• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.227-230
• /
• 2005

Many rheocasting processes had been proposed because of the difficulty of recycling, the limit of material, and the high cost of raw material in thixocasting. But, these rheocasting processes also had disadvantages such as the high initial Investment cost and the lower mechanical properties than thixocasting. In this study, a continuous fabrication of rheological material with pressure rotation equipment was newly devised to overcome the disadvantages of rheocasting process. In order to investigate the thixoformability, reheating experiments were carried out with the material fabricated by the newly devised equipment. Morphological characteristics between mechanical stirring and reheating were compared.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.919-921
• /
• 2000

This paper considers the research of the hybrid interrupter which adopts both rotating arc and thermal expansion technology. The operating principle of this device depends on rapid arc rotation due to the magnetic field created by the fault current through a coil which is mounted on contacts and also relies on the principle of thermal expansion created by arc energy in extinguishing chamber and finally causes pressure rise in expansion volume. In this research, the principle of the interrupting techniques are given and experimental results of hybrid interrupter which is developed by new technology is introduced.

• 비파괴검사학회지
• /
• 제9권1호
• /
• pp.106-110
• /
• 1989

Bolting degradation problems in primary coolant pressure boundary applications have become a major concern in the nuclear industry. In the bolts concerned, the failure mechanism was either corrosion wastage(loss of bolt diameter) or stress-corrosion cracking.(3) Here the manual ultrasonic testing of RPV(Reactor Pressure Vessel) and RCP(Reactor Coolant Pump) stud has been performed. But it is difficult to detect indications because examiner can not exactly control the rotation angle and can not distinguish the indication from signals of bolt. In many cases, the critical sizes of damage depth are very small(1-2 mm order). At critical size, the crack tends to propagatecompletly through the bolt under stress, Resulting in total fracture.(3) Automatic stud scanner for studs(bolts) was developed because the precise measurement of bolt diameter is required in this circumstance. By use of this scanner, the rotation angle of probe was exactly controlled and the exposure time of radiations was reduced.

• 전기학회논문지P
• /
• 제59권1호
• /
• pp.77-82
• /
• 2010

This study evaluated the characteristics and reliability of an auger crane with a built-in hydraulic extender. The field test of the hydraulic extender was performed with the hydraulic lines filled with hydraulic fluid and free of air. The pressure generated during the test was measured with a digital pressure gauge. The crane was considered to have undergone one cycle of the excavation process after it had performed excavation under three conditions at the same location. This process was performed three times in total. From the results of the excavation using the hydraulic extender, it was found that the maximum pressure and torque measured were 19.9 [MPa] and 895.4 [$kgf{\cdot}m$], respectively. The rotation force of the auger crane generated at this time signifies a horizontal force. If the excavation diameter of the auger crane is increased, the rotation speed is reduced causing the circumferential speed to also be reduced. The torsional shear stress of the extendable auger crane was calculated to be approximately 23.5 [MPa]. However, the rotation shaft material used for this system was carbon steel for machine structural use (SM45C). Since the minimum torsional yield stress is greater than 150 [MPa] according to KS D 3752, it means the equipment has secured a safety factor greater than 6. Therefore, it was found that when performing work using the extendable auger crane, it exhibited no problems with the safety and reliability of its shaft.

• Tribology and Lubricants
• /
• 제32권2호
• /
• pp.61-66
• /
• 2016

Total thickness variation (TTV), BOW, and surface roughness are essential characteristics for high quality sapphire substrates. Many researchers have attempted to increase removal rate by controlling the key process parameters like pressure and velocity owing to the high cost of consumables in sapphire chemical mechanical polishing (CMP). In case of the pressure approach, increased pressure owing to higher deviation of pressure over the wafer leads to significant degradation of the TTV. In this study, the authors focused on reducing TTV under the high-pressure conditions. When the production equipment polishes multiple wafers attached on a carrier, higher loads seem to be concentrated around the leading edge of the head; this occurs because of frictional force generated by the combination of table rotation and the height of the gimbal of the polishing head. We believe the skewed pressure distribution during polishing to be the main reason of within-wafer non-uniformity (WIWNU). The insertion of a hub ring between the polishing head and substrate carrier helped reduce the pressure deviation. Adjusting the location of the hub ring enables tuning of the pressure distribution. The results indicated that the position of the hub ring strongly affected the removal profile, which confirmed that the position of the hub ring changes the pressure distribution. Furthermore, we analyzed the deformation of the head via finite element method (FEM) to verify the pressure non-uniformity over the contact area Based on experiment and FEM results, we determined the optimal position of hub ring for achieving uniform polishing of the substrate.

