• Journal of Information Technology Services
• /
• v.8 no.2
• /
• pp.147-156
• /
• 2009

As the result of the rapid development of IT technology, an on-line diagnostic system using the field bus communication network coupled with a smart sensor module will be widely used at the nuclear power plant in the near future. The smart sensor system is very useful for the prompt understanding of abnormal state of the key equipments installed in the nuclear power plant. In this paper, it is assumed that a smart sensor system based on the fieldbus communication network for the surveillance and diagnostics of safety-critical equipments will be installed in the harsh-environment of the nuclear power plant. It means that the key components of fieldbus communication system including microprocessor, FPGA, and ASIC devices, are to be installed in the RPV (reactor pressure vessel) and the RCS (reactor coolant system) area, which is the area of a high dose-rate gamma irradiation fields. Gamma radiation constraints for the DBA (design basis accident) qualification of the RTD sensor installed in the harsh environment of nuclear power plant, are typically on the order of 4 kGy/h. In order to use a field bus communication network as an ad-hoc diagnostics sensor network in the vicinity of the RCS pump area of the nuclear power plant, the robust survivability of IT-based micro-electronic components in such intense gamma-radiation fields therefore should be verified. An intelligent CCD camera system, which are composed of advanced micro-electronics devices based on IT technology, have been gamma irradiated at the dose rate of about 4.2kGy/h during an hour UP to a total dose of 4kGy. The degradation performance of the gamma irradiated CCD camera system is explained.

• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.55-63
• /
• 2015

PURPOSES : The objective of this study is to investigate the properties of recycled asphalt binders with five different rejuvenators, in order to evaluate the applicability of the recycled asphalt binders compared with the original asphalt binder. METHODS : In order to simulate recycled asphalt binders, fresh asphalt binders are aged by various Superpave aging procedures, such as the rolling thin-film oven (RTFO) and the pressure aging vessel (PAV). Then, selected rejuvenators are added to the aged asphalt binders in the amount of 5%, 10%, and 15%. The asphalt binder properties are evaluated by the dynamic shear rheometer (DSR), the rotational viscometer (RV), and the bending beam rheometer (BBR). In this study, AP-5 (penetration grade 60-80, PG 64-16) asphalt binder is used. A total of five types of rejuvenators are employed. RESULTS AND CONCLUSIONS : When considering aged asphalt without a new asphalt binder, it seems that the percentage of rejuvenator used in Korea is a bit too low, and that it fails to possess the characteristics of the original binder. From the current practice of evaluating the properties of recycled binder based on penetration ratio only, the amount of rejuvenator required is similar for the long-term-aged binder, but is excessive for the longest-term aged binder, causing deterioration of workability and stiffness of the recycled binder.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.3
• /
• pp.245-252
• /
• 2016

The development of Top-Mounted In-Core Instrumentation(TM-ICI) is an ongoing project to reduce the risk due to severe accidents by inserting the instrumentation into a reactor closure head instead of a reactor bottom head. As part of this project, environmental fatigue analyses for TM-ICI nozzle have been performed using two methods of NUREG/CR-6909 and Code Case N-761. TM-ICI nozzle is subjected to transient loads for level A, level B and test conditions that should be evaluated for a fatigue analysis. It is found that a cumulative usage factor considering reactor coolant environment for TM-ICI nozzle is evaluated as less than 1, which is ASME Code allowable criteria of a fatigue analysis.

• Nuclear Engineering and Technology
• /
• v.52 no.6
• /
• pp.1222-1230
• /
• 2020

The corrosion rates of the reactor pressure vessel materials of SA508 Grade 3 were measured using a weight loss method in aerated boric acid solutions to simulate the evaporation of leaked PWR primary water in an ambient environment. The corrosion behavior and products were examined using X-ray diffraction and electron microscopy. SA508 showed typical general corrosion characteristics. The corrosion rate increased steadily as the boron concentration was increased. As the immersion time elapsed, the corrosion rate slowly or rapidly decreased according to the oxidation reaction of iron. The corrosion rate showed a complicated pattern depending on the temperature; it increased gradually and then rapidly decreased again when reaching a certain transition temperature. The corrosion products of SA508 were found to be FeO(OH), Fe₂O₃, and Fe₃O₄. As the boron concentration decreased and the temperature was increased, the formation of Fe₃O₄ was more favorable as compared to the formation of FeO(OH) and Fe₂O₃. Consequently, the changes of the corrosion rate and behavior were closely related to the oxidation reaction of iron on the surface. The corrosive damage to SA508 appears to be most severe when the oxidation reaction is such that Fe₂O₃ forms as a corrosion product.

