• Health Policy and Management
• /
• v.10 no.3
• /
• pp.50-67
• /
• 2000

This study aims to estimate the consumption of antibiotics in Korea and to suggest the further studies. To measure the amount of antibiotics consumption, we referred to the statistic of NFHI(National Federation of Health Insurance) and a private institute of pharmaceutical information(Korea Intercontinental Medical Statistics; IMS Korea). There were 1,563 antibiotics produced in Korea in 1997. The total amount of antibiotics production was 1,197 billion won in 1997. Antibiotics accounted for 17.6% of the total pharmaceutical productions in 1997. Cephalosporins have taken the largest part of antibiotics production since 1992. The estimation using NFHI data showed that the total expenditure of antibiotics used in health facilities was 268 billion won, 608 billion won, 911 billion won in 1990, 1994, 1997 respectively. Tertiary hospitals spent 246 billion won, general hospitals 287 billion won, hospitals 78 billion won, clinics 300 billion won in 1997. The amount of expenditure and the intensity of antibiotics consumption in hospitals have increased more steeply than any other health facilities. The total expenditure of antibiotics consumption in health facilities and pharmacies was 778 billion won when estimated using the data from IMS Korea, and 999 billion won from NFHI. Cephalosporins was the fast growing antibiotics group in all of the market- hospitals, clinics, pharmacies since 1991. To measure the amount and patterns of antibiotics consumption more precisely, a pharmaceutical monitoring or surveillance system is needed.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.47
• /
• pp.3-24
• /
• 2010

The contours of the definition of an indirect expropriation are not precisely drawn. In some recent ICSID decision, tribunals have interpreted the concept of indirect expropriation narrowly and have preferred to find a violation of the standard of fair and equitable treatment. Thus, I analyzed the three Requirements of Indirect Expropriation basis of ICSID Cases as below. First, the effect of measure upon the economic benefit value as well as upon the control over the investment will be the key question when it comes to deciding whether an indirect expropriation has taken place. Whenever this effect is substantial and lasts for a significant period of time, it will be assumed prima facie that a taking of the property has occurred. Second, legitimate play a key role in the interpretation of the fair and equitable treatment standard. But they also found entry into the law governing indirect expropriation. Finally, the duration of a government measure affecting the interests of a foreign investor is important for the assessment of whether an expropriation has occurred.

• Journal of Navigation and Port Research
• /
• v.35 no.2
• /
• pp.121-130
• /
• 2011

The localization of vehicle is an important part of an unmanned vehicle control problem. Pseudolite ultrasonic system(PUS) is the method to find an absolute position with a high accuracy by using ultrasonic sensor. And Gyro is the inertial sensor to measure yaw angle of vehicle. PUS can be able to estimate the position of mobile robot precisely, in which errors are not accumulated. And Gyro is a more faster measure method than PUS. In this paper, we suggest a more accuracy method of calculating PUS which is numerical analysis approach named Newtonian method. And also propose the fusion method to increase the accuracy of estimated angle on moving vehicle by using PUS and Gyro integrated system by Kalman filtering. To control the 4WS unmanned vehicle, the trajectory following algorithm is suggested. And the new concept arbitration of goal controller is suggested. This method considers the desirability function of vehicle state. Finally, the performances of Newtonian method and designed controller were verified from the experimental results with the 4WS vehicle scaled 1/10.

• Journal of Drive and Control
• /
• v.18 no.2
• /
• pp.9-19
• /
• 2021

The spool displacement signal of a directional control valve, including the servo valve, can be considered as the standard signal to measure dynamic characteristics. When the spool displacement signal is not available, the velocity signal of a metering cylinder piston can be used. In this study, the frequency response characteristics of the metering cylinder are investigated for the spool displacement input. The transfer functions of the servo valve-metering system are derived taking into consideration the oil inertia effect in the transmission lines. The theoretical results of the transfer functions are verified through computer simulations and experiments. The oil inertia effect in the transmission lines was found to have a very significant effect on the bandwidth frequency of the servo valve-metering cylinder system. In order to more precisely measure the dynamic characteristics of a servo valve, the metering cylinder should be set up to minimize the oil inertia effect by increasing the inner diameters of the transmission lines or shortening their lengths.