• 한국군사과학기술학회지
• /
• 제21권3호
• /
• pp.255-263
• /
• 2018

This paper investigated design requirements for piston pumps, which were used as the power source of light rescue vehicle, and designed a piston pump satisfying such requirements. In order to satisfy the driving specification of the rescue device, the pump needs to be designed using the displacement volume of 110 cc/rev, the pressure of 350 bar and the rotation speed of 2,200 rev/min. The design was verified by flow and structural analyses respectively. The shape of the piston pump was optimized in terms of both flow characteristics and structural stability. A test equipment was also fabricated to verify the developed piston pump and test conditions were established. Finally, the developed piston pump was tested for its performance and operating temperature.

• 한국기계가공학회지
• /
• 제16권2호
• /
• pp.135-141
• /
• 2017

An experimental study of micro blasting for a rotating aluminum rod was conducted through the statistical analysis of ANOVA to obtain the effect of blasting conditions. The rotating equipment was designed and constructed with forward and backward moving for helical blasting, but rotation was used in this study. The blasting condition factors were the type of abrasive particle, nozzle diameter, pressure, standoff distance, injection time, etc. The width of the surface, the maximum depth of the sprayed surface, and ANOVA were analyzed by statistical analysis. The results showed that the contributions of the main factors were pressure, nozzle diameter, and injection particle.

• 한국터널지하공간학회 논문집
• /
• 제17권3호
• /
• pp.393-401
• /
• 2015

TBM 터널을 건설하는 동안 효율적이고 안전한 작업을 위하여 굴착 암반의 정확한 정보를 획득하는 것은 매우 중요하다. 이 연구에서는 터널 막장 전방의 암반 상태를 예측하기 위하여 선진시추장비와 시추공벽 영상화 장비를 이용한 TBM 전방 지반평가시스템을 개발하였다. TBM 전방 지반평가시스템은 선진시추장비와 시추공벽 영상화 장비, 분석 소프트웨어로 구성된다. 선진시추장비는 논코어링과 코어링 방법이 모두 적용 가능하도록 개발되었다. 또한 굴진 시 획득되는 피드압, 회전압, 회전수, 굴진속도 등의 천공영향 변수를 획득할 수 있다. 천공지수는 코어RMR과의 상관성분석을 통해 천공지수RMR로 환산된다. 개발된 시스템은 비탈면, 터널 현장에서 현장적용을 진행하였다. 현장 적용 결과 논코어링 방법은 코어링 방법에 비해 4배가량 빠른 굴진이 가능한 것으로 확인되었고, 천공지수RMR과 코어RMR은 유사한 분포를 나타내었다. TBM 전방 지반평가시스템은 신속한 지반예측이 가능하므로 공기지연을 최소화할 수 있는 막장 전방 예측 기술로의 활용이 기대된다.

• 한국기계가공학회지
• /
• 제19권11호
• /
• pp.64-69
• /
• 2020

To determine the effective factors for microparticle blasting with precise sequence position control in the x-axis and y-axis directions, we conducted a statistical experimental analysis of blasted square shapes by considering five condition factors. The control input and output were operated simultaneously by rotation-linear motion conversion and fine particles were blasted onto the aluminum specimen by precise position control driving using multiple execution codes. The micro-driving device used for processing was capable of microparticle blasting and of controlling the system through contact with a limit sensor at high speed and a two-degree-of-freedom driving mechanism. Our experiments were conducted on 1,050 specimens of pure aluminum (containing <1% of other elements). The effects of several factors (e.g., particle and nozzle diameters, blasting pressure, and federate and blasting cycle numbers) on the surface roughness and blasted surface's depth were verified through a statistical experimental analysis by applying the dispersion analysis method. This statistical analysis revealed that the nozzle diameter, the blasting pressure, and the blasting cycle number were the dominant factors.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.170.1-170
• /
• 2001

This paper developed the model for electro hydraulic force control system by identification method via ARMAX model. Implementation of Identification is performed on Pin-On-Disk type tribotester. The wear mechanism is an important mechanic property to select a material´s life and a optimum work condition. Pin-on-disk type tribotester is popular wear analysis experimental equipment and its mechanism is that adding a force on a rotating disk to simplify two surface contact´s wear experimental condition. Material´s rotating velocity and eccentricity rotation makes disturbance and it affects adding constant force. To get a high performance of force adding part, DDV(Direct Drive Valve) which has pressure control loop is used. To obtain a tribotester´ s ARMAX model, prediction error method(PEM) is used in case force adding part and rotating part is ...