• 한국연소학회지
• /
• 제14권4호
• /
• pp.7-16
• /
• 2009

Porous metal plates (Metal fiber, muti-hole metal plate) using mainly in surface burner are known to have a corrosion and durability problem under high temperature condition. In this study, premixed flat flame with perforated ceramic tile of more durable cordierite material was examined with respect to combustion stability and emission. The flat premixed ceramic burner consists of perforated ceramic tile and various type of baffle plates to form stable surface flame. The results show that most stable flat flame is generated using baffle plate with open ratio of 0.193. In downward flat flame mode which is widely used in condensing boiler, CO is measured below 50ppm from equivalence ratio 0.755 to 0.765 and $NO_X$ is measured below 12ppm from equivalence ratio 0.75 to 0.79. It is also found that the range of blue flame in flame stability curve becomes wider with increasing heat capacity.

• 대한기계학회논문집B
• /
• 제24권10호
• /
• pp.1351-1358
• /
• 2000

Two dimensional aerosol dynamics considering the effects of particle generation, coagulation, thermophoresis, sintering and convection has been studied to obtain the growth of non-spherical silica particles in conjunction with determining flame temperature by performing combustion analysis of premixed flat flame. Heat and mass transfer analysis includes 16 species, 29 chemical reaction steps together with oxidation and hydrolysis of SiCl4. The effect of radiation heat loss has also been included. The predictions of flame temperatures and the evolution of particle size distributions were in a reasonable agreement with the existing experimental data.

• 대한기계학회논문집B
• /
• 제27권4호
• /
• pp.447-457
• /
• 2003

An experiment in a turbulent non-premixed flat flame was carried out in order to investigate the effect of swirl number on the flow and combustion characteristics. First. stream lines and velocity distribution in the flow field were obtained using PIV method. In contrast with the axial flow without swirl, highly swirled air induced stream lines along the burner tile. and backward flow was caused by recirculation in the center zone of the flow field. In the combustion. the flame with swirled air also became flat and stable along the burner tile with increment of the swirl number. Flame structure by measuring OH and CH radicals intensity and by calculating Damkohler number(Da) and turbulence Reynolds number(Re$_{T}$) was examined. It appeared to be comprised in the wrinkled laminar-flame regime. Backward flow by recirculation of the burned gas decreased the flame temperature and emissions concentrations as NO and CO. Consequently, the stable flat flame with low NO concentration was achieved.d.

• 한국자동차공학회논문집
• /
• 제4권6호
• /
• pp.1-10
• /
• 1996

In the present study, the structure and the characteristics of gaseous premixed flame impinging normal to the flat plate have been investigated experimentally. For the examination of the heat transfer and combustion characteristics, measurements of temperature, direct and schlieren photography were performed. The results of present study show that the length of inner flame becomes smaller as distance from nozzle exit to plate decrease. The width of flame becomes larger as air-fuel ratio decreases. The smaller Reynolds number at nozzle exit and the smaller distance from nozzle exit to plate lead to the higher heat transfer rate in the region of center of plate. As the air-fuel ratio decreases, the heat transfer at plate with moderate rate occurs on wide region.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2001년도 제22회 KOSCI SYMPOSIUM 논문집
• /
• pp.53-59
• /
• 2001

Experimental measurements are conducted to investigate the structure of flat $CH_4/O_2/N_2$ premixed flames. The flames are simulated using a detailed chemical kinetic mechanism. Four flames established at equivalence ratio = 0.55 are studied with the different $O_2$ enrichment level, ${\Omega}$ = 0.21, 0.25, 0.30, and 0.35. The measured flame speed and species composition profiles are compared with the calculations. Whereas there is overall good agreement between the measurements and predictions, it appears that as the $O_2$ enrichment level is increased the position of the flame is moved toward the exit of the burner and the rapid temperature rise happens near the exit of the burner, and some areas of further refinement in the kinetic mechanism are identified.