• Applied Microscopy
• /
• v.52
• /
• pp.1.1-1.8
• /
• 2022

As semiconductor device architecture develops, from planar field-effect transistors (FET) to FinFET and gate-all-around (GAA), there is an increased need to measure 3D structure sidewalls precisely. Here, we present a 3-Dimensional Atomic Force Microscope (3D-AFM), a powerful 3D metrology tool to measure the sidewall roughness (SWR) of vertical and undercut structures. First, we measured three different dies repeatedly to calculate reproducibility in die level. Reproducible results were derived with a relative standard deviation under 2%. Second, we measured 13 different dies, including the center and edge of the wafer, to analyze SWR distribution in wafer level and reliable results were measured. All analysis was performed using a novel algorithm, including auto fattening, sidewall detection, and SWR calculation. In addition, SWR automatic analysis software was implemented to reduce analysis time and to provide standard analysis. The results suggest that our 3D-AFM, based on the tilted Z scanner, will enable an advanced methodology for automated 3D measurement and analysis.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.10
• /
• pp.956-961
• /
• 2007

We propose a new distance measurement method and local positioning system for the autonomous mobile robots localization. The distance measurement method is able to measure long-range distances with a high accuracy by using ultrasonic sensors. The time of flight of the ultrasonic waves include various noises is calculated accurately by the proposed period detecting method. The proposed local positioning system is composed of four ultrasonic transmitters and one ultrasonic receiver. The ultrasonic transmitter and receiver are separated but they are synchronized by RF (Radio frequency) signal. The proposed system using ultrasonic waves is represented as USAT(Ultrasonic Satellite System). USAT is able to estimate the position using the least square estimation. The experimental results show that the proposed local positioning system enables to estimate the absolute position precisely.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.318-321
• /
• 2003

In order to generate the extrusion die surface of non-symmetric H- and U-shaped sections, an automatic surface construction method based on B-spline surface and scalar field theory is proposed in this study. The isothermal lines and stream lines designed in the scalar field are introduced to find the control points which are used in constructing B-spline surfaces. Intersected points between the isothermal lines and stream lines are used to construct B-spline surfaces. The inlet and outlet profiles are precisely described with B-spline curves by using the centripetal method for uniform parameterization. The extrusion die surface is generated by using the cubic curve interpolation in the u- and v-directions. A quantitative measure for the control of surface is suggested by introducing the tangential vectors at the inlet and outlet sections.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.10a
• /
• pp.197-200
• /
• 2003

An automatic surface construction method based on B-spline surface and scalar field theory is proposed to generate the extrusion die surface of complicated sections in this paper. The isothermal lines and stream lines designed in the scalar field are introduced to find the control points which are used in constructing B-spline surfaces. Intersected points between the isothermal lines and stream lines are used to construct B-spline surfaces. The inlet and outlet profiles are precisely described with B-spline curves by using the centripetal method for uniform parameterization. The extrusion die surface is generated by using the cubic curve interpolation in the u- and v-directions. A quantitative measure for the control of surface is suggested by introducing the tangential vectors at the inlet and outlet sections.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.211-214
• /
• 2001

Electronic Speckle Pattern Interferometry(ESPI) is one of optical technique to measure displacement precisely, uses CCD camera to show result image in real time. General ESPI system measures in-plane or out-of-plane displacement. Shearography is one of electronic speckle pattern interferometric methods which allow full-field observation of surface displacement derivatives and it is robust in vibration. The shearography provides non-contacting technique of evaluating defects nondestructively. In this study, the shearography was used to evaluate defects in Carbon Fiber Reinforced Plastic(CFRP). Various sizes of artificial defects were embedded in various depths of woven CFRP plate. Effects due to the variation of size and depth of defects were evaluated in this study.

• Journal of Information Technology Applications and Management
• /
• v.22 no.3
• /
• pp.1-18
• /
• 2015

Financial markets are characterized by large numbers of complex and interacting factors which are ill-understood and frequently difficult to measure. Mathematical models developed in finance are precise formulations of theories of how these factors interact to produce the market value of financial asset. While these models are quite good at predicting these market values, because these forces and their interactions are not precisely understood, the model value nevertheless deviates to some extent from the observable market value. In this paper we propose a framework for augmenting the predictive capabilities of mathematical model with a learning component which is primed with an initial set of historical data and then adjusts its behavior after the event of prediction.