• 펄프종이기술
• /
• 제33권2호
• /
• pp.24-31
• /
• 2001

As a novel method to improve strength properties of recycled test liner, Condebelt press drying system was introduced and adopted into Korea. New press drying treatment could enhance the surface and strength properties in accordance with the increase of sheet density. However, Condebelt drying can not increase the density of repeatedly recycled test liner as much as that of virgin UKP and at the same density condition, the strength of Condebelt press dried UKP is greater than that of press dried test liner. In order to increase the strength of test liner, two attempts were tried in this study. First, addition of polyelectrolytes, dry strength agent was investigated with a view to promote the fiber bonding potential of reclaimed corrugated container pulp. Second, blending effect of fines were analyzed in an aims of increasing density and strength of test liner. The results were as follows; Even in the case of test liner densified by Condebelt press dryer, addition of amphoteric PAM as a dry strength agent was effective in increasing strength properties and so the effect of dry strength agent on improving bonding potential of recycled OCC fiber could be confirmed. As an appropriate addition level of amphoteric PAM, below 1% based on dry pulp weight was suggested. Different from virgin UKP, density of recycled test liner can be increased by the blending of OCC fines and strength properties also can be improved. However, excessive blending of OCC fines could result in decreasing of density and serious weakening of test liner. The best blending ration of fines in test liner can be determined as about 30%. Taking into account the fines content in general OCC pulp as 50%, excessive 20% of fines were supposed to be fractionated and removed in order to achieve the best strength of Condebelt press dried test liner.

• Journal of the Korean Wood Science and Technology
• /
• 제9권4호
• /
• pp.1-21
• /
• 1981

미송(美松) 및 포푸라 내수합판(耐水合板)을 내장용내화제(內裝用耐火劑)로 가압처리한 다음 저온(低溫), 중온(中溫) 및 고온건조상태(高溫乾燥狀態)에서 재건조(再乾燥)를 실시(實施)하였다. 붕사(硼砂)-붕산(硼酸), 크롬화(化) 염화아연, 미나리스, 파이레소오트 및 일종(一種)의 상업용(商業用) 내화제(耐火劑)로 내화처리(耐火處理)를 실시(實施)하였다. 건조방법(乾燥方法)은 키른건조(乾燥)와 열판건조(熱板乾燥)를 적용(適用)하였으며 건조속도(乾燥速度)와 건조결함(乾燥缺陷)에 관하여 검토(檢討)하였다. 붕사(硼砂)-붕산(硼酸)은 수분처리합판(水分處理合板)과 유사(類似)한 건조속도(乾燥速度)를 나타내었으나 기타(其他)의 내화제(耐火劑)는 일층(一層) 늦은 건조속도(乾燥速度)를 나타내었고 더 많은 건조결함(乾燥缺陷)을 일으키는 경향(傾向)이 있었다. 특(特)히 크롬화(化) 염화아연은 가장 건조속도(乾燥速度)가 느렸으며 가장 많은 건조결함(乾燥缺陷)을 일으키는 경향(傾向)이 있었다. 열판건조(熱板乾燥)는 키른 건조(乾燥)와 비교(比較)하여 같은 온도수준(溫度水準)에서 삼배(三倍)나 더 빨리 건조(乾燥)하였으나 열판압력을 50 $1b/in^2$(3.52$kg/cm^2$)를 적용(適用)하였기 때문에 두께 수축율(收縮率)은 이배(二倍)를 나타내었다.

