• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1438-1440
• /
• 2005

A power control and distribution unit(PCDU) plays roles of protection of battery against overcharge by active control of solar array generated power, distribution of unregulated electrical power via controlled outlets to bus and instrument units, distribution of regulated electrical power to selected bus and instrument units, and provision of status monitoring and telecommand interface allowing the system and ground operate the power system, evaluate its performance and initiate appropriate countermeasures in case of abnormal conditions. In this work, we perform the preliminary design of a PCDU scheme for the small LEO Satellite applications. The main constitutes of the PCDU are the battery interface module, the auxiliary supply modules, solar array regulators with maximum power point tracking(MPPT) technology, heater power distribution modules, internal converter modules for regulated bus voltage generation. and instrument power distribution modules.

• 상하수도학회지
• /
• 제12권4호
• /
• pp.33-42
• /
• 1998

The optimum design and preliminary cost estimations of air stripping towers ASTs with granular activated carbon adsorption (GAC) systems as the off-gas treatment were done and compared to liquid-phase GAC system. The optimum design and preliminary cost estimations were done for either single or multicomponent systems. A computer program was developed for this study. 15 single compounds and their multicomponent systems were studies. Even with off-gas treatment, AST was generally a less expensive process for treatment of volatile organics than liquid-phase GAC system. Treatment costs of small systems were sensitive to system capacity. Accumulative effect of treatment costs was found in multicomponent systems. The cost of a multicomponent system was highly dependent on the least strippable component in ASTs even with gas-phase GAC or the least adsorbable component in liquid-phase GAC system.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1043-1049
• /
• 2008

Trouble by excessive axial stress in CWR layed on a bridge is frequently happen, and this problem is induced from lack of considering on the track/structure interface on preliminary design stage. In this study, the sensitivity evaluation for the major influencing parameters, that is, expansion length of span, stiffness of super structure, arrangement of bearing, and strength of sub-structure, to the axial force in CWR on a bridge is conducted. From the sensitivity study, the guideline to reduce axial force efficiently in CWR for bridge engineer was suggested. The suggested guideline may not applicable for every case, but it is helpful for preliminary design of bridge.

• Ocean Systems Engineering
• /
• 제13권1호
• /
• pp.21-41
• /
• 2023

Decarbonization and energy transition can be considered as a main concern even for the oil industry. One of the initiatives to reduce emissions under studies considers the use of renewable energy as a complimentary supply of electric energy of the production platforms. Wind energy has a higher TRL (Technology Readiness Level) than other types of energy converters and has been considered in these studies. However, other types of renewable energy have potential to be used and hybrid concepts considering wind platforms can help to push the technological development of other types of energy converters and improve their efficiency. In this article, a preliminary hydrodynamic assessment of a new concept of hybrid wind and wave energy conversion platform was performed, in order to evaluate the potential of wave power extraction. A multiple OWCs (Oscillating Water Column) WEC (Wave Energy Converter) design was adopted for the analysis and some simplifications were adopted to permit using a frequency domain approach to evaluate the mean wave power estimation for the location. Other strategies were used in the OWC design to create resonance in the sea energy range to try to maximize the potential power to be extracted, with good results.

• 복식문화연구
• /
• 제21권5호
• /
• pp.613-628
• /
• 2013

This study aims to identify characteristics of neo-naturalism coming from periodical changes in the 21th society, culture based on naturalism and analyze the expressional and design characteristics of neo-naturalism on 2000s. For a research method, this study researched development of naturalism in fashion, and searched digital naturalism and ecology which are design paradigm effecting on neo-naturalism through literature research and preliminary study. Analyzing preliminary study on architecture, interior, fashion about digital naturalism and ecology design, concept of neo-naturalism identified and four expressional characteristics of neo-naturalism was classified, actual examples of neo-naturalism in 21th fashion were extracted and drew design characteristics. The results are as followings. Firstly, naturalism described nature as it is and developed according to the values and needs of the times. Naturalism in fashion showed natrual human body's curve, nature pattern and used natural materical focused on ideal beauty of nature. Secondly, neo-naturalism renews with the foundation of digital culture and ecology design paradigm, and focuses on the flexible possibility to express nature with digital, new media and formative art, and made the artificial nature uniting human-nature-environment as organic whole by ecology design paradigm. Thirdly, design of neo-naturalism divided four characteristics, nature's organic form, combination with the technology, ethical harmony with nature, global local design. The first characteristics of the nature's organic form are expressing silhouette of the nature's organic volume abstractly, the second ones of the combination with the technology are reinterpreting primitive nature contemporary with artificial sensibility of high technology, the third ones of the ethical harmony with nature are showing simple design and high-touch, and the forth ones of global local design are expressing cultural hybrid preserving vernacular design.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2004년도 추계학술발표회 발표논문집
• /
• pp.685-686
• /
• 2004

• 교육시설
• /
• 제5권4호
• /
• pp.64-77
• /
• 1998

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.62.2-62
• /
• 2002

1. Introduction 2. System description and preliminary results 3. SMC robust to mismatched uncertainties 4. Simulation results 5. Conclusions

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2003년도 춘계학술발표대회 요약집
• /
• pp.64.1-64.1
• /
• 2003

• 한국도로학회:학술대회논문집
• /
• 한국도로학회 2010년 추계학술대회 논문집
• /
• pp.47-52
• /
• 2010