• Membrane Journal
• /
• v.25 no.5
• /
• pp.440-446
• /
• 2015

Nanofiltration composite membranes were prepared through the ion exchange polymers coating onto the porous microfiltration polyethylene (PE) membrane surfaces the salting-out and phase separated and pressurization (PSP) methods. The existence of coating on the surfaces was confirmed by the scanning electronic microscopy. The resulting membranes were characterized under the various conditions, such as the coating material, coating time, ionic strength etc., in terms of flux and rejection for NaCl 100 ppm solution. Under the same coating conditions of 10,000 ppm coating solution concentration and 3 atm coating pressure for both the coating materials of PEI and PSSA_MA, the flux 91.2 LMH and rejection 64.6% were obtained for PEI whereas 122.7 LMH and 38.1% were observed for PSSA_MA. From this study, it may be concluded that the composite membrane preparation is possible.

• Journal of the Korean Magnetics Society
• /
• v.9 no.3
• /
• pp.166-172
• /
• 1999

The magnetic properties between Mn-Ir antiferromagnetic layer and Ni-Fe ferromagnetic layer have been investigated in Mn-Ir/Ni-Fe/Zr on Si wafer formed by magnetron sputtering. Mn-Ir was sputtered from Ir chips and Mn target using D.C. power, Ni-Fe and Zr were deposited from Ni-Fe and Zr targets using D.C. power under Ar atmosphere. We studied the dependence of the magnetic properties on Ir content of Mn-Ir layer for Mn-Ir/Ni-Fe bilayer, and obtained the highest $H_ex$ of 219 Oe and the low $H_c$ of 30 Oe. And then focused on the effect of base pressure for Mn-Ir containing multilayers. Our experimental data showed that if the base pressure is higher than $3.0{\times}10^{-6}\;Torr$, the exchange anisotropy of Mn-Ir/Ni-Fe/Zr disappeared probably due to the grain refining of Mn-Ir film. In addition we have studied the dependence of Zr buffer on magnetic properties of Mn-Ir/Ni-Fe/Zr multilayers, and observed that Zr buffer about (111) texture and lower $H_c$ of Mn-Ir/Ni-Fe/Zr multilayer.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.2
• /
• pp.161-170
• /
• 2012

There are many factors to consider when attempting to improve the efficiency of fuel cell operation, such as the operation temperature, humidity, stoichiometry, operation pressure, geometric features, etc. In this paper, the effects of the operation pressure were investigated to find the current density and water saturation behavior on a cross section designated by the design geometry. A two-dimensional geometric model was established with a gas channel that can provide $H_2$ to the anode and $O_2$ and water vapor to the cathode gas diffusion layer (GDL). The results from this numerical modeling revealed that higher operation pressures would produce a higher current density than lower ones, and the water saturation behavior was different at operation pressures of 2 atm and 3 atm in the cathode GDL. In particular, the water saturation ratios are higher directly below the collector than in other areas. In addition, this paper presents the dependence of the velocity behavior in the cathode on pressure changes, and the velocity fluctuations through the GDL are higher in the output area than in inlet area. This conclusion will be utilized to design more efficient fuel cell modeling of real fuel cell operation.

• Proceedings of the Technology Innovation Conference
• /
• 1996.12a
• /
• pp.27-62
• /
• 1996

As an exploratory attempt, this study examines the patterns of global R&D activities of industrial firms, focusing on the management of overseas R&D centers in terms of their location, primary missions, management style, organizational structure and communication and global human resource management system Based on a review of existing studies mainly undertaken in advanced countries and cases of foreign MNCs, several hypothetical relationships are postulated : 1) There appears a strong relationship between the purpose and location of R&D activities : 2) Different levels of global management and technological capability lead to different types of overseas R&D organizations : 3) The relationship between autonomy of overseas R&D organizations and their R&D performance will be moderated by organization size, development time pressure, and a need for internal efficiency : 4) Frequent communication between the headquarter and overseas R&D organizations will increase R&D performance 5) Mutual exchange of R&D professionals between the headquarter and overseas R&D organizations will be positively related with R&B performance. In addiction, this study explores the current state of global R&D activities of selective firms in Korea, based on ie-depth interviews, and analyzes the sources of problems in their global R&D management. Finally, theoretical and managerial implications of this study are discussed and future research directions are proposed.

