• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 춘계학술대회 논문집
• /
• pp.835-841
• /
• 2013

Modern solid-state gyroscopes (HRG) with hemispherical resonators from high-purity quartz glass and special surface superfinishing and ultrathin gold coating become the best instruments for precise-grade inertial reference units (IRU) targeting long-term space missions. Designing of these sensors could be a notable contribution into development of Korea as a space nation. In participial, 40mm diameter thin-shell resonator from high-purity fused quartz, fabricated as a single-piece with its supporting stem has been designed, machined, etched, tuned, tested, and delivered by STM Co. (ATS of Ukraine) several years ago; an extremely-high Q-factor (upto 10~20 millions) has been shown. Understanding of the best way how to match such a unique sensor with inner glass assembly of the gyro means how to use the high potential in a maximal extent; and this has become the urgent task. Inner quartz glass assembly has a very thin indium (In) layer soldered the resonator and its silica base (case), but effects of internal resonances between operational modal pair of the shell-cup and its side (parasitic) modes can notable degrade the potential of the sensor as a whole, instead of so low level of resonator's intrinsic losses. Unfortunately, there are special combinations of dimensions of the parts (so-called, "resonant sizes"), when intensive losses of energy occurs. The authors proposed to use the length of stem's fixture as an additional design parameter to avoid such cases. So-called, a cyclic scheme of finite element method (FEM) and ANSYS software were employed to estimate different combinations of gyro assembly parameters. This variant has no mismatches of numerical origin due to FEM's discrete mesh. The optimum length and dangerous "resonant lengths" have been found. The special attention has been paid to analyses of 3D effects in a cup-stem transient zone, including determination of a difference between the positions of geometrical Pole of the resonant hemisphere and of its "dynamical Pole", i.e., its real zone of oscillation node. Boundary effects between the shell (cup) and 3D short "beams" (inner and outer stems) have been ranged. The results of the numerical experiments have been compared with the classic model of a quasi-hemispherical shell band with inextensional midsurface, and the solution using Rayleigh's functions of the $1^{st}$ and $2^{nd}$ kinds. To guarantee the truth of the recommended sizes to a designer of the real device, the analytical and FEM results have been compared with experimental data for a party of real resonators. The consistency of the results obtained by different means has been shown with errors less than 5%. The results notably differ from the data published earlier by different researchers.

• 사상체질의학회지
• /
• 제19권2호
• /
• pp.22-29
• /
• 2007

1. Objectives Sasang Contitutional Medicine, a part of the traditional Korean medical lore, treats illness through a constitutional typing system that categorizespeople into four constitutional types. A few of the important criteria for differentiating the constitutional types are external appearances, inner state of mind, and pathological patterns. We had been developing a 3D Automatic Face Recognition Apparatus (3D-AFRA) in order to evaluate the external appearances with more objectivity. This apparatus provides a 3D image and numerical data on facial configuration, and this study aims to evaluate the mechanical accuracy of the 3D-AFRA hardware. 2. Methods Several objects of different shapes (cube, cylinder, cone, pyramid) were each scanned 10 times using the 3D Automatic Face Recognition Apparatus (3D-AFRA). The results were then compared and analyzed with data retrieved through a laser scanner known for its high accuracy. The error rates were analyzed for each grid point of facial contour scanned with Rapidform2006 (Rapidform2006 is a 3D scanning software that collects grid point data for contours of various products and products and product parts through 3D scanners and other 3D measuring devices; the grid point data thusly acquired is then used to reconstruct highly precise polygon and curvature models). 3. Results and Conclusions The average error rate was 0.22mm for the cube, 0.22mm for the cylinder, 0.125mm for the cone, and 0.172mm for the pyramid. The visual data comparing error rates for measurement figures retrieved with Rapidform2006 is shown in $Fig.3{\sim}Fig.6$. Blue tendency indicates smaller error rates, while red indicates greater error rates The protruding corners of the cube display red, indicating greater error rates. The cylinder shows greater error rates on the edges. The pyramid displays greater error rates on the base surface and around the vertex. The cone also shows greater error around the protruding edge.

