Clostridium sp., was much higher in $CO_2$ sparging. $H_2$ production increased with increasing flow rate only in $CO_2$ sparging. The best performance was obtained by $CO_2$ sparging at 300 ml/min, resulting in the highest $H_2$ yield of 1.65 mol $H_2/mol$ hexoseconsumed and the maximum $H_2$ production of 6.77 L $H_2/g$ VSS/day. Compared to $N_2$ sparging, there could be another beneficial effect in $CO_2$ sparging apart from lowering down the $H_2$ partial pressure. High partial pressure of $CO_2$ had little effect on $H_2$ producing bacteria but inhibitory effect on other microorganisms like lactic acid bacteria and acetogens which were competitive with $H_2$ producing bacteria.

• Journal of the East Asian Society of Dietary Life
• /
• v.18 no.5
• /
• pp.692-701
• /
• 2008

This study was conducted with 150 adults of 20 years or older, all of whom lived in Seoul. The awareness of traditional Hangwa (Korean cookies) was shown to be relatively low, with 2.9 points on average, and the intake of traditional Hangwa for a month was 2.1 times. For the reason that traditional Hangwa couldn't become popular, and the opinion that the reason was because the price is expensive was the highest, at 3.8. The next highest reasons given were because it is difficult to buy, and because it is inconvenient to eat, at 3.0. The traditional Hangwa was shown to enjoy positive awareness as opposed to negative awareness, while the manufacturing sanitation was also recognized to be relatively clean, with 2.6 points assigned to the opinion that it doesn't taste good, and 2.7 points assigned to the opinion that the manufacturing sanitation is unclean. With regard to the excellence of traditional Hangwa, the response that 'our tradition can be handed down' was the most often encountered, with a score of 3.9. The traditional Hangwa was appraised as excellent, with 3.6 points assigned to the opinion 'it suits our body because it is made with our agricultural products' and 3.4% for each opinion 'safe ingredients are used' and 'all ingredients are good for health'. With regard to the level of agreement for the development of functional traditional Hangwa, the positive group was higher than 25.3% of the negative group, with 27.3% for 'agree very much' and 22.0% for 'agree'. When converted into a 5-point scale for the development of functional traditional Hangwa, the group that was positive toward its development was high, with 3.4 points on average. All categories of excellence awareness were correlated with the level of agreement for the development of a functional food product (p<0.001). Consumer awareness toward the addition of traditional Hangwa functionality was generally positive, with 3.3 points or higher on average, and awareness of the aging suppression and diabetes control effects of Hangwa was also high, with 3.5 points. Next were Hangwa for diet, Hangwa for blood pressure control, Hangwa for mineral supple-mentation and vitamin additive-type Hangwa, with 3.4 for each, and Hangwa for health preservation, with 3.3 in order. With regard to the degree of interest toward functional traditional Hangwa for the treatment of diseases, obese patients cited aging suppression, at 3.2, and vitamin additive Hangwa, at 3.0, while Hangwa for dieting was assigned 2.8 points. Patients with high blood pressure, blood circulation, and diabetes were all shown as having a high degree of interest in all items, while evidencing particular interest toward Hangwa for diabetes control and Hangwa for blood pressure control. With regard to intention to purchase while developing functional traditional Hangwa, the group asserting intention to purchase was higher than 60% for all items except for Hangwa for diabetes control (58.7%). The Hangwa for aging suppression was highest, at 68.6%, and shown as having intention to purchase during development in the order of vitamin additive Hangwa at 68.0%, Hangwa for mineral supplementation at 64.6%, each of Hangwa for health preservation and Hangwa for blood pressure control at 62.7%, Hangwa for diet at 62.6% and Hangwa for diabetes control at 58.7%. The considerations during the development of functional traditional Hangwa were in the following order: storage at 4.1 points, taste and level of function at 3.9 points, size at 3.5 points, and packing at 3.4 points.