본 연구에서는 보다 체계적이고 연계성 있는 소프트웨어(정보) 교육의 구현 및 정착을 위해 2015 개정 교육과정의 초·중등 소프트웨어 교육에서 제시하고 있는 내용체계 중, 내용 요소의 학교급별 계열성을 교육부 고시 제2017-126호에서 제시하고 있는 정보·컴퓨터 교사의 기본이수분야의 관점에서 분석하였으며, 전문가 검토를 통해 계열성 분석에 관한 타당도를 확보하여, 그 결과를 초·중등 교사가 현장에서의 교육과정 설계 및 수업 설계 과정에서 교육 내용에 관한 계열성을 고려하는데 참고할 수 있는 자료가 될 수 있도록 표로 구조화하여 제시하였다. 또한 각 계열성 분야의 교육내용에 관한 학교급별 위계성을 탐색하기 위하여 내용 요소와 연계된 성취기준의 핵심어인 학습요소를 분석하였으며, 이를 바탕으로 학교급별 소프트웨어 교육의 연계 방안을 제언하였다.
본 연구는 도살한 후 식용 부위를 제거하고 폐기되는 닭발을 이용하고자 닭발껍질에서 식품 소재인 gelatin을 추출하였다. 샐러드 드레싱의 물성 및 기호성 증진을 위해 닭발껍질에서 추출한 gelatin을 첨가하여 가공적성실험을 하였다. 결과는 다음과 같다. \circled1Gelatin - 한천용액으로 제조한 드레싱의 관능평가 결과에서 gelatin용액에 대한 조림간장의 함량이 10%인 것이 관능적으로 우수한 결과를 나타냈다. 겨자 마요네즈 드레싱은 마요네즈 함량이 낮을수록(10% 이하) 선호도가 좋아 마요네즈 첨가량이 적은 것이 바람직한 것으로 판단되었다. 참깨 드레싱은 gelatin 용액에 대한 참깨의 함량이 15%일 때 기호도가 높은 것으로 나타났다. \circled245$^{\circ}C$에서 전단속도에 따른 전단 응력을 관찰한 결과, 간장 드레싱의 점도는 조림간장의 첨가량이 증가할수록 처리구간 유의적인 감소를 나타냈고, 겨자 마요네즈 드레싱의 경우는 마요네즈 첨가량이 증가할수록 점도도 증가하는 것으로 나타났다. 참깨 드레싱도 역시 첨가량이 증가할수록 점도의 증가를 나타냈다. \circled3Gelatin의 첨가량을 달리하여 제조한 드레싱의 점도는 gelatin의 첨가량이 증가할수록 모든 시험구에서 유의적인 증가를 나타냈다. 마요네즈드레싱과 참깨 드레싱에서 gelatin첨가에 의한 혼탁도의 감소가 관찰되었다. 색도 측정 결과 gelatin첨가량에 따른 모든 처리구에서 유의적인 차이를 나타내지 않았다. \circled4Gelatin의 함량을 달리한 드레싱의 관능평가 결과, 전반적인 기호도는 gelatin-한천 용액은 2%의 gelatin과 0.5%의 한천을 함유한 것이 가장 우수한 것으로 나타났다.(Table 5). 이상의 결과들을 종합해 볼 때 닭발껍질로부터 추출한gelatin의 첨가는 물성학적, 관능적으로 더 우수한 것으로 나타나 새로운 소재로서 닭발껍질의 이용 가능성이 매우 크다고 판단된다. 또한gelatin을 이용한 드레싱의 개발은 한층 더 산업화의 일조를 할 수 있을 것으로 기대가 된다.
Supplementation of maturation medium with additional granulosa cells has beneficial effect on in vitro maturation of bovine follicular oocytes and their subsequent cleavage and development in vitro. However, maturation system using granulosa cells have some disadvantages that collection of granulosa cells is cumbersome and metabolic activity of the cells is variable according to ovarian cycle or follicular size. We hypothesized that bovine immsture oocytes matured without granulosa cell coculture can fertilize and develop normally if the medium volume per oocyte is reduced during in vitro maturation. Immature oocytes were matured for 24 hours in a TCM199 containing 10% fetal calf serum, anterior pitultary hormone (0.02 AU /ml Antrinⓡ) and estradiol with or without granulosa cells in vitro. In Group 1, 35 to 40 oocytes were matured in a well of 4-well plastic dish containing 500 $\mu$l of maturation medium and granulosa cells, and 9 to 10 oocytes were matured in a 50-$\mu$l drop of maturation medium without granulosa cells in Group 2. After maturation, oocytes were coincubated with sperm for 30 hours in a modified Tyrode's medium (IVF). Inseminated oocytes were cultured in a microdrop (30 $\mu$l) of a synthetic oviduct fluld medium (SOFM) containing BSA, Minimum Essential Medium essential and non-essential amino acids for 9 days. As a preliminary experiment, we investigated the beneficial effect of granulosa cells during maturation on subsequent cleavage and development using the same type of culturedishes (4-well dish). Granulosa cells could not increase embryo cleavage after fertilization but significantly improved (p<0.05) embryo development to expanding blastocyst (Table1 and 2). In Group 1, 68 and 80% of inseminated oocytes have cleaved at 30 hours and 2 days after IVF, respectively, which is similar (p>0.05) to the result of Group 2 (69% at 30 hours and 78% at 2 days after IVF). The oocytes in Group 2 showed 21 and 11% of developmental rates to expanding and hatching blastocysts, respectively, which was not significantly different (p>0.05) from those (20 and 10%, respectively) of oocytes in Group 1. In conclusion, it has been clarified that a microdrop culture system without granulosa cells for in vitro maturation can support bovine embryonic development to blastocyst in vitro as readily as a granulosa cell coculture system.