• 구강회복응용과학지
• /
• 제16권2호
• /
• pp.133-147
• /
• 2000

A well-planned, precise occlusal adjustment of natural teeth has some distinct advantages over other forms of occlusal therapy. It should be emphasized, however, that an occlusal adjustment is an irreversible procedure and has definite contraindications in some mouths. Generally, the treatment methods for the patients that has open-bite will be following as below. : (1) Use of removable orthopedic repositioning appliance, (2) Orthodontics, (3) Full or partial reconstruction of the dentition, (4) Orthognathic surgical procedure, (5) Occlusal adjustment of the existing natural teeth, (6) Any combination of the above. Above all, the advantages of occlusal adjustment of natural teeth are : (1) the patient is more able to adapt to the changes in jaw position and posture; (2) the phonetic or speaking ability of the patient is not significantly changed and usually is improved; (3) the esthetics of the natural teeth is not altered and often is better; (4) the hygiene of the individual teeth is easily maintained; and (5) the functional usage of the teeth as cutting and chewing devices is markedly improved. The objective of an occlusal adjustment, as with any form of occlusal therapy, is to correct or remove the occlusal interferences, or premature contacts, on the occluding parts of the teeth which prevent a centric relation closure of the mandible. A systematic, disciplined approach can be followed in treatment, the objectives should be listed. They are : (1) Centric relation occlusion of the posterior teeth. (2) Proper "coupling" of the anterior teeth. (3) An acceptable disclusive angle of the anterior teeth in harmony with the condylar movement patterns. (4) Stability of the corrected occlusion. (5) Resolution of the related symptoms. For the patient with open-bite on anterior and posterior teeth, this case report shows the treatment methods in combination the fixed prosthesis with the selective cutting of the natural teeth. Occlusal adjustment is no longer an elective procedure but a mandatory one for patients requiring restorations and those in treatment for TMD dysfunctions or those whose dentitions show signs of occlusal trauma. Occlusal adjustment is essential for all who do not display the above lists.

• Journal of Ginseng Research
• /
• 제3권1호
• /
• pp.66-93
• /
• 1979

Panax ginseng C. A. Meyer, which has been known for more than EWO years. occupies a Particular prince in folk medicine as so called tonic remedy. The pharmacolgical investigations of ginseng, based on the scientific concepts and methodology, have been performed by many researchers through the past 50∼60 years at different parts of the world. The pharmacological action of Panax ginseng compiled from the numerous reports can be summarized as follows: 1. On central nervous system, the effect of Panax ginseng is timulatory in smaller doses and somewhat depressive in larger doses. From the psychopharmacological aspect, ginseng seems to increase the mental efficiency of man. 2. Ginseng has the effect tending to Protect organism from various physical and chemical stresses. 3. The growth and basal metabolic rates of experimental animals are stimulated by ginseng. Ginseng also prolongs the survival time of animals under adverse influences. 4. Increasing the physical and mental efficiency, ginseng postpones the onset of fatigue and increases the working capacities. 5. In the case of the intravenous administration of ginseng, a transitory and slight hypotensive effect is observed. These hypotensive effects seems to include that of a direct action and actions related to the release of histamine and/or serotonin by ginseng. 6. It is Presumed that ginseng lowers the elevated bleed ingar and cholesterol level. 7. Ginseng tends to increase the gastrointestinal motizity and tone 8. It is presumed that ginseng Promotes the iron metabolism and activates the hematopoietic factors. 9. Ginseng tends to stimulate the biosynthesis of nucleic acid and release of histamine and serotonin. 10. The toxicity end adverse reactions of ginseng appear to be nothing that warrants apprehension. 11. Anticancer erects of ginseng seem to be due to indirect action rather than direct action on cancer cell, by improving the host condition 12. Recent clinical trials of ginseng harts obtained sent good results, but Present trial is still limited in its range, so it is necessary to broaden the scope of trial covering many kinds of organs and diseases. From the above, although it appears that substantial advancements have been achieved in the studies on the Pharmacological actions of Panax ginseng there are many discrepancies noticed in the reported data. Furthermore the precise mechanisms of actions of ginseng are sometimes obscure, even unknown in other actions as the students stand now. The main reasons for this are considered to be that even though saponin has been identified at one of the active substances of ginseng, other components have not fully been identified and that the experimental approaches of the investigations varied with different researchers. Thus a thorough analysis of the chemical components and newer standardized concepts and metohds appear to be the pre-requisites for further study of the pharmacolgical effects and mechaisms of Panax ginseng.