• Nutrition Research and Practice
• /
• 제5권5호
• /
• pp.389-395
• /
• 2011

In the present study, a suitable drying method was developed for citrus press cakes (CPCs), which are produced as a by-product in citrus juice plants, and the protective effect of methanol extract of CPCs prepared by far-infrared radiation (FIR) drying against $H_2O_2$-induced DNA damage was evaluated versus that of freeze-dried CPCs. Methanol extract of FIR-dried CPCs exhibited comparatively good ROS scavenging activity versus the freeze-dried CPCs at the concentration of 100 ${\mu}g$/mL. The extract strongly enhanced the cell viability against $H_2O_2$-induced oxidative damage in Vero cells. Lipid peroxidation inhibitory activity of the extract from FIR-dried CPCs was comparable to that of the extract from freeze-dried CPCs. This sample also exhibited good protective effects against $H_2O_2$-mediated cell apoptosis as demonstrated by decreased apoptotic body formation in the nuclear staining with Hoechst 33342. In the comet assay, the CPC extracts exhibited strong inhibitory effects against $H_2O_2$-mediated DNA damage in a dose-dependent manner. Thus, this study demonstrated that FIR drying effectively preserves CPC as a functionally important natural antioxidant source and the FIR drying can be adapted for drying CPCs and is more economical for massive production than freeze drying.

• 한국산림과학회지
• /
• 제37권1호
• /
• pp.17-30
• /
• 1978

이태리포푸라재(材)의 건조(乾燥)의 한 방안(方案)으로서 열판건조(熱板乾燥)를 실시(實施)하여 건조중(乾燥中) 판재(板材)의 내부온도(內部溫度), 판재(板材)의 내부온도별(內部溫度別)에 따른 판재(板材)두께, 초기함수율(初期含水率), 말기함수율(末期含水率)과 건조시간(乾燥時間)의 관계(關係), 건조중(乾燥中) 함수율(含水率)과 건조속도(乾燥速度), 수축율(收縮率)과 복원율(復元率), 그리고 열판건조재(熱板乾燥材)의 생재비중(生材比重), 평형함수율(平衡含水率), 경단방향(徑斷方向) 전수축율(全收縮率) 등(等)을 조사(調査)하고 그 결과(結果)를 요약(要約)하면 다음과 같다. 1. 판재(板材)의 내부온도(內部溫度)는 건조초기(乾燥初期)에 급격히 상승(上昇)해서 15분(分) 동안 거의 일정(一定)하게 유지된 다음 서서히 상승(上昇)하였다. plateau temperature는 $114{\sim}119^{\circ}C$이었다. 2. 판재(板材)의 내부온도별(內部溫度別)에 있어서 판재(板材)의 건조시간(乾燥時間)(y)와 판재(板材)두께($x_1$), 초기함수율(初期含水率)($x_2$), 말기함수율(末期含水率)($x_3$) 사이에 관계식(關係式)은 다음과 같다. 3. 열판건조(熱板乾燥)의 건조시간(乾燥時間)(t)에 대(對)한 건조중(乾燥中) 함수율(含水率)(u)의 관계(關係)는 log u=4.658-0.060t(R=-0.990)이고, 건조속도(乾燥速度)(r)의 관계(關係)는 log r= -2.797-0.049t(R= -0.992)의 곡선(曲線)으로 각각(各各) 나타났다. 그리고 천연건조중(天然乾燥中) 함수율(含水率)과 건조속도(乾燥速度)는 그림 2 와 같다. 4. 열판건조중(熱板乾燥中) 건조시간(乾燥時間)(t) 에 대(對)한 판재(板材)두께 (y) 수축율(收縮率)의 관계(關係)는 log y= l.933+038t(R=0.927)이고, 판재복(板材福) 팽창율(膨脹率)(y)의 관계(關係)는 $y=-0.692+0.043t-0.001t^2(R=0.984)$의 곡선(曲綠)으로 각각(各各) 나타났다. 5. 말기함수율(末期含水率) 2%까지 건조시(乾燥時)에 열판(熱板)의 압력별(壓力別) 따른 두께 수축율(收縮率)은 압력(壓力) 높아질 수록 커졌으나 폭수축율(幅收縮率)과 두께 복원율(復元率)은 35psi에서 가장 컸다. 6. 열판건조재(熱板乾燥材)의 생재비중(生材比重)은 천연건조재(天然乾燥材)의 것보다 25% 증가하였으며, 평형함수율(平衡含水率)은 24% 감소하였고, 열판건조재(熱板乾燥材)의 항수축율(抗收縮率)은 27.7%이었다.