• Journal of Microbiology and Biotechnology
• /
• v.21 no.1
• /
• pp.43-49
• /
• 2011

As a rare sugar alcohol, L-arabitol can be used in food and can prevent extra fat deposits in the intestinal tract. Commercially, L-arabitol is prepared from pure L-arabinose by hydrogenation, which needs a high temperature and high pressure, leading to a high production cost for Larabitol. Therefore, this study describes a novel L-arabitol production method based on biological purification from the xylitol mother liquor, a cheap and readily available raw material that contains a high concentration of Larabitol. First, a novel Bacillus megaterium strain was screened that can utilize xylitol, sorbitol, and mannitol, yet not L-arabitol. The isolated strain was inoculated into a medium containing the xylitol mother liquor under formulated culture conditions, where a high L-arabitol yield (95%) and high purity (80%) were obtained when the medium was supplemented with 50 g/l of xylitol mother liquor. Upon further purification of the fermentation broth by ion exchange and decolorization, L-arabitol was crystallized with a purity of 98.5%.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.1
• /
• pp.89-94
• /
• 2011

The EGR system is one of important components in diesel engine. The regulation on NOx emission has been tightened up. Therefore, it is a significant issue to develop and commercialize the high efficient EGR cooler system that reduces NOx emission in DI diesel engine. Key performance factor of the EGR cooler system is how to properly design both wavy cooling fins and gas tubes. This paper proposes a high efficient EGR cooler that has been upgraded with both the optimized wavy cooling fins and the improved shape of structure. The evaluation of the heat exchange efficiency, outlet temperature, and gas pressure drop of the EGR cooler is performed with the prototype of the proposed EGR cooler. The result shows a good solution and will be implemented to the model of a clean diesel engine being developed for both domestic and overseas market.

• The Journal of Asian Finance, Economics and Business
• /
• v.7 no.12
• /
• pp.195-210
• /
• 2020

This study describes the structure of the capital markets for small- and medium-sized enterprises (SMEs) and startup companies in Korea, which is an emerging market that has experienced drastic changes. The overall capital market can be divided into private and public capital markets. In the private capital market, most of the demand for capital comes from non-listed private firms, including startups and SMEs. In the case of SMEs and startups, the KOSDAQ, the Korea New Exchange (KONEX), and primary collateralized bond obligations (P-CBOs) are part of the public capital market. SMEs and startups are generally incapable of raising sufficient capital owing to their low credit ratings, and they largely have limited access to primary markets to issue shares and borrow money. The Korean government has developed a systematic financial aid program to provide funds to these companies. The fund for SMEs has significantly contributed to the development of the venture capital market. Many Korean banks provide substantial lending to SMEs, but this lending is available only because of the Korean government's loan recovery guarantee. Furthermore, SMEs can issue corporate debt in the form of primary collateralized bond obligations through government guarantees, but such debt issuances have placed increasing pressure on public guarantee institutions.

• World Technopolis Review
• /
• v.4 no.2
• /
• pp.79-86
• /
• 2015

Over the last two decades, interest increased with regard to how some research universities made direct impacts on surrounding regional economic activities and growth. Although the role of basic research for most research universities has remained strong, pressure has intensified to broaden its missions to include helping local and regional economic development efforts. Consequently, many research universities have evolved their basic scientific research mission from the production of scientific knowledge to the sharing and exchange of knowledge with local industries by actively engaging in local economic development (Uyarra 2010). Previous examination has shown that most research universities contribute to local and regional economic development by various functions they provide. They are as follows: Creation of Knowledge, Human-capital creation, Transfer of existing know-how, Technological innovation, Capital investment, Regional leadership, Knowledge infrastructure production and Influence in regional milieu (Drucker and Goldstein 2007). This paper will review the existing literature on the role of universities and its impacts on local regional economic growth and development. In addition, this paper will show how two major research universities (The University of Arizona and Arizona State University) have contributed to the growth of Arizona during last two decades. It is believed that the existence of these two research universities have been instrumental in making industries more diverse and highly attractive, particularly in the Phoenix Metropolitan Area.

• Transactions of the Korean hydrogen and new energy society
• /
• v.20 no.3
• /
• pp.216-223
• /
• 2009

The relation between temperature and hydrogen desorption on variation in output was investigated for the metal hydride canister. For this study, an AB$_5$ type alloy were chosen as a hydrogen storage material in the metal hydride canister. And application to the single proton exchange membrane fuel cell was evaluated. As the results, the hydrogen desorption was linearly increased as the temperature was risen. In addition, metal hydride canister heating was able to correspond the variation of load as power request in the PEMFC system.

• Journal of computational fluids engineering
• /
• v.20 no.3
• /
• pp.20-26
• /
• 2015

This paper introduces a computational method for analysis of the 6-DOF motions of a ship in waves using an overset grid technique which consists of inner and outer domains for representing body motions and numerical wave tank, respectively. High order interpolation scheme is employed to increase numerical accuracy over the interface where physical values, such as velocities and pressure, interact between the inner and outer domains. The numerical schemes and algorithm are addressed in the present paper. An application to motion of KCS container carrier in head waves is presented, and the comparison of responses on heave and pitch motions shows good agreement with those of model tests.