The flammable liquid conductivity is an important factor in determining the generation of electrostatic in fire and explosion hazardous areas, so it is necessary to study the physical properties of flammable liquids. In particular, the relevant liquid conductivity in the process of handling flammable liquids in relation to the risk assessment and risk control in fire and explosion hazard areas, such as chemical plants, is classified as a main evaluation item according to the IEC standard, and it is necessary to have flammable liquid conductivity measuring devices and related data are required depending on the handling conditions of the material, such as temperature and mixing ratio for preventing the fire and explosion related to electrostatic. In addition, IEC 60079-32-2 [Explosive Atmospheres-Part 32-2 (Electrostatic hazards-Tests)] refers to the measuring device standard and the conductivity of a single substance. It was concluded that there is no measurement data according to the handling conditions such as mixing ratio of flammable liquid and temperature together with the use and measurement examples. We have developed the measurement reliability by improving the structure, material and measurement method of measuring device by referring to the IEC standard. We have developed a measurement device that is developed and manufactured by itself. The test results of flammable liquid conductivity measurement and the data of the NFPA 77 (Recommended Practice on Static Electricity) Annex B Table B.2 Static Electric Characteristic of Liquids were compared and verified by conducting the conductivity measurement of the flammable liquid handled in the fire and explosion hazardous place by using Measuring / Data Acquisition / Processing / PC Communication. It will contribute to the prevention of static electricity related disaster by taking preliminary measures for fire and explosion prevention by providing technical guidance for static electricity risk assessment and risk control through flammable liquid conductivity measurement experiment. In addition, based on the experimental results, it is possible to create a big data base by constructing electrostatic physical characteristic data of flammable liquids by process and material. Also, it is analyzed that it will contribute to the foundation composition for adding the specific information of conductivity of flammable liquid to the physical and chemical characteristics of MSDS.
The deep geological repository of high-level radioactive waste shall be designed to meet the safety objective set in the form of radiation dose or corresponding risk to protect human and the environment from radiation exposure. Engineering feasibility and conformity with the safety objective of the facility conceptual design can be demonstrated by comparing the assessment result using the computational model for scenario(s) describing the radionuclide release and transport from repository to biosphere system. In this study, as the preliminary study for developing the high-level radioactive waste disposal facility in Korea, we reviewed and analyzed the entire list of FEPs and how to handle each FEP from a general point of view, which are selected for the geosphere region in the radiological safety assessment performed for the license application of the KBS-3 type deep geological repository in Finland and Sweden. In Finland, five FEPs (i.e., stress redistribution, creep, stress redistribution, erosion and sedimentation in fractures, methane hydrate formation, and salt exclusion) were excluded or ignored in the radionuclide release and transport assessment. And, in Sweden, six FEPs (i.e., creep, surface weathering and erosion, erosion/sedimentation in fractures, methane hydrate formation, radiation effects (rock and grout), and earth current) were not considered for all time frames and earthquake out of a total of 25 FEPs for the geosphere. Based on these results, an FEP list (draft) for the geosphere was derived, and the relative importance of each item was evaluated for conducting the radiological safety assessment of the domestic deep geological disposal facility. Since most of information on the disposal facility in Korea has not been determined as of now, it is judged that all FEP items presented in Table 3 should be considered for the radiological safety assessment, and the relative importance derived from this study can be used in determining whether to apply each item in the future.
한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
/
pp.975-976
/
1993
This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}
'연자미'는 국립식량과학원 바이오에너지작물센터에서 2008년에 육성한 식용 자색고구마 신품종으로 주요 특성과 수량성을 요약하면 다음과 같다. 1. 넝쿨길이는 284cm로 길며. 넝쿨색은 녹자색, 잎모양은 심장형, 잎색은 녹색을 띤다. 또한 잎뒷면의 엽맥색은 녹색으로 자색을 포함하지 않으며, 끝잎색은 녹색, 잎자루색은 녹색이다. 2. 괴근 모양은 장방추형으로 껍질색은 자색을 띤다. 육색은 대조품종 '신자미'가 농자색인데 비하여 자색이다. 상품성을 좌우하는 표피의 형태는 골파짐이 없이 메끄럽다. 3. 토양 병해충에 대한 저항성을 조사한 결과 대조품종인 '신자미'에 비하여 선충 및 덩굴쪼김병은 중강, 검은썩음병과 연부병도 중강을 나타낸다. 또한 저장 중 부패율은 4.2%로 저장성이 강하다. 4. 품질특성은 '신자미'에 비하여 식미가 우수하다. 육질은 중간질이며 당도가 15.3 $Brix^{\circ}$로 '신자미'보다 높다. 폴리페놀함량 및 항산화활성이 높아 기능성이 우수하다. 5. 수량은 조기재배의 경우 26.9 t/ha으로 '신자미'에 비하여 108%로 수량이 증수된다. 만기 및 적기재배는 25.9 t/ha으로 '신자미' 대비 115%로 수량이 높다.
