• 소성∙가공
• /
• 제23권8호
• /
• pp.507-512
• /
• 2014

The objective of the current investigation is to establish techniques in micro pattern forming operations of polymeric circular tubes by using hydrostatic pressing. This method was developed and successfully applied to the micro pattern forming on polymeric plates. The key idea of the new technique is to pressurize multiple vacuum-packed substrate-mold stacks above the glass transition temperature of the polymeric substrates. The new process is thought to be a promising micro-pattern fabrication technique for two reasons; first, (hydro-) isostatic pressing ensures a uniform micro-pattern replicating condition regardless of the substrate area and thickness. Second, multiple curved substrates can be patterned at the same time. With the prototype forming machine for the new process, micro prismatic array patterns, 25um in height and 90 degrees in apex angle, were successfully made on the PMMA circular tubes with diameters of 5~40mm. These results show that this process can be also used in the micro pattern forming process on curved plates such as circular tube.

• Safety and Health at Work
• /
• 제7권4호
• /
• pp.389-393
• /
• 2016

Job hazard analyses were conducted to assess exposure to musculoskeletal disorder (MSD) risk factors in seven workers of three dry-cleaning establishments. In accordance with the Washington State Ergonomics Rule, the analyses were performed in two separate steps: (1) observation and checklist approaches were made to identify a "caution zone job" in the seven workers' pressing operations across the three shops; and (2) detailed posture and motion analyses were undertaken to determine a "MSD hazard" in one worker's operation using a video technique. One "caution zone job" was identified and it was the pressing operation job in which five physical risk factors were found in the pressing operations. The detailed analyses confirmed that one "MSD hazard", i.e., awkward posture in shoulders, was prevalent in the pressing operations of the three dry-cleaning facilities. It would be desirable to reduce MSD risk factors including awkward shoulder posture in the dry-cleaning industry.

• 대한기계학회논문집A
• /
• 제24권2호
• /
• pp.526-534
• /
• 2000

Near-net-shape forming of zirconia powder was investigated under the combination of cold die and isostatic pressing and pressureless sintering. A novel combination pressing technique, i.e., die com paction under cold isostatic pressing, allowed to produce a complex shaped ceramic powder compact with the controlled dimensions and relatively uniform density distributions. The constitutive models proposed by Kim and co-workers for densification of ceramic powder under cold compaction and high temperature were implemented into a finite element program (ABAQUS). Experimental data for relative density distributions and deformations of zirconia powder compacts produced by cold combination pressing and pressureless sintering were compared with finite element results. Finite element results agreed well with experimental data.

• 대한기계학회논문집A
• /
• 제24권9호
• /
• pp.2211-2219
• /
• 2000

Near net shape forming of 316L stainless steel powder was investigated under hot isostatic pressing. To simulate densification and deformation of a powder compact in a container during hot isostatic pressing, the constitutive model of Abouaf and co-workers was implemented into a finite element analysis. An optimal design technique based on the design sensitivity was applied to the container design during hot isostatic pressing. The optimal shape of the container was predicted from the desired final shape of a powder compact by iterative calculations. Experimental data of 316L stainless steel powder showed that the optimally designed container allowed precise forming of the desired powder compact during hot isostatic pressing.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.267-270
• /
• 2004

In Micro injection process, it is needed to the technique of making micro die, Rapid Thermal Pressing (RTP) and other techniques. Those techniques are independent. But the mutual connected system of techniques is needed. The target of this paper is the design of micro mold and the development of the entire micro injection techniques for functional polymer.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.409-412
• /
• 2000

Much research efforts have been made on the structure and properties of metals deformed to severe plastic deformation (SPD). Being deformed to SPD, ultra-fine grains (UFG) are usually formed, and UFG structure exhibits fundamental differences in original physical properties. One method often used to obtain SPD is equal channel angular pressing (ECAP). In order for this technique to be exploited, it is important to understand the deformation behavior during the ECAP processing with respect to friction. The finite element method (FEM) has been used to investigate this issue.

• 한국세라믹학회지
• /
• 제40권7호
• /
• pp.667-671
• /
• 2003

테이프 캐스팅법을 이용하여 알루미나/지르콘(반응결합 뮬라이트/지르코니아 유도)을 내부층으로 하고 알루미나/지르코니아 혹은 뮬라이트/지르코니아를 외부층으로 하는 산화물 층상 복합체를 고온가압소결법으로 제조하였다. 나노압입시험법을 이용하여 층상 산화물 복합체의 기계적 성질(경도 및 탄성계수)을 측정하고, SEM을 통하여 복합체의 미세구조를 관찰하였다. 산화물 층상 복합체의 제조를 위한 가열·냉각시 유도된 구성 산화물간의 열팽창 계수의 차이로 인하여 생성된 잔류응력을 하중-변위곡선을 이용하여 확인할 수 있었다.