• 한국수소및신에너지학회논문집
• /
• 제24권1호
• /
• pp.44-49
• /
• 2013

Hydrogen penetration into a metal leads to damages and mechanical degradations and its content measurement is of importance. For a precise measurement, a sample preparation procedure must be optimized through a series of studies on sample washing and drying. In this study, two-step washing with organic solvents and thermal soaking in inert gas were tried with a rod-shaped, API X65 steel sample. The samples were machined from a steel plate and then washed in acetone and etyl-alcohol for 5 minute each and dried with compressed air. After then, the samples were thermally soaked in a home-made nitrogen gas chamber during 10 minute at different heat gun temperatures from 100 to $400^{\circ}C$ and corresponding temperature range in the soaking chamber was from 77 to $266^{\circ}C$ according to the temperature calibration. Hydrogen residue in the samples was measured with a hot extraction system after each soaking step; hydrogen residue of $0.70{\pm}0.12$ wppm after the thermal soaking at $77^{\circ}C$ decayed with increase of the soaking temperature. By adopting the heat transfer model, decay behavior of the hydrogen residue was fitted into an exponential decay function of the soaking temperature. Saturated value or lower bound of the hydrogen residue was 0.36 wppm and chamber temperature required to lower the hydrogen residue about 95% of the lower bound was $360^{\circ}C$. Furthermore, a thermal desorption spectroscopy was done for the fully soaked samples at $360^{\circ}C$. Weak hydrogen peak was observed for whole temperature range and it means that hydrogen-related contaminants of the sample surface are steadily removed by heating. In addition, a broad peak found around $400^{\circ}C$ means that parts of the hydrogen residue are irreversibly trapped in the steel microstructure.

• 한국유변학회:학술대회논문집
• /
• 한국유변학회 2006년도 춘계 학술발표회 논문집
• /
• pp.81-84
• /
• 2006

Slot coating process, in continuous and patch modes, has been applied for the many precise coating products, e.g., flat panel displays and second batteries. However, manufacturing uniform coating products is not a trivial task at high-speed operations because various flow instabilities or defects such as leaking, bubbles, ribbing, and rivulets are frequently observed in this process. It is no wonder, therefore, that many efforts to understand the various aspects of dynamics and coating windows of this process have been made both in academia and industry. In this study, as the first topic, flow dynamics within the coating bead in slot coating process has been investigated using the one-dimensional viscocapillary model by lubrication approximation and two-dimensional model by Flow-3D software. Especially, operability windows in both 1D and 2D cases with various slot die lip designs have been successfully portrayed. Also, effects of process conditions like viscosity and coating gap size on slot coating window have been analyzed. Also, some experiments to find minimum coating thickness and coating windows have been conducted using slot die coater implemented with flow visualization device, corroborating the numerical results. As the second topic, flow dynamics of both Newtonian and Non-Newtonian fluids in patch or pattern slot coating process, which is employed in manufacturing IT products such as secondary batteries, has been investigated for the purpose of optimal process designs. As a matter of fact, the flow control in this system is more difficult than in continuous case because od its transient or time-dependent nature. The internal die and die lip designs for patterned uniform coating products have been obtained by controlling flow behaviors of coating liquids issuing from slot. Numerical simulations have been performed using Fluent and Flow-3D packages. Flow behavior and pressure distribution inside the slot die has been compared with various die internal shapes and geometries. In the coating bead region, efforts to reduce irregular coating defects in head and tail parts of one patterned coating unit have been tried by changing die lip shapes. It has been concluded that optimal die internal design gas been developed, guaranteeing uniform velocity distribution of both Newtonian and shear thinning fluids at the die exit. And also optimal die lip design has been established, providing the longer uniform coating layer thickness within one coating unit.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권5호
• /
• pp.30-42
• /
• 2022

