• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2000.10a
• /
• pp.133-140
• /
• 2000

A suspension bridge with long span is distinguished by aesthetic point of view, but it is difficult to analyze the structural behaviors due to its geometric nonlinear characteristics. Futhermore, because the chance of design such special bridges is very rare, the assumption of initial dimensions of geometrical shapes and structural sections may be much difficult also. In this paper, the brief data base on the important structural dimensions of suspension bridges is constructed after the informations on existing suspension bridges are collected and classified from various texts and internet web sites. Therefore this data base may be utilized very easily by the designers who tries to design such bridges in the preliminary design step. Also the static geometric nonlinear analysis program is added to assist the designer in simple decision of safety check for assumed dimensions.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.95-97
• /
• 2005

Communication, Ocean, and Meteorological Satellite (COMS) to be launched in year 2008 will be the first Korean multi-purpose geostationary satellite aiming at three major missions, i.e.: communication, ocean, and meteorological applications. The development of systems for the meteorological mission sponsored by the Korea Meteorological Administration (KMA) consists of payloads, ground system, and data processing system. The program called COMS Meteorological Data Processing System (CMDPS) has been initiated for the development of data processing system. The primary objective ofCMDPS is to derive the level-2 environmental products from geo-Iocated and calibrated level 1.5 COMS data. Preliminary design for the level-2 data processing system consists of 16 baseline products and will be refined by end of 3rd project year. Also considered for the development are the necessary initial information such as land use and digital elevation map, algorithms for the vicarious calibration and procedures for the calibration monitoring, and radiative transfer model. Here, we briefly introduce the overall development strategy, flow chart for the intended baseline products, a few preliminary algorithm results and future plans.

• Journal of Information Technology Applications and Management
• /
• v.18 no.3
• /
• pp.41-59
• /
• 2011

This preliminary study held in two Indonesian state-owned enterprises (SOEs) showed empirical evidence that top management commitment was perceived to be the most important critical factor contributing to enterprise resource planning (ERP) implementation success, compared to top management support and top management involvement. Therefore, top management and middle management must continually show commitment during the ERP implementation process. This finding could serve as a reference for further study in a larger number of Indonesian SOEs.

• Journal of Korean Academy of Nursing
• /
• v.50 no.2
• /
• pp.228-241
• /
• 2020

Purpose: The purpose of this study was to develop an instrument to assess nursing professional pride. Methods: Fifty-six preliminary items were identified through literature review and focus group interview of nurses working in a hospital. Of these, 45 preliminary instruments were completed over 0.80 of content validity index. To verify the reliability and validity of the preliminary instrument, data were collected from 294 nurses. The data were analyzed using factor analysis and multidimensional scaling analysis. Results: From the factor analysis, 27 significant items were divided into 5 subscales. These subscales were as follows: feeling of vocation, role satisfaction, role of problem solver, self-achievement, and willingness to stay. The nursing professional pride also established criterion-related validity, discriminant validity, and group validity. Cronbach's α of the instrument was .92, and the subscales ranged from .74 to .85. Conclusion: The developed scale for nursing professional pride shows validity and reliability. The significance of this study is the development of an instrument capable of measuring nursing professional pride. To verify the relevance of this instrument, conducting comparative studies is suggested.

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.4
• /
• pp.451-458
• /
• 2007

A preliminary design approach for superyachts is introduced. The state-of-the-arts of superyachts is investigated and their characteristics are indirectly examined by analyzing the data collected from built vessels. The analysis of data provides a guideline for the establishment of an preliminary hull form of a superyacht. The rules and regulations governing the design and construction of superyachts are collected and considered. A modeling approach for prompt and efficient design is also introduced. A sample hull form of a selected superyacht is constructed using commercial design packages not only to produce a hull form but to analyze the hydrostatic and hydrodynamic performances of the constructed vessel. Various visualization techniques are considered as an efficient tool for design verification.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.885-891
• /
• 2011

This paper describes the results of preliminary design of rocket engine test facility for the performance evaluation of liquid rocket engine. Design specification and composition of rocket engine test facility are suggested based on the design requirements. The results of the preliminary design of rocket engine test facility will be used as base data for the detail design and construction of rocket engine ground test facility of KSLV-II 75tonf liquid rocket engine.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.2
• /
• pp.271-277
• /
• 1989

The purpose of this preliminary report was to describe the operating procedure of T-scan system and to identify the location, timing and force of occlusal contact in patient with normal occlusion using computerized T-scan system. From the preliminary observation , the author obtained the following results. 1. T-scan system displayed 2 dimensional and 3 dimensional description of occlusion: contact locations, timing (sequence) and forces of occlusal contacts. 2. The T-scan sensor was the most important part of the T-scan system. 3. The data of T-scan system cannot be stored in computer diskett. 4. The T-scan system is thought to be the most effective system to detect occlusal contacts and can be applied to the followings : occlusal diagnosis, occlusal equilibration, crown and bridge restorative procedures, denture adjustment, implant procedures, splint adjustment, laboratory procedures, periodontal treatment, orthodontics, TMJ treatment and patient education etc.

• Journal of the Korean Society of Combustion
• /
• v.18 no.3
• /
• pp.54-60
• /
• 2013

This paper shows a general development process for aircraft gas turbine combustors. As a first step for developing the preliminary combustor design program, several combustor sizing methodologies using reference area concepts are reviewed. There are three ways to determine the reference area; 1) combustion efficiency approach, 2) pressure loss approach, 3) velocity assumption approach. The current study shows the comparisons of the calculated results of combustor reference values from the pressure loss and velocity assumption approaches. Further works are required to add iterative steps in the program using more reasonable values of pressure loss and velocities, and to evaluate the sizing results using data for actual combustor performance and sizes.

• Nuclear Engineering and Technology
• /
• v.52 no.1
• /
• pp.51-58
• /
• 2020

Despite the recent growth of interest in molten salt reactor technology and the crucial role which heat transfer plays in the design of power reactors, specific studies on the design of heat exchangers for the Molten Salt Fast Reactor have not yet been performed. In this work we deliver a preliminary but quantitative analysis of the intermediate heat exchangers, based on reference design data from the SAMOFAR H2020-Euratom project. Two different promising reference technologies are selected for study thanks to their compactness features, the Printed Circuit and the Helical Coil heat exchangers. We present preliminary design results for each technology, based on simplified design tools. Results highlight the limiting effects of the compactness constraints imposed on the fuel salt inventory and the allowed size. Large pressure drops on both flow sides are to be expected, with negative consequences on pumping power and natural circulation capabilities. The small size required for the flow channels also represents possible fabrication issues and safety concerns regarding channel blockage.

• The Journal of Information Systems
• /
• v.28 no.2
• /
• pp.109-127
• /
• 2019

Purpose South Korea and China have a long and deep relationship from ancient times to the present. There are many exchanges between economic and educational or other aspects. It will be interesting to compare the perceptions of preliminary entrepreneurs in South Korea and China. Design/methodology/approach This study attempts to analyze the intentions of Korean and Chinese entrepreneurs, and to find the differences between Korean and Chinese entrepreneurs. The research model of this study is composed of internal and external affecting variables, and one dependent variable as the intention of entrepreneurs. A structured questionnaire was distributed to college students and graduate students in South Korea and in China. Data have been analyzed using a Lisrel 8.80 software. Findings The results of this study indicate that all variables except for successful role model have a positive influence on entrepreneurial intentions. The nationality partially mediates the causal relationship between independent variables and dependent variable. Some discussion and implications are suggested.