• Journal of The Korean Association For Science Education
• /
• v.22 no.5
• /
• pp.957-969
• /
• 2002

Theoretical benefits and research findings on the use of Microcomputer-based Laboratory (MBL) are considered for using MBL in a way that will be of benefit to students and teachers, and discussed as a whole for further synthesis, including the formulation of a research agenda for future consensus-based action. Based on the findings obtained from a comprehensive review of the literature, using a systematic approach, the uses of MBL were compared and contrasted for advancing understanding of the teaching and learning processes in science and mathematics. A number of benefits were proposed by MBL developers but not investigated by educational researchers. A few research studies considered the following practical aspects raised by classroom science teachers: technical problems of MBL equipment; inaccuracy or incompleteness of presentation; efficient ways for handling class time with MBL instruction; and development of MBL curriculum materials for their own instruction. This lack of research related to the use of MBL in science classrooms resulted in educational research that was neither respected nor utilized by science teachers. Setting a research agenda based on the theoretical benefits and research findings is necessary for the effective use of MBL in science classrooms can help to maximize the prospects for successful school improvement projects while minimizing the innovation-related frustrations of individuals.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.381-381
• /
• 2011

The influence of the water vapor on the growth of single-walled carbon nanotubes (SWCNTs) was investigated. SWCNTs were synthesized by catalytic chemical vapor deposition of acetylene over Fe-Mo/MgO catalyst with injection of water vapor. The morphologies and structures of the water-assisted SWCNTs were investigated according to the growth conditions such as water vapor concentrations, flow rate of the gas, furnace temperature, and growth time. Water-assisted SWCNTs exhibited large bundle morphological features with well-alignment of each CNT, while SWCNTs synthesized in the absence of water vapor showed entangled CNT with the random orientation. We also found that the diameter of the SWCNT bundle could be controlled by the growth condition. In our optimal growth condition, the product yield and the purity were 300 wt. % and 75%, which were 7.5 and 2.5 times higher than those of SWCNTs synthesized without water vapor, respectively. More detail discussion will be offered at the poster presentation.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.462-462
• /
• 2013

Gallium Oxide (Ga2O3) has been widely investigated for the optoelectronic applications due to its wide bandgap and the optical transparency. Recently, with the development of fabrication techniques in nanometer scale semiconductor materials, there have been an increasing number of extensive reports on the synthesis and characterization of Ga2O3 nano-structures such as nano-wires, nanobelts, and nano-dots. In contrast to typical vaporliquid-solid growth mode with metal catalysts to synthesis 1-dimensional nano-wires, there are several difficulties in fabricating the nanostructures by using sputtering techniques. This is attributed to the fact that relatively low growth temperatures and higher growth rate compared with chemical vapor deposition method. In this study, Ga2O3 chestnut burr were synthesized by using radio-frequency magnetron sputtering method. In contrast to typical sputtering method with sintered ceramic target, a Ga2O3 powder (99.99% purity) was used as a sputtering target. Several samples were prepared with varying the growth parameters, especially he growth time and the growth temperature to investigate the growth mechanism. Samples were characterized by using XRD, SEM, and PL measurements. In this presentation, the details of fabrication process and physical properties of Ga2O3 nano chestnut burr will be reported.

• The Journal of the Korea Contents Association
• /
• v.15 no.2
• /
• pp.101-108
• /
• 2015

Location-sharing based service (LSBS) refers to a service that users share their location information with other users with whom friendship. At this time, the location information is shared through service provider, and then their position information is exposed to the service provider. The exposure of this personal position information to the service provider has raised a privacy problem, and thus privacy preserving mechanisms have been proposed to protect them. In this paper, we examine the types and features of the proposed location-sharing based services so far, and survey the research trend of privacy preserving mechanisms for them. Through the analysis on existing privacy preserving mechanisms, we present design factors for a privacy preserving mechanism for the current LSBS services, and suggest future work.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.91-98
• /
• 2020

In this paper, the creation method of edutainment content among cultural content types was studied. Edutainment aimed to enhance the creative thinking power through the "TRIZ theory" as an element of fun and education for learners at the same time. In this study, the modified OSTM-TRIZ theory was used not only in the technical field but also in the general sector. I proposed a model in which creative thinking can be enhanced to solve problems by analyzing contradictions encountered in the process of presenting problems. Nonlinear digital storytelling in animated folktales can elicit sufficient curiosity from learners, and problem presentation, problem resolution and contradiction analysis using OTSM-TRIZ work as an educational system to develop learners' creativity.

