• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.127-131
• /
• 2006

There are being a lot of studies for achievement of high speed Dehydration, high-strength and Lightweight of washing machine in the latest washing machine business. It is essential that Press-joining Strength of Spin Drum Seaming division is improved .to attain that target. Generally, we are using Mechanical press-joining by Seaming and T.I.G (Tungsten Inert Gas) welding among part joint method. Mechanical press-joining method that is mainly using for Stainless Steel (STS430) Drum have lots of merit that consumption of energy is low more than welding and production costs cut down and generation of the corrosion is solved by removing weld zone defect and materials having different properties are enable to join without special equipment. But, it is difficult to realize joint strength required at high speed operation because joint strength of mechanical press-joining method is low remarkably in comparison with welding. Also, there are a lot of analysis difficulties and very limited research is under way due to the dynamic factor such as multistage plastic working, elastic recovery, residual stress etc. The results of this study show optimal joining condition for mechanical press-joining by performing lots of tensile joining strength test with various specimen under multi-change of important design factor such as seaming width, bead area and bead depth etc.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.85-90
• /
• 2001

Recent general Press brake has many problems in cutting high accurate products in the progress of industry. Previous hand-operated press brake needs many pre-processing works to adjust bending ang1e and marking-off works to calculate bending length. Also, the hand-operating work makes many geometric errors and has difficulty for variety-mass production. To solve these problems, this paper proposes Computer Numerical Control (CNC) general press brake and development of servo-control system based on database for reduction of geometric errors and pre-processing work time and high accuracy bending work.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2001년도 춘계학술대회
• /
• pp.31-37
• /
• 2001

The purpose of this paper is to supply the principal methods for the safety in the press industrial accident preventions and the basic analyzing theory in the press industrial accidents. It was reached the press machine installed companys and was analyzed the accident characteristics, types, the worker's working period and the distributed worker's age of the happened the press machine industrial accidents. The direct reasons are almost reasons of the press industrial accidents. But it should be not ignore the indirect reasons of the accidents In this study, it was presented that the safety devices is selected by the analyzed reasons in the press industrial accidents for the principal accident prevention.

• 대한안전경영과학회지
• /
• 제3권2호
• /
• pp.91-103
• /
• 2001

The purpose of this paper is to supply the principal methods for the safety in the press industrial accident preventions and the basic analyzing theory in the press industrial accidents. It was reached the press machine installed companys and was analyzed the accident characteristics, types, the worker's working period and the distributed worker's age of the happened the press machine industrial accidents. The direct reasons are almost reasons of the press industrial accidents. But it should be not ignore the indirect reasons of the accidents In this study, it was presented that the safety devices is selected by the amalyzed reasons in the press industrial accidents for the principal accident prevention.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.341-342
• /
• 2012

• 반도체디스플레이기술학회지
• /
• 제18권2호
• /
• pp.38-43
• /
• 2019

In this study, a hydraulic press structure has been investigated in order to enhance the precision machining and the productivity, which are generally damaged by the structural deformation from the pressure and the vibrations originated from the centrifugal forces from the rotating parts of the machine. Computer simulation based on the finite element method has been utilized for the analysis of static and dynamic characteristics to investigate each component's critical points, and to further improve the static and dynamic stabilities of a hydraulic press structure. The result shows that the deformations and the vibrations of the machine could be reduced 35% without increasing the weight of the machine.

• 대한안전경영과학회지
• /
• 제6권3호
• /
• pp.15-26
• /
• 2004

There is much dangerous machine in worksite. These make the rate of accidents increase. Specially, among them, dryness equipment work has the highest rate of accidents. Therefore, it has been managed by safety-health law. It is very important to make a special study of work using the dangerous machine. In press work, it is also important to develop safety system program to improve productivity and work safely In this reaserch. the safety mangement system is built for the work improvement of the Press. I will try new development method about dangerous machine.

• Journal of Advanced Marine Engineering and Technology
• /
• 제16권3호
• /
• pp.51-57
• /
• 1992

Authors had analyzed the Press machine's vibrational characteristics by Substructure Synthesis Method. This paper discribes the structural Dynamic Optimization for the machine using Sensitive Analysis Method. The substructure synthesis method and sensitive analysis methods are used for the vibration analysis and structural modification. The results obtained are as follows ; 1. The tooling precision of the press machine is ruled by the bending vibration of the slide. 2. The structural Modification Method for minimizing impact responses is proposed, and modal analysis and sensitive analysis method are introduced to solve it. 3. The impact responses of running machine were reduced to 40% of the unmodified machine by using the proposed method.

• 대한기계학회논문집A
• /
• 제38권1호
• /
• pp.79-88
• /
• 2014

제품 정밀도와 생산성 향상을 위해 고속프레스의 초고속화 및 초정밀화 기술이 더욱 중요해지고 있다. 그러나 고속프레스는 작동 속도 증가에 따라 슬라이드의 반복 위치 정밀도가 저하되고 프레스 구조 부품의 파손 위험성은 증가하는 것으로 알려져 있다. 따라서 고속프레스의 설계 정밀도를 향상시키기 위해서는 이런 문제점을 해석적으로 예측하고 설계에 미리 반영하는 것이 필요하다. 이번 연구에서는 편심 질량을 갖는 프레스 구동부 부품의 회전에 따른 동적 탄성 변형을 유한요소해석과 실험을 통해 분석하였다. 이를 통해 고속의 작동 조건에서 프레스의 정밀도와 파손 위험성 변화를 평가하였다.

• 한국생산제조학회지
• /
• 제5권3호
• /
• pp.22-30
• /
• 1996

In order to compensate for out-of-straightness of shafts, an automatic straightening process composed of an automatic measuring module, an automatic control unit and operating softwares was developed with a hydraulic press. The out-of-sraightness of each shaft was measured automatically in the measuring stage. An optimal pressure point was determined to minimize TIR value of the shaft according to press count of 3-points bending process. In the geometric adaptive control procedure, punch stroke and springback of the shaft were predicted by an observer using on-line measured values of press force and deflection amount I each press count. An automatic straightening machine was realized with the measuring module, the GAC module, PLD, IBM-PC and the operating software on the hydraulic press. the validity of the proposed straightening process was confirmed through a series of experiments with cam shafts.