최근, 국내의 도심지와 수도권을 잇는 급행철도 사업, 간선도로 및 고속도로의 지중화 사업 등과 같이 교통 인프라 건설이 활발하게 추진되고 있으며 국토의 효율적인 활용을 위하여 지하 터널 및 산 터널의 시공이 활발해지고 있다. 터널 시공이 늘어남에 따라 콘크리트 구조물의 노후화로 인한 안전진단, 유지보수 및 관리의 필요성도 증대되고 있다. 본 논문에서는 인력에 의한 외관조사의 단점을 해결하고 터널 안전점검의 자동화를 위하여 터널 스캐닝영상을 통한 안전점검을 제시한다. 터널 스캐닝영상을 통한 안전점검은 기존 인력에 의한 외관조사에 비해 조사기간과 인력을 크게 줄일 수 있으며 조사자의 안전사고와 교통체증에 따른 사회적 비용을 절감할 수 있다는 장점이 있다. 터널 스캐닝영상 기반 안전점검을 위해서는 터널 스캐닝영상의 접합을 통하여 평면전개 이미지를 생성하는 것이 핵심이다. 본 연구에서는 터널 스캐닝영상 기반 안전점검의 필수기술인 터널 스캐닝 다중 촬영 영상 접합에 적합한 알고리즘에 대한 성능평가를 진행하였다. 터널이미지 접합에 유리한 알고리즘을 찾기 위하여 OpenCV에서 제공하는 특징점 검출 및 매칭 알고리즘 중 실수기술자와 높은 정확도를 갖는 SIFT, 이진기술자를 갖고 연산속도가 빠른 ORB, BRISK 총 3가지 알고리즘을 비교 분석하고자 한다. 터널이미지는 크게 콘크리트부, 조명부와 타일부로 나누어 터널이미지의 특성을 반영하였다. 터널이미지 접합에 유리한 알고리즘은 특징점 검출 개수, 연산속도, 특징점 매칭의 정확성, 영상접합 결과를 종합하여 판별하였다. 접합성능은 SIFT알고리즘이 가장 좋았으며 ORB, BRISK도 짧은 연산시간과 준수한 성능을 보였다. 연산시간보다 정확도가 중요시되는 정밀한 평면전개 이미지 생성에 SIFT가 활용될 수 있고 ORB와 BRISK도 준수한 접합결과를 보여줘 대용량 영상에서 빠른 영상처리 속도가 요구되는 작업이 필요할 경우 사용될 수 있는 가능성을 확인했다.

• 한국콘텐츠학회논문지
• /
• 제22권2호
• /
• pp.125-134
• /
• 2022

스마트폰 기술의 발전으로 인하여 2020년 기준 전 국민의 91.9%가 인터넷 이용[1]하여 수시로 홈페이지와 모바일 앱을 통해 정보를 습득하고 있다. 정보제공을 담당하는 홈페이지의 수가 점점 늘어남에 따라 홈페이지의 안전성을 진단하는 웹취약점 진단 신청수도 매년마다 증가하고 있는 상황이다. 기존 웹취약점 점검은 진단원이 수작업으로 홈페이지를 모의 해킹하여 취약점을 진단했기 때문에 진단대상 홈페이지 수에 비례하여 진단인력이 늘어나야한다. 하지만 현실적으로 웹취약점 진단인력 확보에 한계가 있고, 진단인력을 늘렸을 경우 많은 비용이 발생한다. 이러한 문제점 해결을 위해 자동진단 도구를 사용하여 수동진단의 일부를 대체하고 있다. 본 논문에서는 현재의 자동진단 범위를 확대하기 위한 방안을 새롭게 제안하였다. 즉, 웹취약점 진단항목의 영향도를 분석하여 자동진단 가능 항목을 도출하고, 실제 운영 중인 홈페이지에 수동 및 자동진단을 수행하여 진단결과에 대한 비교 분석을 통해 자동진단 가능항목을 파악하였다. 또한 자동진단 개선방안을 제시하여 자동진단 도구 개선을 통해 모든 취약점 항목은 아니지만 가능한 항목에 대해서 수동진단을 대체할 수 있다. 이를 통해서 진단 및 정밀진단이 필요한 부분에 집중하여 안전한 홈페이지 운영환경 조성에 기여할 수 있을 것이다.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4571-4584
• /
• 2022