• 한국생산제조학회지
• /
• 제20권6호
• /
• pp.785-792
• /
• 2011

Equal channel angular(ECA) pressing is the established processing technique in which a polycrystalline metal is pressed through the die to achieve a very high plastic strain. Therefore, the capability to produce an ultra-fine grain size in the materials is provided. To investigate that mechanical properties at elevated temperature have the ultrafine grain ECA pressing, experiments were conducted on an Al-4.8% Mg-0.07% Mn-O.06% Si alloy. After having been solution treated at 773K for 2hrs, the billet for ECA pressing was inserted into the die. And it was pressed through two channel of equal to cross section intersecting at a 90 degree angle. The billet can be extrude repeatedly because of 1:1 extrusion ratio. Since the billet is passed through the cannel for 2 times, a large strain is accumulated in the alloy. The tensile tests on elevated temperature were carried out with initial strain rate of $10^{-3}s^{-1}$ at eight temperature distributed from 293K to 673K.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.747-753
• /
• 2000

There has been a number of investigations in recent years reporting the results obtained on the structure and properties of metals deformed to severe plastic deformation (SPD). Being deformed to SPD, ultra-fine grains (UFG) are usually formed, and UFG structure exhibits fundamental differences in original physical properties. One method often used to obtain SPD is equal channel angular pressing (ECAP). In order for this technique to be exploited, it is important to understand the deformation behavior during the ECAP processing and relationship to the configuration of die. The finite element method (FEM) has been used to investigate this issue. It has been found that the plastic deformation is sensitive to the channel angle and material properties and is not uniform across the width of the specimen and the pressing load is relative to deformation during the ECAP processing.

• 동국한의학연구소논문집
• /
• 제8권2호
• /
• pp.155-173
• /
• 2000

한의학의 진단(診斷)에는 망(望) 문(聞) 문(問) 절(切)의 사진법(四診法)과 여러 가지의 변증체계(辨證體系), 즉 기혈진액변증(氣血津液辨證) 장부변증(臟腑辨證), 육경변증(六經辨證), 위기영혈변증(衛氣營血辨證), 삼초변증(三焦辨證), 사상체질변증(四象體質辨證) 등이 응용되어 지고 있으며, 또한 그와 더불어 병상(症狀) 증후감병진단법(證候鑑別診斷法)등이 선택적으로 활용되어 지고 있다. 이러한 광범위(廣範位)한 진단방법(診斷方法)가운데 절진(切診)은 손가락 및 손바닥의 감각(感覺)을 운용(運用)해서 일정부위(一定部位)를 촉지(觸指), 접압(接壓)하는 검사방법(檢査方法)으로써 절맥진(切脈診)과 접진(接診)으로 크게 나눌 수 있다. 이중 안진(按診)이란 손을 사용하여 직접 환부에 촉모(觸摸) 안압(按壓)하여 이상변화를 알아내고 나아가서는 질병(疾病)의 부위(部位)와 성질(性質)과 병정(病情)의 경중(輕重) 등의 내부(內部)의 변화(變化)와 체표(體表)의 반응(反應)을 관찰(觀察)하여 중요(重要)한 변증자료(辨證資料)를 얻는 진단방법(診斷方法)의 한 종류(種類)를 말한다. 또한 접진(接診)에는 안기표(按肌表), 접수족(接手足), 안흉복(按胸腹), 접유혈진법(接兪穴診法)등을 들 수 있다. 배유혈(背兪穴)의 진단법(診斷法)은 경기(經綺)이라는 반응로(反應路)를 통(通)하여 체표(體表)에 발현(發現)되는 압통(壓痛), 자발통(自發痛), 긴장(緊張), 이완(弛緩), 경결(硬結) 및 조색상물(條索狀物) 등의 현상(現象)으로 부터 내부장기(內部臟器)의 병변(病變)을 진단(診斷)하는 방법(方法)이다. 이에 저자(著者)는 접진(接診)의 내용(內容)과 방법(方法)을 연구하면서 십이경맥(十二經脈)의 시동병(始動病) 소생병(所生病)을 알아보고 혈위진단(穴位診斷)의 방법(方法) 및 주의점(注意點)등을 아울러 정리하므로써 다음과 같은 결론(結論)을 얻었다. 1. 유혈(兪穴)은 각(各) 장부(臟腑)의 사기(邪氣)가 주입(注入)하는 곳으로 장병(臟病) 한증(寒症) 허증(虛症)의 의미를 내포한 음성병증(陰性病症) 치료(治療)에 중요(重要)한 곳이다. 2. 유차(兪次)의 촉진(觸診) 즉(卽) 모지(母指)로서 척추극돌기(脊椎棘突起) 좌우측(左右側)을 접압(接壓)하여서 상향(上向)이나 하향(下向)으로 추압지(推壓指)하면 극돌기(棘突起)의 돌(突), 함요(陷凹), 긴장(緊張), 이완(弛緩) 및 압통(壓痛)의 출현부위(出現部位)에 따라 계통별(系統別) 질환(疾患)을 판단(判斷)할 수 있다. 3. 실제(實際) 임상(臨床)에서 환자(患者)의 진단(診斷) 치료(治療)에 있어서 배부접진(背部接診)은 중요(重要)한 진단(診斷)의 한 영역(領域)으로 빠뜨리지 말고 꼭 참고(參考)하여야 할 것으로 사료(思料)된다. 4. 장부질환(臟腑疾患)에 대한 진단방법(診斷方法)의 다양화(多樣化)와 치료영역(治療領域)의 확대(擴大) 및 치료율(治療率)의 상승(上昇)을 위해 배부유혈(背部兪穴)의 정확(正確)한 인식(認識)과 유혈접진(兪穴接診)을 통하여 정확(正確)한 진단(診斷)이 되었으면 한다.