• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.138-140
• /
• 1994

In this paper, a three-phase active power filter using voltage- source PWM converter is designed to eliminate the harmonics and compensate the reactive power in the ac side. The predictive current control method is adopted, which provides constant switching frequency and low current ripple but has inherently one sampling error between the command and the actual current. Here we propose the algorithm which corrects this delay time. The converter voltage obtained from this current control can be accomplished by the space vector modulation method at a voltage-type converter. All control sequences of active filter is executed by a DSP which is designed to calculate floating points at very hight speed. Finally, the validity of this filter using the predictive current control method is demonstrated through experimental results.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1771-1779
• /
• 2018

Modern trams with a super capacitor have gained a lot of attention in recent years due to its reliability, convenience, energy conservation and environmental friendliness. Because of its special charging characteristic, the traditional charging structure and control strategy cannot satisfy its charging requirements. This paper presents a new charging topology for fast charging modern trams with a super capacitor and it designs a controller using continuous control set model predictive control (CCS-MPC). There are three contributions in this paper. First, a new charging structure is designed and its mathematics model is derived. The cascade structure is adopted instead of the parallel structure to simplify the control process and to keep the rated power of the controllable part low. Second, a MPC control strategy is proposed to satisfy the charging characteristic. The optimal control signal can be obtained by solving the designed optimization problem. The optimal control signal is related to the discrete control action. In addition, mapping between the continuous control signal and the discrete control action is designed. Third, a semi-physical experimental platform is built to verify the proposed topology and control method. The simulation model and experiment platform are built to verify the correctness of the new structure and its control method. The results obtained show that the new topology can work effectively.

• 한국항공우주학회지
• /
• 제38권1호
• /
• pp.35-41
• /
• 2010

최근의 항공기 개발에 있어 조종면을 복수 개로 분할하여 제어함으로써 예기치 못한 결함 발생 시 안전성 및 생존성을 향상 시킬 수 있는 재형상 제어에 관한 연구가 중요하게 대두되어 왔다. 본 논문은 조종면 결함 시 발생 가능한 조종면의 포화를 고려한 모델예측 제어기법을 이용한 재형상 제어를 다룬다. 모델예측 제어의 내부 모델로는 트림 조건에서 선형화된 운동방정식을 사용하며 조종면의 포화가 발생할 경우에 선형행렬부등식 기반의 반한정 프로그래밍을 이용한 최적화를 수행하며 그 외의 경우에는 모델예측 제어기법을 풀어서 구한 해석적인 해를 사용하는 제어기 구조를 제안한다. 제안된 알고리즘의 성능을 확인하기 위해 임의의 조종면 결함 상황에 대한 비선형 시뮬레이션을 수행하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1194-1198
• /
• 1993

Active roll control can improve handling and ride comfort. Dynamic characteristics of the hydraulic actuators for active suspension, which can be modeled as the 1'st order time lag system, hinders the performance improvement. To overcome this shortcoming a predictive controller is designed based on 3 d.o.f. linear vehicle handling model. The effect of this controller is studied through the simulation based on 10 d.o.f. nonlinear vehicle model and the results is compared to that of feedforward controller which uses lateral acceleration as control signal.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.754-759
• /
• 1993

An adaptive model predictive control (AMPC) strategy using auto-regression moving-average (ARMA) models is presented. The characteristic features of this methodology are the small computer memory requirement, high computational speed, robustness, and easy handling of nonlinear and time varying MIMO systems. Since the process dynamic behaviors are expressed by ARMA models, the model parameter adaptation is simple and fast to converge. The recursive least square (RLS) method with exponential forgetting is used to trace the process model parameters assuming the process is slowly time varying. The control performance of the AMPC is verified by both comparative simulation and experimental studies on distillation column control.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.22-25
• /
• 1995

This paper shows adaptive control using RHPC(Receding Horizon Predictive Control) with equality constraint which applied to Electric Furnace. The control strategy includes monotonic weighting (improving transient response) and pre-filtering (enhancing robustness), which is effective on real process. We can observe the performance of RHPC and confirm the practical aspect of RHPC with unmodelled dynamics through the experiment of Electric Furnace. Finally, this paper verifies the feasibility of RHPC to real process.

• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.134-140
• /
• 2017

A well-performed core power control to track load changes is crucial in pressurized water reactor (PWR) nuclear power stations. It is challenging to keep the core power stable at the desired value within acceptable error bands for the safety demands of the PWR due to the sensitivity of nuclear reactors. In this paper, a state-space model predictive control (MPC) method was applied to the control of the core power. The model for core power control was based on mathematical models of the reactor core, the MPC model, and quadratic programming (QP). The mathematical models of the reactor core were based on neutron dynamic models, thermal hydraulic models, and reactivity models. The MPC model was presented in state-space model form, and QP was introduced for optimization solution under system constraints. Simulations of the proposed state-space MPC control system in PWR were designed for control performance analysis, and the simulation results manifest the effectiveness and the good performance of the proposed control method for core power control.

• 제어로봇시스템학회논문지
• /
• 제20권9호
• /
• pp.900-907
• /
• 2014

This paper proposes a MPC (Model Predictive Control) method for the torque and flux controls of induction motor. The proposed MPC method selects the optimized voltage vector for the matrix converter control using the predictive modeling equation of the induction motor and cost function. Hence, the reference voltage vector that minimizes the cost function of the torque and flux error within the control period is selected and applied to the actual system. As a result, it is possible to perform the torque and flux control of induction motor using only the MPC controller without a PI (Proportional-Integral) or hysteresis controller. Even though the proposed control algorithm is more complicated and has lots of computations compared with the conventional MPC, it can perform torque ripple reduction by synthesizing voltage vectors of various magnitude. This feature provides the reduction of amount of calculations and the improvement of the control performance through the adjustment of the number of the unit vectors n. The proposed control method is validated through the PSIM simulation.

• Journal of Power Electronics
• /
• 제18권6호
• /
• pp.1791-1804
• /
• 2018

To achieve a fast dynamic response and to solve the multi-objective control problems of the output currents, capacitor voltages and system constraints, this paper proposes a deadbeat and hierarchical predictive control with space-vector modulation (DB-HPC-SVM) for five-level nested neutral point piloted (NNPP) converters. First, deadbeat control (DBC) is adopted to track the reference currents by calculating the deadbeat reference voltage vector (DB-RVV). After that, all of the candidate switching sequences that synthesize the DB-RVV are obtained by using the fast SVM principle. Furthermore, according to the redundancies of the switch combination and switching sequence, a hierarchical model predictive control (MPC) is presented to select the optimal switch combination (OSC) and optimal switching sequence (OSS). The proposed DB-HPC-SVM maintains the advantages of DBC and SVM, such as fast dynamic response, zero steady-state error and fixed switching frequency, and combines the characteristics of MPC, such as multi-objective control and simple inclusion of constraints. Finally, comparative simulation and experimental results of a five-level NNPP converter verify the correctness of the proposed DB-HPC-SVM.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1996년도 추계학술대회 학술발표 논문집
• /
• pp.285-289
• /
• 1996

Fuzzy logic controllers have been shown better performance than conventional ones especially in highly nonlinear plants. These results are caused by the nonlinear fuzzy rules were not sufficient to cope with significant uncertainty of the plants and environment. Moreover, it is hard to make fuzzy rules consistent and complete. In this paper, we employed a predictive neural network to enhance the nonlinear inference capability. The predictive neural network generates predictive outputs of a controlled plant using the current and past outputs and current inputs. These predictive outputs are used in terms of fuzzy rules in fuzzy inferencing. From experiments, we found that the predictive term of fuzzy rules enhanced the inference capability of the controller. This predictive neural network can also help the controller cope with uncertainty of plants or environment by on-line learning.