• Journal of the Korean Society of Safety
• /
• v.31 no.1
• /
• pp.66-73
• /
• 2016

Lyocell fibers were used as a precursor in order to improve yield and strength of cellulose-based precursor while manufacturing activated carbon fiber(ACF). Lyocell fibers as a precursor for the preparation of ACF were surface-modified by reaction with 3-aminopropyltriethoxysilane(APTES) and pre-treated with KOH and H3PO4. Using aforementioned precursor, ACFs were prepared by a series of stabilization, carbonization and activation process at high temperatures. On each process, FT-IR, TGA, UTM and SEM were used to observe fibers' physical properties including structure and porous surfaces. FT-IR results proved that surface modification was achieved during stabilization, carbonization and activation process. TGA results during carbonization process found that surface modified fibers with APTES 0.02 mol(A2) showed higher thermostability, and extended pre-treatment increased yield. Especially, yield was found to have an increase of 10~20 wt% with surface modification during activation process. UTM results showed that tensile strength has the same order of concentration of APTES after surface modification, however, was found to show lower tensile strength than lyocell fibers after stabilization process. SEM results revealed that more homogeneous porosity control could be proceed after modifying the surface for the effective removal of hazardous substances.

• Journal of the Korean Society of Safety
• /
• v.24 no.3
• /
• pp.13-18
• /
• 2009

This paper is purposed to develop DAQ H/W, S/W and DB which can be used in developing electrical fire alarm system or in analyzing electrical fire cause, by detecting and monitoring precursor signals which have high possibility leading to electrical fire on electrical distribution wires. In this paper, developed was DAQ H/W adopting the C8051FXXX CPU which can analyze the measurement signals of current and voltage in electrical distribution wires, other CPU was investigated in view of the best digital sampling rate on the basis of previous researches for electrical fire alarm system. Also, the S/W which can interface with DAQ H/W's communication protocol and can be applied for electrical fire causes analysis, are embodied by LabVIEW. The combined DAQ H/W and S/W could analyze efficiently normal as well as abnormal electrical signals such as RMS value, instantaneous value of current and voltage, frequency signals etc, on the electrical wires. Also, DB system was constructed for recording various analysis results for precursor signals including voltage and current signals. The results by simulator and experiment showed that the suggested scheme with DAQ H/W, S/W and DB in this paper has high usability.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.381.2-381.2
• /
• 2014

In this study the amorphous carbon films were deposited by PECVD at the substrate temperature range of 250 to $600^{\circ}C$, and the process conditions of higher and lower precursor flow rate, respectively. The temperature was a main parameter to control the density and mirco-structures of carbon films, and their's properties depended with the process temperatrue are changed by controlling precursor flow rate. The precursor feeding rate affect on the plasma ion density and a deposition reactivity. This change of film properties was obtained the instrinsic stress, FT-IR & Raman analysis, refractive index (RI) and ext. coef. (k) measured by ellipsometer. In the process conditions of lower and higher flow rate of precursor it had a different intrinsic stress as a function of the substrate temperature.

• Korean Journal of Microbiology
• /
• v.36 no.1
• /
• pp.14-19
• /
• 2000

Algal lytic enzyme, an extracellular enzyme, was purified from the culture filtrate of Penicillium oxalicum(HCLF-34) by ultrafiltration, gel filtration chromatography, and anion exchange chromatography. The enzyme has a molecular mass of approximately 22 kDa, an it is a monomer by renaturation SDS-PAGE. The amino acid sequences of the enzyme was revealed to be NH2-Glu-Ser-Tyr-Ser-Ser-Asn-Ala-Ala-Gly-Ala-Val-Leu-Ile---, had about 84% identity with the mature light chain of aspergillopepsin II precursor and 81% identity with the mature protein of the acid proteinase EapC precursor.

• Korean Journal of Materials Research
• /
• v.25 no.5
• /
• pp.247-252
• /
• 2015

The effect of precursor concentration on the structural, morphological, and optical properties of $TiO_2$nano-flowers was investigated in this study. An increase in crystallite size was observed with an increase in the concentration of the precursor (titanium butoxide). The FE-SEM micrographs of the as-prepared samples show a three-dimensional flower-like morphology. The flowers consist of several nanorods coming out of a single core and have very sharp edges. Also, the variation in the aspect ratio of the nanostructure was observed with the concentration of the precursor. The photocatalytic properties of the samples show that the sample that has a high aspect ratio (AR~9) has a much better photocatalytic activity compared to the nano-crystal with a low aspect ratio (AR~6.1). It is believed that the excellent photocatalytic performance and short time synthesis of $TiO_2$nano-flowers using the microwave hydrothermal method can have potential applications in the field of photocatalysis.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.11
• /
• pp.1014-1019
• /
• 2006

