• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.3
• /
• pp.239-245
• /
• 2018

If complication arises after glossectomy which leads to trouble in forming food bolus or transfer of the food, it is possible that either food bolus may block the airway or dysphagia may occur as the food bolus goes down into the airway. To solve the issue, palatal augmentation prosthesis could be used. In this case, the patient with an oral cancer is having difficulties swallowing food after glossectomy. Through taking impressions of polishing surface of his denture referring his tongue movement, the complete denture for the upper jaw was created using the concept of palatal augmentation prosthesis. This new upper denture increases the palatal-tongue contact pressure, allowing the patient to perform better swallowing and better pronunciation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.4 no.2
• /
• pp.89-99
• /
• 1984

Engineering properties of soils is studied by permeating injection of water-glass chemical grout by use of a large sized grouting equipment of 1.5 shot system. Furthermore, the effectiveness of chemical groutinig by taking water-glass chemical grout combined with portland-cement for the purpose of improving the soil strength is confirmed. Relationships between main factors which cause the effectiveness of chemical grouting are described, and the factors are velocity and temperature of flowing water; grain size distribution and density of soils; density, viscosity, gel time and volume of grouts; injection pressure and grouting process. Improvement of the effectiveness of chemical grouting in flowing water by preventing the dilution and flowing down of grouts is investigated. Moreover, local shear failures and upheaval phenomena of ground are also investigated by field measurement.

• Journal of muscle and joint health
• /
• v.10 no.2
• /
• pp.188-202
• /
• 2003

The aim of study was to investigate the effects of 12 forms of Sun-style Tai-Chi for arthritis(TCA) on physical symptom(pain, tenderness, swelling fatigue, and blood pressure), physical function(balance, flexibility, grip strength) and social-psychological health status in osteoarthritis(OA) patients and rheumatoid arthritis(RA) patients. This study was done with one group pretest-posttest design. A total 21 arthritis patients(6 OA patient and 15 RA patient) participated in 60 minute session consisting of warm-up exercise 12-main movement including qigong, and cool-down exercise twice a week for 6weeks. Physiological and social-psychological variables were measured before and after TCA 12 form. The researcher who completed a Tai Chi workshop for exercise leaders in Australia and Seoul taught the Tai Chi movement step by step until the patient felt comfort enough to perform them correctly by themselves during the first 4 weeks. At the last 2 weeks, the subject perform 10-15set of these at a session with traditional music to help patients move in a slow tempo. TCA 12 forms program showed significant improvement in fatigue(p=0.039) of rheumatoid arthritis patient and pain(p=0.006), fatigue(p=0.013), tenderness(p=0.032), flexibility(rt arm up, p=0.014, If arm up, P=0.003), grip strength(rt hand, p=0.002, If hand, P=0.003) of osteoarthritis patients. With assessment by Arthritis Impact Measurement Scale 2 questionnaire(AIMS2), physical component(0.002) and social interaction(0.025) on osteoarthritis patients were significantly improved. Evaluation of the participants about TCA exercise noted that the exercise was fairly easy(23.6%), moderately difficult(57.1%), and fairly difficult(14.3%). Considering the result of this study, TCA exercise program was more effective in pain, tenderness, grip strength, flexibility, and physical and social interaction on osteoarthritis patients than rheumatoid arthritis patients. Tai-Chi for arthritis 12 form was an appropriate intensity exercise for osteoarthritis patients.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.4
• /
• pp.551-561
• /
• 1998

