한국기계가공학회지 (Journal of the Korean Society of Manufacturing Process Engineers)

  • 제16권2호
  • /
  • Pages.135-141
  • /
  • 2017
  • /
  • 1598-6721(pISSN)
  • /
  • 2288-0771(eISSN)
한국기계가공학회 (The Korean Society of Manufacturing Process Engineers)
권호 표지
DOI QR코드

DOI QR Code

회전하는 알루미늄 환봉의 미세입자 분사가공시 통계적 방법에 의한 분사조건에 대한 연구

A Statistical Study on the Blasting Conditions when Micro Blasting for Rotating Aluminum Rod

  • 투고 : 2017.01.31
  • 심사 : 2017.04.05
  • 발행 : 2017.04.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

An experimental study of micro blasting for a rotating aluminum rod was conducted through the statistical analysis of ANOVA to obtain the effect of blasting conditions. The rotating equipment was designed and constructed with forward and backward moving for helical blasting, but rotation was used in this study. The blasting condition factors were the type of abrasive particle, nozzle diameter, pressure, standoff distance, injection time, etc. The width of the surface, the maximum depth of the sprayed surface, and ANOVA were analyzed by statistical analysis. The results showed that the contributions of the main factors were pressure, nozzle diameter, and injection particle.

키워드

참고문헌

  1. Kim, H. T. and Kil, S. C., "Recent Research Trend of Friction Stir Welding Process," Spring Conference of The Korean Welding and Joining Society, Vol. 49, p. 77, 2008.
  2. Song, S. W., Kim, N. K. and Kang, C. Y., "Liquation Cracking of Mg and Al Alloys during Friction Stir Welding," Journal of The Korean Welding and Joining Society, Vol. 28, No. 5, pp. 28-34, 2010.
  3. Anoop, S., Natarajan, S., Kumaresh Babu, S.P., "Analysis of factors influencing dry sliding wear behaviour of Al/SiC p-brake pad tribosystem," Materials and Design, Vol. 30, No. 9, pp. 3831-3838, 2009. https://doi.org/10.1016/j.matdes.2009.03.034
  4. Goo, B. C. and Jung, H. S., "Finite element modeling of frictional heat in friction stir welding," Journal of The Korean Welding and Joining Society, Vol. 55, pp. 154-154, 2011.
  5. D. M. Brewis, G. W. Critchlow and C. A. Curtis, "Cyroblasting as a pretreatment to enhance adhesion to aluminium alloys : an initial study," nt. J. of Adhesion and Adhesives, Vol. 19 Issue 4, pp. 253-256, 1999.
  6. D. G. Kwon and D. H. Wang, "Optimal Blasting Conditions for Surface Profile when Micro Particle Blasting by Statistical Analysis of Orthogonal Arrays," Int. J. of KSMPE., Vol. 15 No. 4, pp. 148-154, 2016.
  7. Klokkevold PR. Nisshimura RD. Adachi M, Caputo A : Osseointegration enhanced by chemical etching of the tita-nium surface, A torque removal study in the rabbit. Clin Oral Impl Res 8:442-447, 1997 https://doi.org/10.1034/j.1600-0501.1997.080601.x
  8. Baker D. London RM. O' Neal R. Rate of pull-out strength gain of dual-etched titanium implants : A comparative study in rabbits. Int J Oral Maxillofac Implants 14:722-728,1999
  9. S. H. Kim, D. H. Wang and S. H. Lee, " The Characteristics of Surface Roughness when Micro Blasting of Titanium Alloy with Spiral Movement," J. of KSMPE, Vol. 11, No. 4, pp. 125-130, 2012.
  10. S. Y. Choi, D. G. Kwon, I. S. Park and D. H. Wang, "A study on the optimal conditions for machining accuracy when endmill fillet cutting at the corner," Int. J. of KSMPE., Vol. 15 No. 4, pp. 101-108, 2016.

피인용 문헌

  1. A Study of the Effectives for Surface Roughness by Cutting Angle and Cutting Fluid vol.17, pp.1, 2018, https://doi.org/10.14775/ksmpe.2018.17.1.057
  2. 고강도 경량화 산업용 풀리 개발을 위한 이종접합 사출풀리 제작에 관한 연구 vol.18, pp.6, 2017, https://doi.org/10.14775/ksmpe.2019.18.6.076