• Journal of Korean Port Research
• /
• v.15 no.1
• /
• pp.47-56
• /
• 2001

A numerical model for practical use based on the 1-line theory is presented to simulate shoreline changes due to construction of offshore structures. The shoreline change model calculates the longshore sediment transport rate using breaking waves. Before the shoreline change model execution, a wave model, adopting the modified Boussinesq equation including the breaking parameters and bottom friction term, was used to provide the longshore distribution of the breaking waves. The contents of present model are outlined first. Then to examine the characteristics of this model, the effects of the parameters contained in this model are clarified through the calculations of shoreline changes for simple cases. Finally, as the guides for practical application of this model, several comments are made on the parameters used in the model, such as transport parameter, average beach slope, breaking height variation alongshore, depth of closure, etc. with the presentation of typical examples of 3-dimensional movable bed experimental results for application of this model. Here, beach change behind the offshore structures is represented by the movement of the shoreline position. Analysis gives that the transport parameters should be taken as site specific parameters in terms of time scale for the shoreline change and adjusted to achieve the best agreement between the calculated and the observed near the structures.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.9
• /
• pp.780-785
• /
• 2012

In the current study, the authors propose a method for extracting license plate regions by means of a neural network trained to output the plates center of gravity. The method is shown to be effective. Since the learning pattern presentation positions are defined by random numbers, a different pattern is submitted to the neural network for learning each time, which enables it to form a neural network with high universality of coverage. The article discusses issues of the optimal learning surface for a license plate covered by the learning pattern, the effect of suppression learning of the number and headlight sections, as well as the effect of learning pattern enlargement/reduction and of concentration value conversion. Results of evaluation tests based on pictures of 595 vehicles taken at an underground parking garage demonstrated detection rates of 98.5%.

• Journal of Adhesion and Interface
• /
• v.3 no.1
• /
• pp.37-42
• /
• 2002

Adhesives are becoming increasingly accepted for advanced engineering/boding tasks. Therefore the understanding of the basic principles and the benefits of elastic bonding and structural bonding respectively is of utmost importance. Structural bonding means adhesive performance in load-bearing environments. Furthermore. the time to achieve handling strength has an impact on the economics of an assembly line. The paper gives briefly a summary about the fundamentals of elastic bonding and discusses different adhesive systems in the context of handling strength. Hereby the focus lies on the Warm Melt Technology, and its potential is compared to standard adhesives (l-part, 2-part and Booster Technology, a special 2-C system). Examples illustrate their economical benefits. Main Points : ${\bullet}$ The basic principles and benefits of elastic bonding ${\bullet}$ Warm-melt Technology in comparison with standard adhesives ${\bullet}$ Handling strength an economic issue ${\bullet}$ Combination with Booster-Technology, a special 2-C PUR system ${\bullet}$ Presentation of real world applications Learning Objectives: ${\bullet}$ Fundamentals of elastic bonding ${\bullet}$ Warm-melt Technology: correlation between chain length and cristallinity ${\bullet}$ Handling strength and curing speed of various systems in comparison ${\bullet}$ Real world applications illustrate the potential of the Warm-melt Technology.

• Journal of the Ergonomics Society of Korea
• /
• v.15 no.1
• /
• pp.1-14
• /
• 1996

Menu-driven interfaces are frequently employed for user interfaces on many electronic products. Due to space constraint, a single or multi-line display is popularly used to show menu items unlike the software interfaces. Single or multi-line display present 8 .approx. 21. characters on an LCD screen and the user selects items using a series of button pushes. Multi-line displays are different from the single-line ones in the following aspects. First, they can present multiple line of information at the same time. Second, they can present menu items in a various way compared to single-line ones. However, due to their space constraint multi-line displays have many limitations compared to ordinary displays which usually use 14" screens. Therefore, guidelines are necessary for designing efficent multi-line display menus interfaces. In this study, a human factors experiment was conducted to examine the effects of three design variables which might affect the usability of a multi-line display menus. Factors investigated include menu structure, number of lines on the display, and item presentation method. Usability of the multi-line display menus was measured quantitatively in terms of four different aspects: speed, accuracy, inefficiency and preference. The analysis of variance was used not only to analyze the main effects of the factors and their interactions but also to see the differences between the single-line display menus and multi-line display ones. A set of design guidelines drawn from this study can be applied to the design of the user interfaces of a various types of electronic consumer products.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.40
• /
• pp.12.1-12.5
• /
• 2018

Background: Subcutaneous emphysema refers to swelling caused by the presence of air or gas in the interstices of loose connective tissue. In the head and neck area, it may follow the fascial planes and is characterized by sudden swelling, crepitus on palpation, infrequent pain, and air emboli on radiography. It usually occurs as a complication in dental treatment. Some reports have described subcutaneous emphysema caused by dental procedures; however, severe emphysema related to peri-implantitis after treatment has not been documented. Accordingly, the current report describes a rare case of subcutaneous cervical emphysema resulting from the use of an air-powder abrasive device to treat peri-implantitis. Case presentation: Based on a review of the existing literature and the present case, nine cases of subcutaneous emphysema due to air-powder abrasive device have been reported. In most cases, the emphysema resolved over time after treatment with prophylactic antibiotics; among these, two were related to peri-implantitis management. Conclusion: Considering the frequent use of air-powder abrasive devices to treat peri-implantitis, the potential risk of iatrogenic emphysema related to this procedure needs to be addressed more extensively.