Browse > Article

An Experimental Study for Mechanical Properties of Al-Mg-Mn-Si Alloy by ECA pressing  

Kook, Jong-Han (한국폴리텍VII대학 동부산캠퍼스)
Publication Information
Journal of the Korean Society of Manufacturing Technology Engineers / v.20, no.6, 2011 , pp. 785-792 More about this Journal
Abstract
Equal channel angular(ECA) pressing is the established processing technique in which a polycrystalline metal is pressed through the die to achieve a very high plastic strain. Therefore, the capability to produce an ultra-fine grain size in the materials is provided. To investigate that mechanical properties at elevated temperature have the ultrafine grain ECA pressing, experiments were conducted on an Al-4.8% Mg-0.07% Mn-O.06% Si alloy. After having been solution treated at 773K for 2hrs, the billet for ECA pressing was inserted into the die. And it was pressed through two channel of equal to cross section intersecting at a 90 degree angle. The billet can be extrude repeatedly because of 1:1 extrusion ratio. Since the billet is passed through the cannel for 2 times, a large strain is accumulated in the alloy. The tensile tests on elevated temperature were carried out with initial strain rate of $10^{-3}s^{-1}$ at eight temperature distributed from 293K to 673K.
Keywords
Ultra-fine; polycrystalline metal; Tensile test; Extrusion ratio;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Iwahashi, Y., Wang, J., and Horita, Z., 1996, "An Investigation of Microstructural Stabillity in an Al-Mg Alloy with Submicrometer Grain Size," Acta Materialia, Vol. 44, No. 7, pp. 2973-2982.   DOI   ScienceOn
2 Akhmadeev, N. A., Mulyukov, R. R., and Valiev, R. Z., 1993, "Strain Amplitude Dependence of Internal Friction and Strength of Submicrometer-grained Copper," Materials Sci & Eng., Vol. 171, No. 1-2, pp. 143-149.   DOI
3 Mayo, M. J., Hague, D. C., and Chen, D. J., 1993, "Processing Nanocrystalline Ceramics for Applicantions in Superplasticity," Materials Sci & Eng., Vol. 166, No. 1-2, pp. 145-159.   DOI
4 Ma, Y., and Langdon, T. G., 1993, "Cavity Growth in Superplastic Materials, the Significance of Fine Grain Nanocrystalline Structure," Materials Sci. forum, Vol. 126-128, No. 12, pp. 539.
5 Segal, V. M., and Semiatin, S. L., 1995, "Workability of a Gamma Titanium Aluminide Alloy during Equal Channel Angular Extrusion," Scripta Metall. Mater.. Vol. 133, No. 4, pp. 535-540.
6 Ma, Y., and Langdon, T. G., 1993, "An Examination of the Implications of Void Growth in Submicrometer and Nanocrystalline Structures." Materials Sci & Eng,, Vol. 168, No. 2, pp. 225-230.   DOI   ScienceOn
7 Choi, Y. H., Chong, T. H., and Lee, G. H., 2004, "Study on the Optimal Design for Plometary Gear Train Using Simulated Annealing," Proc. the KSMTE, pp. 175-176.
8 Valiev, R. Z., Mulyukov, R. R., and Ovchinnikov, V. V., 1991, "Mossbauer Analysis of Submicrometer Grained Iron," Scripta Metall. Mater., Vol. 25, No. 12, pp. 2717-2722.   DOI   ScienceOn
9 Myung, S. J., 2005, "Preparation and Piezoelectrical Properties of PMN-PZT Ceramics Prepared by High-energy Ball Milling," The Korea ceramic society, Vol. 42, No. 281, pp. 685-690.   DOI
10 Son, J. S., Kim, I. S., Kwon, W. H., Choi, S. G., and Park, C. J., 2000, "A Study on Development of Model for Prediction of Rolling Force in Tandem Cold Rolling Mill," Proc. the KSMTE, pp. 491-496.
11 Taylor, G. I., 1943, "The Mechanism of Plastic Deformation of Metal," Proc. Royal, Soc, Lodon, A145, pp. 362.
12 Valiev, R. Z., Krasilnikov, N. A., and Tsenev, N. K., 1991, "Plastic Deformation of Alloys with Submicron-grained Structure," Materials Sci & Eng,, Vol. 137, No.12, pp. 35-40.   DOI
13 Mott, N. F., and Nabarro, F. R., 1940, "An Attempt to Estimate the Degree of Precipitation Hardening with a Simple Model," Proc. Phys. Soc, Vol.52, No.1, pp. 86-89.
14 Seitz, F., 1952, "On the Generation of Vacancies by Moving Dislocation," Adv. Phys., Vol. 1, No. 12, pp. 43.   DOI
15 Cho, Y. S., Choi, M. G., Kim, J. M., Lee, S. H., and Shin, Y. E., 2007, "A study on Creep Characteristics of Solder Joint Applied to the SMT Electronic Divices," Proc. the KSMTE, pp. 16-21.