• Journal of Korean Biological Nursing Science
• /
• v.3 no.2
• /
• pp.69-90
• /
• 2001

The purpose of this study was to determine the effect of dance sports on physiological variables, depression and quality of life in the elderly. The study was performed on a non-equivalent control group pretest-posttest design for 47 elderly, who were conveniently assigned to experimental group and control group. The experimental group were selected from D-welfare facility and the control group were selected from G-elderly church club in G-city. The data were collected from April 2, 2001 to June 30, 2001, and analyzed by frequency, $x^2$-test, t-test and paired t-test using SAS/PC program. The results of this study were summarized as follows; 1. The first hypothesis, "the experimental group would have improved physiological variables than the control group.". 1-1. The hypothesis, "the experimental group would have lower blood pressure than the control group" was rejected. 1-2. The hypothesis, "the experimental group would have lower heart rate than the control group" was supported(t=-2.031, p=0.048). 1-3. The hypothesis, "the experimental group would have higher peripheral vessel $O_2$ Saturation than the control group" was rejected. 2. The second hypothesis, "the experimental group would have lower depression score than the control group" was supported(t=2.832, p=0.006). 3. The third hypothesis, "the experimental group would have higher quality of life score than the control group" was supported(t=2.604, p=0.012). After 12 weeks of dance sports program, it was shown that the program was effective to improve the physiological varibles, reduce depression and improve quality of life.

• The Journal of Korean Physical Therapy
• /
• v.20 no.4
• /
• pp.35-42
• /
• 2008

Purpose: Alterations in the structure and function of vascular smooth muscle cells (VSMCs) are important in cardiovascular disease and maintaining chronic hypertension. Chronic hypertension is associated with changes in vascular smooth muscle tone. The spontaneous or myogenic tone of a blood vessel reflects the ability to adapt smooth muscle tone to changes in transmural pressure. However, the intracellular signaling mechanisms involved in myogenic tone are not fully understood. Methods: Here, we investigated the relationship between mitogen-activated protein kinases (MAPKs) and phosphatidylinositol-3 kinase (PI3K) in isometric contraction and enzymatic activity using muscle strips from rats made hypertensive with aldosterone-analogue deoxycorticosterone acetate (DOCA) salts. Results: Changes in myogenic tone and intracellular $Ca^{2+}$ concentration ($[Ca^{2+}]_i$) were different after physiological salt solution (PSS) in normotensive and hypertensive rats. The myogenic tone and quiescent phosphorylation induced by the PSS treatment were inhibited by 10 ${\mu}$M PD098059, an extracellular-regulated protein kinase 1/2 (ERK1/2) inhibitor, and 10 ${\mu}$M wortmannin, an inhibitor of PI3K, in hypertensive rats. Conclusion: The development of DOCA-induced hypertension is associated with altered isometric contractions and $[Ca^{2+}]_i$ via changes in activation of ERK1/2 and PI3K after DOCA-salt treatment. Therefore, ERK1/2 and PI3K activity affect hypertension and may be suitable targets for physical therapy in cardiovascular disease.

• Archives of Reconstructive Microsurgery
• /
• v.6 no.1
• /
• pp.1-8
• /
• 1997

Recently prostaglandin $E_1(PGE_1)$ has been shown to ensure flap survival by producing vasodilation of the peripheral vessels and platelet disaggreation. However, direct observation and detailed quantitative studies of the effects of $PGE_1$ on the cutaneous microcirculation have not been reported. In the present study, we investigated cutaneous microcirculatory changes in the rabbit ear chamber(REC) with an intravital microscope following intravenous administration of $PGE_1$. The results obtained in this study indicate that $PGE_1$ administered intravenously at a rate of 200ng/kg/min might act directly on the vessels and cause dilatation of metarterioles and capillaries without affecting vasomotion and systemic blood pressure. Clinically in order to evaluate the effect of an intravenous administration of $PGE_1$ on the cutaneous microcirculation, cutaneous blood flow, skin temperature and transcutaneous $Po_2$ in the pedicle or free flap of operated patients were evaluated by the combination of several measurements following the administration of $PGE_1$. The present study suggests that improvement of cutaneous microcirculation by $PGE_1$ may enhance the survival rate of flap or replantation. Both vessel arterial ischemia and venous congestion are main factors of tissue necrosis in the flap surgery. Vasodilatory or antithrombotic agents have been used in salvage of flap necrosis. However, the therapeutic effects of those drugs are still not well elucidated. Recently prostaglandin $E_1(PGE_1)$ has been shown to ensure flap survival by producing vasodilatation of the peripheral vessels and platelet disaggregation[1-3]. Emerson and sykes[4] have obtained significant improvement in the flap survival in the rat using $PGI_2$. Suzuki et al.[5] have reported prolonged flap survival length by using $PGE_1$ in the rabbit and concluded that $PGE_1$ improved the microcircuration in the flap. However, direct observation and detailed quantitative studies of the effects of $PGE_1$ on the cutaneous microcirculation have not been reported. In the present study, we investigated microcirculatory changes in the rabbit ear chamber[6,7] with an intravital microscope following intravenous administration of $PGE_1$.