• 대한기계학회논문집B
• /
• 제35권10호
• /
• pp.1033-1040
• /
• 2011

예혼합 버너는 높은 효율과 낮은 배기 때문에 가정용 보일러 버너 시스템에 매우 강력한 버너이다. 일반적으로 가정용 보일러 버너는 내부에 농후한 예혼합 불꽃으로 구성하고 연료는 2차공기의 공급에 의하여 완전연소 되는 분젠 버너를 이용한다. 이것은 상대적으로 긴 불꽃 길이와 높은 과잉공기비에서 작동하기 때문에 높은 효율을 갖는 소형 보일러에 적용하기 어렵다. 이 논문에서 메탈 화이버, 세라믹, SUS 핀과 같은 매질을 사용하는 예혼합 연소 버너의 특징을 실험하였다. 특히, 표면 매질의 비반응 유동 특성은 버너 표면 전체의 유동 속도를 측정하고 조정하였다. 연소 실험은 화염 사진과 화염 온도 측정에 의하여 수행되었다. CO와 NO는 다양한 과잉 공기비와 열량값에 대하여 버너 표면 매질, 연소실, 열교환기의 특성을 측정하고 평가하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권4호
• /
• pp.397-405
• /
• 2011

친환경 대체에너지의 한 분야인 수소에너지는 물의 전기분해와 화석연료의 개질을 통해 얻어 진다. PEMFC용 개질기에 적용 가능한 난류예혼합 방식의 메탈화이버 플랫버너를 제작하였다. 공급열 량에 따른 연소영역의 평균온도분포와 CO, HC, $CO_2$ 및 $O_2$등 각종 화학종의 평균농도로 플랫버너의 화염구조 및 특성을 조사하여 개질기 적용 가능성을 확인하였다. 그리고 PIV 유동실험결과와 유동수 치해석 결과를 비교 분석하여 차후 PEMFC용 개질기 개발에 있어 수치해석을 적용하기 위한 기초연구를 진행하였다.

• 한국가스학회지
• /
• 제11권1호
• /
• pp.1-8
• /
• 2007

본 논문에서는 메탈화이버를 이용한 난류예혼합 플랫버너를 제작하여 다양한 연소조건하에서 화염의 안정화범위를 확인하였으며, 연료유량과 공기유량의 변화에 따른 균일가열 능력과 배기가스 특성에 관한 실험을 실시하였다. 그리고 화염의 안정성 평가를 위한 실험을 통해 화염을 공기유량 변화에 따라 청녹염, 복사염, 청염 영역으로 나눌 수 있었고, 이들 영역은 청염>복사염>청녹염 영역 순으로 연소상태가 양호하였다. 공기비에 따른 영향을 살펴보면, 본 실험에서는 연료유량 1과 4l/min에서는 공기비 ${\alpha}=1.5$가 적합하였으며 연료유량 2l/min에서는 ${\alpha}=2.0$이 적합한 것으로 나타났다. 한편 연료유량과 관계없이 공기비 ${\alpha}=1.3{\sim}2.1$범위에서는 연소소음이 발생했다.

• Journal of Mechanical Science and Technology
• /
• 제18권3호
• /
• pp.499-512
• /
• 2004

The effects of swirl intensity on non-reacting and reacting flow characteristics in a flat flame burner (FFB) with four types of swirlers were investigated. Experiments using the PIV method were conducted for several flow conditions with four swirl numbers of 0, 0.26, 0.6 and 1.24 in non-reacting flow. The results show that the strong swirling flow causes a recirculation, which has the toroidal structures, and spreads above the burner exit plane. Reacting flow characteristics such as temperature and the NO concentrations were also investigated in comparison with non-reacting flow characteristics. The mean flame temperature was measured as the function of radial distance, and the results show that the strong swirl intensity causes the mean temperature distributions to be uniform. However the mean temperature distributions at the swirl number of 0 show the typical distribution of long flames. NO concentration measurements show that the central toroidal recirculation zone caused by the strong swirl intensity results in much greater reduction in NO emissions, compared to the non-swirl condition. For classification into the flame structure interiorly, the turbulence Reynolds number and the Damkohler number have been examined at each condition. The interrelation between reacting and non-reacting flows shows that flame structures with swirl intensity belong to a wrinkled laminar-flame regime.

• 대한기계학회논문집B
• /
• 제36권12호
• /
• pp.1209-1215
• /
• 2012

관내 예혼합화염에서 나타나는 평면화염부터 난류화염거동까지의 천이현상에 대한 실험적 연구를 수행하였다. 천이현상의 관찰을 위해 관내에 평면화염을 형성하였고, 화염면 중심에 $CO_2$ 레이저를 조사하여 국부 화염속도를 증가시켰다. 레이저에 의해 변형된 화염은 전체 화염면적의 증가와 진동 불안정성의 거동을 보이며 전파한 후, 큰 소음과 함께 난류화염의 거동을 보이며 관 바닥으로 전파한다. 본 연구에서는 난류화염거동이 나타나기 전까지의 변형된 화염에 대한 동적 거동을 관찰하여 분석하였고, 이에 대한 물리적 모델을 제시하였다.