소비자의 구매 행위가 합리적이고 실용적인 방향으로 변화하는데 힘입어 할인점업계는 급속한 외형적인 성장과 함께 경쟁도 치열하다. 따라서 업계는 그 해결책으로 차별화와 수익성을 동시에 실현 시킬 수 있는 유통업체 브랜드(PB: Private Brand) 개발에 사활을 걸고 있다. 또한 치열한 경쟁 환경 하에서 생존하기 위해서는 고객만족을 넘어서 고객충성도를 높이는 것이 효과적인 방법임이 밝혀짐에 따라 PB가 고객충성도를 제고시키기 위한 전략적인 도구로 사용되고 있다. PB 이용 고객의 충성도를 높이려면 우선 고객집단의 특성을 파악해서 소비자가 지각하는 품질수준을 우선적으로 맞춰줘야 고객만족과 고객신뢰를 얻을 수 있고 결과적으로 고객충성도로 유도할 수 있다. 이에 본 연구는 지각된 품질에 영향을 미치는 선행요인과 고객충성도에 영향을 미치는 변수들 간의 관계에 대한 체계적인 분석결과를 제시하기 위해 선행연구에서 검증된 인과관계를 기반으로 연구모형과 연구가설을 설정했고, 주요 연구결과는 다음과 같다. 기업명성, 브랜드명성, 제품경험, 브랜드친숙도가 높을수록 지각된 품질이 높아지고, 지각된 품질이 높을수록 고객만족, 고객신뢰, 고객충성도가 높아지며, 고객만족과 고객신뢰가 높을수록 고객충성도가 높아지는 것으로 조사되었다. 또한 기업명성이 지각된 품질에 미치는 영향력은 PB가 NB보다 높게 나타난 반면 브랜드명성과 브랜드친숙도가 지각된 품질에 미치는 영향력은 NB가 PB보다 높게 나타났다. 이러한 실증분석 결과는 지각된 품질에 영향을 미치는 선행요인과 결과요인에 대한 보다 명확한 이해를 바탕으로 실무자가 마케팅 활동을 하는데 유용하게 활용할 수 있을 것이다.
차령산맥 남북의 7개 유적에서 신석기시대 빗살무늬 토기부터 조선시대 백자까지 시대적으로 일부 시료를 선별하여 물리화학적 및 광물학적 정량분석을 통해 고대 세라믹의 제작기술과 특성을 해석하였다. 연구대상 선사시대 토기는 연질에 테쌓기한 흔적이 나타나며, 삼국시대 토기는 연질과 경질이 공존하나 자비와 저장용기는 모두 테쌓기한 반면 배식기는 물레성형하였다. 태토의 정선도가 높은 삼국시대 이후 토기와 달리 신석기 및 청동기시대 토기는 사질태토에 높은 광물 함량을 보이며, 태토보다 큰 비짐이 다량 확인된다. 청자와 백자 기질에서는 일차광물이 거의 나타나지 않으나 고온생성 광물의 함량이 높게 동정되었다. 분석시료들은 시기에 관계없이 유적에 따라 주성분 및 미량원소에 약간의 차이가 나타났다. 지구화학적 거동특성도 거의 동일하여 태토의 기본적 성질은 유사한 것을 지시한다. 작열감량은 0.01~12.59wt.% 범위를 보여 편차가 크나, 선사시대에서 삼국시대로 가며 급격히 감소한다. 이들은 소성에 따른 중량감소율과 관련이 있으며, 태토의 소성도와 고온생성 광물의 검출 함량에 따라 5그룹의 추정 소성온도로 분류된다. 신석기시대와 청동기시대 토기는 모두 $750{\sim}850^{\circ}C$ 그룹에 속하고, 삼국시대 토기는 $750{\sim}1,100^{\circ}C$의 소성온도 범위에서 다양하게 확인되며, 청자와 백자는 $1,150{\sim}1,250^{\circ}C$의 고온에서 소성된 것으로 나타났다. 제작시기에 따른 태토의 정선도와 소성온도 차이는 제작기술이 발전함에 따라 원료수급과 소성방식이 변화된 결과로 보인다. 그러나 같은 시기에도 제작방법에 차이를 보이기도 하여, 단순히 한 방향으로 진화된 발전보다는 사용 목적과 필요에 따라 활용한 것으로 해석된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.