• 대한기계학회논문집B
• /
• 제28권11호
• /
• pp.1322-1331
• /
• 2004

This paper presents studies on the design of water hydraulic system and components to replace oil with tap-water as the pressure transmission medium in hydraulic systems. In order to improve the performance of water hydraulic system, the thermal and hydraulic properties of tap-water are first investigated. Based on these characteristics, the design parameters, such as the clearances of the moving parts, the cross-sectional area of pipes and relative roughness, are proposed so that the performance of water hydraulic system is the same as that of oil. In addition, the operating ranges, which show the possibility of using water hydraulic system, are examined.

• 오토저널
• /
• 제13권3호
• /
• pp.32-42
• /
• 1991

In SI engine research the pressure data in cylinder is the most important fundamental ones leading to engine efficiencies and performances. It is, therefore, necessary to obtain accurate pressure data and yet it is often impossible to install a reliable data producing, flush-mounted type pressure transducer in a cylinder of small and medium size multicylinder SI engines. When flush mounting the transducer is not possible, the spark-plug type pressure transducer is commonly used as an alternative. In this case, the transmission tube of spark-plug type pressure transducer introduces distortions in the pressure signal. Efforts were made to understand the dynamic characteristics of spark-plug pressure transducer by shock tube tests and real engine experiments. In engine experiment the cylinder pressure data were simultaneously obtained by both flush mounted and spark-plug type pressure transducers of certain transmission tube geometry. Those pressure data collected by spark-plug type pressure transducer were tested for correction to flush mounted ones by the application of transfer function. As a result of the calibration the IMEP difference between F/M data and improved S/P data was shown to be corrected about 75-98% from the original ones.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2010년도 추계학술대회 논문집
• /
• pp.421-426
• /
• 2010

With hydraulic noise test facility, a variety of tests were performed to investigate the pulsation pressure generation mechanism and its transmission characteristics and to derive the noise control methodology. Many experiments were carried out by changing average pressure, flow rate, pump speed, hose length and MCV spool condition. From the test results, the correlations between pulsation pressure and other design parameters, such as static pressure, flow rate and MCV spool opening area and length of hose, were found out. And also each contribution factors were evaluated from the regression analysis. By changing hose length, the pulsation pressure resonance phenomenon was investigated. In order to find out the pulsation pressure reduction measures pulsation pressure analysis, such as pulsation pressure of hydraulic pump itself and pulsation pressure of hydraulic system, by using AMESim were studied. In addition hydraulic silencer was developed based on the Helmholtz resonator. And its performance was evaluated by installing the silencer at the excavator.

• 한국산림과학회지
• /
• 제108권4호
• /
• pp.562-573
• /
• 2019

국내 임목수확작업에 사용되고 있는 트랙터 기반 소형 타워야더는 소경재 생산을 목적으로 개발되었으며, 중대경재 수확 체제로 변화함에 따라 견인 성능의 개선이 필요하다. 이 연구는 동력 전달방식을 기존의 기계식에서 기계 유압식으로 개선하여 타워야더의 최대 견인력을 비교·분석하였으며, 트랙터 엔진속도, 유압식 동력 전달 기구의 압력을 변수로 두고 견인 성능 실험을 실시하였다. 실험 수준은 트랙터 엔진속도(1,200, 1,400, 1,600, 1,800, 2,000, 2,200 rpm) 6수준, 동력 전달 기구의 압력(4.9, 6.9, 8.8 MPa) 3수준으로 선정하였다. 기존의 경우 최대 견인력은 엔진 회전속도 757 rpm에서 15,146.6 N의 최대견인력을 발휘하였으나 개선된 타워야더는 엔진 회전속도 1,575 rpm에서 36,140 N의 최대 견인력이 나타나, 최대 견인력이 2.4배 증가되었다. 이에 따라 중대경재 위주의 목재수확 현장에서 작업이 가능할 것으로 판단된다. 또한 기존 장비를 재활용하여 성능 개선함으로써 견인력이 큰 집재장비의 신규 도입 및 운영에 필요한 비용을 줄일 수 있을 것으로 기대된다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2001년도 추계학술발표대회 논문집 제20권 2호
• /
• pp.223-226
• /
• 2001

Acoustic pressure transmission coefficient and phase velocity are measured as the functions of water porosity and air porosity in sand sediment slabs with water- and air-filled pores. Pores in the sand sediment slab we modeled as the structure of circular cylindrical tube shape filled with water and air. The first kind(fast) wave and second kind (slow) wave, identified by Biot, in the solid and fluid mixed medium are affected by the presence of water and air pores. Acoustic characteristics of such porous medium in water are also theoretically investigated in terms of the modified Biot-Attenborough (MBA) model, which uses the separate treatment of viscosity effect and thermal effect in non-rigid porous medium with water- and air-filed pores. The information on the fast waves introduces new concepts of the generalized tortuosity factor and dynamic shape factor.