This paper was studied to understand the characteristics of heat transfer coefficients and surface temperature distributions around a circular combustion chamber within the heat-intercept duct of kerosene fan heater. The experiment was carried out in the heat-intercept duct of kerosene fan heater attached to the blow-down-type subsonic wind tunnel with a test section of 240 mm * 240 mm * 1200 mm. The purpose of this paper was to obtain the basic data related with normal combustion for new design from conventional kerosene fan heater, and to investigate the effect of surface temperature, local and mean heat transfer coefficients versus flow-rate of convection axial fan according to the variations of heat release conditions from kerosene fan heater during normal combustion. Consequently it was found that (i) the revolution of convection axial fan during combustion had a smaller value than that of non-combustion because of the thermal resistance due to the high temperature in the heat-intercept duct, (ii) the pressure ratio P$_{2}$/P$_{1}$ had a comparatively constant value of 0.844 according to the revolution increase of turbo fan and the heating performance of kerosene fan heater had a range of 1,494 ~ 3,852 kcal/hr, (iii) the local heat transfer coefficient around a circular combustion chamber had a comparatively larger scale in the range of 315 deg. < .theta. < 45 deg. than that in the range of 90 deg. < .theta. < 270 deg. as a result of heat transfer difference between front and back of a circular combustion chamber, and (iv) the mean heat transfer coefficient around a circular combustion chamber increased linearly like a H$_{m}$=95.196Q+104.019 in condition of high heat release according to the increase of flow-rate of axial fan.n.

• Fashion & Textile Research Journal
• /
• v.14 no.3
• /
• pp.454-464
• /
• 2012

In this study, fitness tests for slacks were divided into shape fitness test and motion fitness test, and the fitness test conditions for slacks were designed as the first step for standardization of measuring scales. Shape fitness test consisted of analyzing the parameters of appearance sensory tests as described in preceding studies, performing a simulated appearance sensory test, collecting and considering apparel experts' opinions about the test parameters, and establishing test conditions in terms of test regions, descriptions and faces. For the regions of the abdomen, hip, crotch, thighs, and knees, the parameter of unnecessary wrinkle/stretch was observed from the anterior and posterior body, and then evaluated; for waist, hip, crotch, knee and hem circumference, the parameters of ease and horizontality were observed from the anterior body and posterior body followed by evaluation; and, at the levels of waist, hip, crotch, knee and hem circumference, the division of the lateral line were observed from the lateral body followed by evaluation. Motion fitness test was composed of reviewing and analyzing comparatively the methods of motion fitness tests as mentioned in preceding studies, and establishing test conditions in terms of test motions and test regions. For each of the waist, abdomen, hip, crotch, and knees, wear sensation was tested in the positions as follows: upright standing, moderate walking, chairsitting, bending forward to the maximum, and kneeling down, provided that as the measured points of garment pressure, anterior waist, abdominal protrusion, buttock protrusion, crotch, and midpatella were set and tested.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.6
• /
• pp.786-798
• /
• 2001

This paper describes the phenomena of wake-induced transition of the boundary layers on a NACA0012 airfoil using measured phase-averaged data. Especially, the phase-averaged wall shear stresses are reasonably evaluated using the principle of Computational Preston Tube Method. Due to the passing wake, the turbulent patch is generated in the laminar boundary layer on the airfoil and the boundary layer becomes temporarily transitional. The patches propagate downstream with less speed than free-stream velocity and merge with each other at further down stream station, and the boundary layer becomes more transitional. The generation of turbulent patch at the leading edge of the airfoil mainly depends on velocity defects and turbulent intensity profiles of passing wakes. However, the growth and merging of turbulent patches depend on local streamwise pressure gradients as well as characteristics of turbulent patches. In this transition process, the present experimental data show very similar features to the previous numerical and experimental studies. It is confirmed that the two phase-averaged mean velocity dips appear in the outer region of transitional boundary layer for each passing cycle. Relatively high values of the phase-averaged turbulent fluctuations in the outer region indicate the possibility that breakdown occurs in the outer layer not near the wall.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.5
• /
• pp.393-400
• /
• 2015

This paper describes the development of a chest-wearable robot that can efficiently perform self walking rehabilitation without a helper. The features of the developed robot are divided into three parts. First, as a mechanical characteristic, the conventional elbow crutch is attached at the forearm. However, the proposed robot is attached to the patient's chest, enabling them to feel free to use their hands and eliminate the burden of the arms. Second, as a characteristic of the driving algorithm, pressure sensors attached to the chest automatically perceive the patient's walking intention and move the robot-leg thereafter. Also, for safety, it stops operating when an obstacle is found in front of the patient by using ultrasonic sensors and generates a beeping sound. Finally, by using the scotch yoke mechanism, supporting legs are moved up and down using a rotary servo motor without excessive torque that is generated by large ground reaction forces. We showed that the developed robot can effectively perform self walking rehabilitation through walking experiments, and its performance was verified using Electromyograph (EMG) sensors.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.1
• /
• pp.25-29
• /
• 2011