The influence of the number of solution coatings on the densification of the PZT thick films was studied. PZT powder and PZT precursor solution was prepared by a sol-gel method and PZT thick films were fabricated by the screen-printing method on the alumina substrates. The powder and solution of composition were (A) PZT(80/20)/PZT(20/80), (B) PZT(70/30)/PZT(30/70) and (C) PZT(60/40)/PZT(40/60), (D) PZT(52/48)/PT. The coating and drying procedure was repeated 4 times. And then the PZT precursor solution was spin-coated on the PZT thick films. A concentration of a coating solution was 0.5 moth and the number of coating was repeated from 0 to 6. The porosity of the thick films was decreased with increasing the number of coatings and the PZT thick films with 6-times coated showed the dense microstructure and thickness of about $60{\mu}m$. A grain size was increased with increasing the coating number. All PZT thick films showed the typical XRD patterns of a typical perovskite polycrystalline structure. The relative dielectric constant of PZT thick films was improved 30-100% as the number of coatings.

• Korean Journal of Materials Research
• /
• v.18 no.6
• /
• pp.294-297
• /
• 2008

In this paper, a novel non-vacuum technique is described for the fabrication of a $CuInSe_2$ (CIS) absorber layer for thin film solar cells using a low-cost precursor solution. A solution containing Cu- and Inrelated chemicals was coated onto a Mo/glass substrate using the Doctor blade method and the precursor layer was then selenized in an evaporation chamber. The precursor layer was found to be composed of CuCl crystals and amorphous In compound, which were completely converted to chalcopyrite CIS phase by the selenization process. Morphological, crystallographic and compositional analyses were performed at each step of the fabrication process by SEM, XRD and EDS, respectively.

• Journal of Plant Biology
• /
• v.32 no.1
• /
• pp.51-65
• /
• 1989

Glycinin is the major storage protein in soybean. It has been known that a molecule of glycinin is composed of 6 subunits, each of which consists of two different kinds of polypeptides, acidic (A) and basic (B) one (NW 39K and 19K, respectively). To study the molecular origin and the relationship of glycinin subunit polypeptides, antibodies against A-and B-polypeptide were obtained by immunizing rabbits with either of the antigens purified by gel filtration and preparative electrophoresis. Each antibody was not only specific for its own antigen polypeptide in soybeans but also recoginzed the precursor which was synthesized in vivo and in vitro. The polyadenylated mRNAs were isolated from immature seeds and leaves and were translated in vitro using wheat germ extract. One of the seed-specific translation products. MW 60K, was identified to be the precursor of glycinin subunit by immunoprecipitation with antibodies against glycinin A- and B-polypeptide. Mature A- and B-polypeptides were not detected in the translte in vitro. These results suggest that the precursor polypeptide is synthesized from the mRNA and is cleaved to yield A- and B-polypeptides which from a glycinin subunit in the cell. Glycinin genes were expressed with the maturation of soybean seeds in a tissue-specific and developmental stage-specific manner.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.9
• /
• pp.1457-1462
• /
• 2007

A simple and facile sonochemical route was described for the fabrication of diameter-controlled ZnO nanorod arrays on Si wafers. The diameter of ZnO nanorods was controlled by the concentration of zinc cations and hydroxyl anions in aqueous precursor solution. At high concentration of the precursor solution, thick ZnO nanorod arrays were formed. On the contrary, thin ZnO nanorod arrays were formed at low concentration of the precursor solution. The average diameter of ZnO nanorods varies from 40 to 200 nm. ZnO nanorod arrays with sharp tip were also fabricated by the step-by-step decrease in precursor solution concentration. The crystal structure and optical characteristics of ZnO nanorods were investigated by transmission electron microscopy, X-ray diffraction, and photoluminescence spectroscopy. Growth mechanism of ZnO nanorod arrays was also proposed.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.4
• /
• pp.35-39
• /
• 2008

We studied deposition of low-k SiOCH dielectric film by PECVD. DEMS(diethoxymethlysilane) precursor, which has two ethoxy groups along with one methyl group attached to the silicon atoms, was used as precursor. The SiOCH film was deposited as a function of oxygen flow rates ranging from 0 to 100sccm. The deposition rate($\AA$/min) of SiOCH film was increased due to the increase of oxygen radical as a function of $O_2$ flow rates. The dielectric constant was decreased from 3.0 to 2.77, as the film was annealed at $450^{\circ}C$ for 30 min. So, it could account that the dielectric constant changes sensitively with $O_2$ flow rates. Also, the leakage current of the annealed film exhibited stable curve than that of asdeposited. These results were caused by the increase of Si-O-Si group and decrease of Si-CH group and OH group within the film by annealing.