• 한국소음진동공학회논문집
• /
• 제21권1호
• /
• pp.18-23
• /
• 2011

With hydraulic noise test facility, a variety of tests were performed to investigate the pulsation pressure generation mechanism and its transmission characteristics and to derive the noise control methodology. Many experiments were carried out by changing average pressure, flow rate, pump speed, hose length and MCV spool condition. From the test results, the correlations between pulsation pressure and other design parameters, such as static pressure, flow rate and MCV spool opening area and length of hose, were found out. And also each contribution factors were evaluated from the regression analysis. By changing hose length, the pulsation pressure resonance phenomenon was investigated. In order to find out the pulsation pressure reduction measures pulsation pressure analysis, such as pulsation pressure of hydraulic pump itself and pulsation pressure of hydraulic system, by using AMESim were studied. In addition hydraulic silencer was developed based on the Helmholtz resonator. And its performance was evaluated by installing the silencer at the excavator.

• 한국음향학회지
• /
• 제21권8호
• /
• pp.679-685
• /
• 2002

천해에서의 저주파 단상태 잔향음 모델 (L-HYREV: Low-frequency Hanyang univ. Reverberation model)을 개발하였다. 음선이론 (ray-theory)에 기초한 전파모델은 해저 내로 투과되는 음파에 대한 효과를 적절하게 고려할 수 없으므로, 해저 내 상호작용을 계산할 수 있는 전파모델이 필요하다. 따라서 본 논문에서는 RAM(Range dependent Acoustic Model)을 이용해서 전달손실을 계산 후, 다중경로 확장모델 (multi-path expansion model)을 이용해서 산출한 전달손실을 보정하였다. 모델의 검증을 위하여 GSM (generic sonar model) 잔향음 모의 신호 및 실측 잔향음 신호와 비교하였으며, 비교 결과 GSM보다 L-HYREV 모델이 저주파 잔향음 예측에 적합함을 확인할 수 있다.

• 대한전기학회논문지
• /
• 제37권12호
• /
• pp.872-878
• /
• 1988

During the past few years, a great deal of attention has been directed to the application of superconductivity to the electrical systems such as superconducting power transmission lines, superconducting magnet energy storage and so on. Yet in order to develop the practical model of these electrical equiqments utilizing suprconductivety and other phenomena at cryogenic temperautre, it is necessary to know the dielectric behaviour of insulating materials at cryogenic temperature in view of reliability, safety and economy of these machines. Investigation of dielectric properties of cryogenic liquids is very important due to the dual role of those as the dielectric and cooling medium. In this study, we investigated results measured over several kinds of dielectric characteristics of liquid nitrogen taking into consideration for application of high Tc superconductor. Dependence of breakdown voltage of gap width, polarity and pressure is reported in this paper and time delay characteristics of breakdown is also the subject of this discussion.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 춘계학술대회 논문요약집
• /
• pp.91-91
• /
• 2004

유압시스템은 1795년 J. Bramah가 물을 작동유체로 사용한 Press를 개발해 사용한 이래 2세기 이상 인간생활의 다양한 분야에 이용되어 왔다. 초기 유압시스템은 쉽게 구할 수 있고, 저장이 용이한 물을 작동유체로 사용하였다. 그러나 물은 부식성, 낮은 점성계수로 인한 저 윤활성과 많은 누설량, 그리고 저온에서의 동결 등과 같은 문제점을 가졌다. 당시에는 물에 대한 부식성이 없는 재료나 물의 누설을 막을 수 있을 만큼의 가공기술이 부족하였으므로 이러한 물의 문제점을 해결하기 위해 1906년 Wiliams와 Janney가 물 대신 기름을 작동유체로 사용하기 시작했다.(중략)

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1988년도 추계학술대회 논문집
• /
• pp.46-46
• /
• 1988

Structural and magnetic properties of Co-Cr-Mo films were investigated in connection with sputtering conditions. Films were prepared using a convention RF sputtering system. X-ray diffractometry, scanning electron microscopy and transmission electron microscopy were employed to investigate structure properties. Vibrating sample magnetometry was used for coercivity and saturation magnetization measurements. Co-Cr-Mo films displayed reasonable values of perpendicular coercivity and saturation magnetization for perpendicular recording media and showed good perpendicular orientation of the hcp c-axis to the film surface. Perpendicular coercivity was strongly dependent upon substrate technique showed better c-axis orientation than hose using the stationary substrate. Co-Cr-Mo films of 2.9 at. % Mo content showed maximum perpendicular coercivity and saturation magnetization. The films deposited at lower Ar pressure showed good magnetic properties. There was no explicit relationship between the columnar structure and c-axis orientation. Co-Cr-Mo films was found to have suitable structural and magnetic properties for perpendicular recording media.