• 펄프종이기술
• /
• 제31권3호
• /
• pp.19-25
• /
• 1999

Effects of the process variable in Condebelt press drying including drying temperature, pressure , drying time, and moisture content of the sheets on the paper properties were examined. The experiment was performed with a static rig and Korean OCC was used as raw material. Significant improvement in sheet density, compression strength, tensile strength, surface smoothness ,etc. was obtained when condebelt drying was applied. Control of pressure and inlet dryness was found to be two most critical variables in improving sheet properties.

• Journal of the Korean Wood Science and Technology
• /
• 제29권1호
• /
• pp.9-15
• /
• 2001

침엽수 4수종(소나무, 잣나무, 낙엽송, 웨스턴 햄록)의 가열판 압체식 진공건조에서 소요되는 비에너지 곡선은 함수율 감소에 따라 서서히 증가, 거의 일정, 급속 증가 등 3단계의 증가 패턴을 나타내었고, 제재두께별 계산된 비에너지는 3cm 제재 0.483, 5cm 제재 0.649, 7cm 제재 0.814, 9cm 제재 0.977 및 11cm 제재 1.138kWh/kg로서 두께가 증가함에 따라 거의 직선적으로 증가하였고, 강한 건조스케줄을 적용한 비에너지는 약한 건조스케줄의 것보다 적었으며, 가열판 진공건조의 평균 비에너지는 0.712kWh/kg으로서 다른 건조법의 것보다 적었다.

• 펄프종이기술
• /
• 제31권4호
• /
• pp.8-15
• /
• 1999

The effects of Condebelt press drying on the densification of recycled sheets made from KOCC , AOCC UKP and BKP were examined using CLSM (Confocal Laser Scanning Microscope) and thermal image analysis techniques. It was shown that significant improvement in sheet density, compression strength, tensile strength, surface smoothness was obtained by Condebelt drying. Densification effect by press drying was most prominent for recycled KOCC sheets. And this beneficial effect of Condebelt drying of increasing sheet density and strength was shown to provide opportunities of reducing the utilization ratio of AOCC for cost saving.

• 펄프종이기술
• /
• 제41권1호
• /
• pp.52-60
• /
• 2009

A printing defect known as fluting (or waviness) of the web printed by heatset web offset printing process is one of the chronically serious problems deteriorating print quality. In this paper, fluting occurrence on uncoated papers was explored in terms of many printing conditions including drying temperature, fountain solution amount, ink supply, and press configurations. For this purpose, fluting on prints from real press runs was appraised in a quantitative manner. As results, ink supply was a distinctive factor for fluting such that the lower ink amount, the milder fluting. However increase in fountain solution seemed to make fluting severer while the effect of drying temperature was inconsistent for each paper. This result might indicate variable drying requirements for each paper. Thereby it was suggested that the optimum drying conditions related to the printabilities of each paper need to be established to minimize fluting potential. A press with short dryer and drastic cooling unit produced higher fluting. Suggestions for future work were given along with interpretation for the results.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 춘계 학술논문 발표대회
• /
• pp.260-261
• /
• 2014

When press concrete with high W/B was hardened, it should consider a crack to make stress by drying shrinkage. For control of crack, wire-mesh used to reinforce concrete in site. Actually, it reported failure case in lack of quality control. This study conducted experiment to apply fiber reinforced press concrete. it was evaluated on fresh property, compressive strength and shrinkage crack of press concrete with fiber.

• 한국의류산업학회지
• /
• 제11권6호
• /
• pp.961-967
• /
• 2009

In order to examine the availability of heat treatment for color developing in persimmon dyeing, the rayon fabrics dyed with persimmon extract from unripe persimmon which was used after stock and fermentation. Dyed fabrics were heated at various temperature and time by contacting press heat and drying heat. Color developing results were influenced by the difference of heating method. Press heating method is more available than drying heat method. Effect of temperature and time on ${\Delta}Ea^*b^*$ and color values of dyed rayon fabrics was considerable. Considering the practical aspect, The temperature around $140{\sim}160^{\circ}C$ and the time no longer 40 minutes can be reach the region of the full color developing by press heating process. It was very shortened than any other method(drying air heat, xenon radiation, sunlight). The dyed rayon fabrics with heat treatment have darker and deeper red-yellow color than which by sunlight and xenon radiation.