The analysis of rapid flow transients in Reactor Coolant Pumps (RCP) is essential for a reactor safety study. An accurate and precise analysis of the RCP coastdown is necessary for the reactor design. The coastdown of RCP affects the coolant temperature and the colloidal crud in the primary coolant. A realistic and kinetic model has been used to investigate the behavior of activated colloidal crud in the primary coolant and steam generator that solves the pump speed analytically. The analytic solution of the non-dimensional flow rate has been determined by the energy ratio β. The kinetic energy of the coolant fluid and the kinetic energy stored in the rotating parts of a pump are two essential parameters in the form of β. Under normal operation, the pump's speed and moment of inertia are constant. However, in a coastdown situation, kinetic damping in the interval has been implemented. A dynamic model ACCP-SMART has been developed for System Integrated Modular and Advanced Reactor (SMART) to investigate the corrosion due to activated colloidal crud. The Fickian diffusion model has been implemented as the reference corrosion model for the constituent component of the primary loop of the SMART reactor. The activated colloidal crud activity in the primary coolant and steam generator of the SMART reactor has been studied for different equilibrium corrosion rates, linear increase in corrosion rate, and dynamic RCP coastdown situation energy ratio b. The coolant specific activity of SMART reactor equilibrium corrosion (4.0 mg s^-1) has been found 9.63×10^-3 µCi cm^-3, 3.53×10^-3 µC cm^-3, 2.39×10^-2 µC cm^-3, 8.10×10^-3 µC cm^-3, 6.77× 10^-3 µC cm^-3, 4.95×10^-4 µC cm^-3, 1.19×10^-3 µC cm^-3, and 7.87×10^-4 µC cm^-3 for ²⁴Na, ⁵⁴Mn, ⁵⁶Mn, ⁵⁹Fe, ⁵⁸Co, ⁶⁰Co, ⁹⁹Mo, and ⁵¹Cr which are 14.95%, 5.48%, 37.08%, 12.57%, 10.51%, 0.77%, 18.50%, and 0.12% respectively. For linear and exponential coastdown with a constant corrosion rate, the total coolant and steam generator activity approaches a higher saturation value than the normal values. The coolant and steam generator activity changes considerably with kinetic corrosion rate, equilibrium corrosion, growth of corrosion rate (ΔC/Δt), and RCP coastdown situations. The effect of the RCP coastdown on the specific activity of the steam generators is smeared by linearly rising corrosion rates, equilibrium corrosion, and rapid coasting down of the RCP. However, the time taken to reach the saturation activity is also influenced by the slope of corrosion rate, coastdown situation, equilibrium corrosion rate, and energy ratio β.

• 한국전산구조공학회논문집
• /
• 제37권3호
• /
• pp.173-178
• /
• 2024

본 논문에서는 스테레오 비전 센서를 이용한 프리팹 강구조물(PSS: Prefabricated Steel Structures)의 조립부 형상 품질 평가 기법을 소개한다. 스테레오 비전 센서를 통해 모형의 조립부 영상과 포인트 클라우드 데이터를 수집하였으며, 퍼지 기반 엣지 검출, 허프 변환 기반 원형의 볼트 홀 검출 등의 영상처리 알고리즘을 적용하여 조립부 영역의 볼트홀을 검출하였다. 영상 내 추출된 볼트홀 외곽선 위 세 점의 위치 정보에 대응되는 3차원 실세계 위치 정보를 깊이 영상으로부터 획득하였으며, 이를 기반으로 각 볼트홀의 3차원 중심 위치를 계산하였다. 통계적 기법 중 하나인 주성분 분석 알고리즘(PCA: Principal component analysis) 알고리즘을 적용함으로써 3차원 위치 정보를 대표하는 최적의 좌표축을 계산하였다. 이를 통해 센서의 설치 방향 및 위치에 따라 센서와 부재 간 평행이 아니더라도 안정적으로 볼트홀 간의 거리를 계측하도록 하였다. 각 볼트홀의 2차원 위치 정보를 기반으로 볼트홀의 순서를 정렬하였으며, 정렬된 볼트홀의 위치 정보를 바탕으로 인접한 볼트홀 간의 각 축의 거리 정보를 계산하여 조립부 볼트홀 위치 중심의 형상 품질을 분석하였다. 측정된 볼트홀 간의 거리 정보는 실제 도면의 거리 정보와의 절대오차와 상대오차를 계산하여 성능 비교를 진행하였으며, 중앙값 기준 1mm 내의 절대오차와 4% 이내의 상대오차의 계측 성능을 확인하였다.