• Nuclear Engineering and Technology
• /
• v.20 no.1
• /
• pp.19-26
• /
• 1988

The low leakage leading pattern has features as the placement of some fresh fuel assemblies in the core interior to reduce the neutron fluence on the pressure vessel and to enhance the neutron economics. But as fresh fuel assemblies are loaded in the core interior, the local power tends to exceed safety limit due to the high reactivity of the fresh assemblies. Therefore, a large number of burnable poisons must be utilized in a low leakage scheme to suppress the high assembly power as well as the excess reactivity. In this study the effects of burnable poisons are treated as a perturbation on the power distribution, and the 'Power Sensitivity Coefficient' concept is adopted. An application study is performed for cycle 1 of the Korea Nuclear Unit-7 (KNU-7) to justify the usefulness of the reverse depletion method coupled with the above concept. To obtain the optimal burnable poision distribution at the given burnup step, the linear programming technique is adopted. The result shows maximum 4.5% error in the amount of burnable poisons between the calculated and the reference values. It is concluded that the design methodology which consists of the reverse depletion, the power sensitivity coefficient concept, and the linear programming technique can be used to find the optimal turnable poison distribution.

• Archives of Plastic Surgery
• /
• v.33 no.4
• /
• pp.510-513
• /
• 2006

Purpose: The Rectus abdominis muscle free flap is utilized in various reconstruction surgeries due to easiness in harvesting, consistency of vascular pedicle and reduced donor site morbidity. But rarely, femoral nerve injury during rectus abdominis harvesting can be resulted. We report a case of femoral nerve injury after rectus muscle harvesting and discuss the injury mechanism with the follow-up process of this injury. Methods: To reconstruct the defect of middle cranial base after wide excision of cystic adenocarcinoma of the external ear, rectus muscle free flap was havested in usual manner. To achieve a long vessel, inferior epigastric artery was dissected to the dividing portion of femoral artery and cut. Results: One week after the surgery, the patient noted sensory decrease in the lower leg, weakness in muscle strength, and disabilities in extension of the knee joint resulting in immobilization. EMG and NCV results showed no response on stimulation of the femoral nerve of the left leg, due to the defects in femoral nerve superior to the inguinal ligament. With routine neurologic evaluations and physical therapy, on the 75th day after the operation, the patient showed improvement in pain, sensation and muscle strength, and was able to move with walking frame. In 6 months after the operation, recovery of the muscle strength of the knee joint was observed with normal flexion and extension movements. Conclusion: Rarely, during dissection of the inferior epigastric artery, injuries to the femoral nerve can be resulted, probably due to excessive traction or pressure from the blade of the traction device. Therefore, femoral nerve injury can be prevented by avoiding excessive traction during surgery.

• Journal of Power System Engineering
• /
• v.21 no.2
• /
• pp.64-69
• /
• 2017

The purpose of this study is to investigate the performance characteristics of seawater cooling system for a fishing vessel. The circulation amount of refrigerant, condensation capacity, evaporation capacity, compression work and coefficient of performance(COP) were analyzed as the heat source temperature changed. The experimental setup consisted of an open-type compressor, a shell&tube type condenser, an evaporator and an expansion valve. The heat source was controlled by a constant temperature chamber. The main results of this study are summarized as follows. The condensation capacity increased with increasing heat source temperature, and it was confirmed that the effect of circulating amount of refrigerant was dominant. The amount of heat for vaporization was almost constant even though the temperature of the heat source increased. On the other hand, the compression power was increased. This is because the compression ratio increases as the condensation pressure, the enthalpy difference between inlet and outlet, the amount of circulating refrigerant increases. The performance coefficient of this system showed a tendency decreasing with increasing heat source temperature. Therefore, the basic data of the seawater cooling system for the maintenance of the catch line of the shore fishing boats was acquired through this study, and it is considered that it will be sufficient for the actual design.