The purpose of this study was to analyze quantitative and qualitative differences according to shoe type for the grand jete landing in ballet. The subjects for this study were 9 female ballet majors with an average of 12 years of experience. Subjects jumped, performing a front split, and landed on 1 foot, a movement called the grand jete. Analysis was performed on the students' landing. Independent variables were 3 shoe types: split sole, traditional out sole, and 5-toed forefoot shoes, with bare feet as a control group. Dependent variables were vertical passive ground reaction force and qualitative elements. Passive ground reaction force variables(maximum passive peak value, number of passive peaks, passive force-time integral, and center of pressure) were measured by the Kistler 9281B Force Platform. Qualitative elements were comfort, cushioning, pain, and fit. Statistical analysis included both 1-way ANOVA and Tukey's test for follow-up. Finalized data demonstrated that the 5-toed forefoot shoe allows the forefoot to expand and the toes to individually press down upon landing, increasing foot contact with the surface. Five-toed forefoot shoes minimize passive peaks and pain, while increasing comfort, cushioning, and fit. Most ballet movements are composed of jumping, balancing, landing, and spinning. Wearing 5-toed forefoot shoes allows for a natural range of movement in each toe, to improve both technique and balance. Pain and injuries from ballet can be minimized by wearing the correct shoe type. According to this analysis, it is possible to customized ballet shoes to increase the efficiency of techniques and movements.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.25-29
• /
• 2005

Axial fan is used for the supplement of large amount of flows. Axial blowers show relatively high efficiency of the system. The present model of axial fan is for cooling a condenser in an air-conditioning unit that exhibits tendency toward compact size. In order to realize the compact model, the width of an axial blade should be cut down in axial distance. Main interest lies on the performance of the axial blowing system with blades having shorter chord length. One of the important design parameters for axial fan is the shape of the blades of it. Design of blades includes the cross-sectional shape and its dimension, including the chord length. We consider two types of blades; one is NACA airfoil with normal chord length and the other is with shortening chord length by $10\%$ of normal airfoil. Axial blower with the modified blades is essential for the compact model of an air-conditioner. The other design parameters are same in the two cases. Using a wind tunnel follows ASHRAE standards carries out evaluation of performance of the system. Detail of flows around the blades is prepared by velocity measurements using PIV. According to performance estimation, the axial blower with short chord blade show quite close to the performance results, including flow rate and pressure rise, of the standard one. The reason of the two similar results is that the flowpatterns depend on Reynolds number based on the chord length of a blade. In this investigation, the critical chord length is found, in which the flows near the airfoil are so unstable and the performance of the system is decreased. A series of figures is for the detail information on the flow.

• Journal of computational fluids engineering
• /
• v.20 no.4
• /
• pp.14-20
• /
• 2015

Without electirc power to cool down the hot reactor core, passive systems utilizing natural circulation are becoming a big specialty of recent neculear systems after the severe accident in Fukusima. When we consider the natural circulation in a pool, thermal mixing phenomena may start from single phase circulation and can continue to two phase condition. Since the CUPID code, which has been developed for two-phase flow analysis, can deal with the phase transition phenomena, the CUPID would be pertinent to natural convection problems in single- and two-phase conditions. Thus, the CUPID should be validated against single- and two-phase natural circulation phenomena. For the first step of the validation process, this study is focused on the validation of single-phase natural circulation. Moreover, the CUPID code solves the fluid properties by the relationship to pressure and temperature from the steam table considering non-condensable gas effects, so that the effects from variable properties are included. Simple square thermal cavity problems are tested for laminar and turbulent conditions against numerical and experimental data. Throughout the investigation, it is found that the variable properties can affect the flow field in laminar condition, but the effect becomes weak in turbulence condition, and the CUPID code implementing steam table is capable of analyzing single phase natural circualtion phenomena.