• Journal of the Korean Society of Hazard Mitigation
• /
• v.10 no.3
• /
• pp.119-131
• /
• 2010

Drought is one of disaster causing factors to produce severe damage in the World because drought is destroyed to the ecosystem as well as to make difficult the economy of the drought area. This study, using Palmer Drought Severity Index carries out correlation analysis with sea surface temperatures. Comparative analysis carries out by calculated Palmer Drought Severity Index and past drought occurrence year. Result of comparative analysis, PDSI indexes were in accord with the past drought. Cluster analysis for correlation analysis carries out using precipitation and temperature that is input datas palmer drought severity index, and the result of cluster analysis was classified as 6. Also, principal component carries out using result of cluster analysis. 14 principal component analyze out through principal component analysis. Using analyzed 14 principal component carries out correlation analysis with sea surface temperature that is delay time from 0month until 11month. Correlation analysis carries out sea surface temperatures and calculated cycle component of the low frequency through Wavelet Transform analysis form principal component. Result of correlation analysis, yang(+) correlation is bigger than yin(-) correlation. It is possible to check similar correlation statistically the area of sea surface temperature with sea surface temperature in the Pacific. Forecasting possibility of the future drought make propose using sea surface temperature.

• Journal of Korean Society on Water Environment
• /
• v.26 no.6
• /
• pp.919-925
• /
• 2010

The features of precipitating reaction of fluoride have been examined by employing waste gypsum as a precipitant. The major component of waste gypsum was examined to be CaO with minor components of $SO_3$, $SiO_2$. In the experimental condition, the precipitating reaction of fluoride progressed rapidly within a few minutes after the reaction started and reached its equilibrium in 10 minutes. Kinetic analysis showed that the precipitating reaction of fluoride generally followed a first Oder and second Oder with decreasing rate constant with the initial dosage of precipitant. XRD analysis showed that the crystalline structure of precipitate was mainly $CaF_2$ with partly $Ca_5(PO_4)_3(OH)$.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.3
• /
• pp.61-67
• /
• 2001

The remaining life estimation for the aged component is very important because mechanical properties of the compo-nents are degraded with time of service exposure in high temperature etc. The destructive method is widely used for the estimation of material degradation, but it has a difficulty in preparing specimens from in-service industrial facilities. In order to evaluate the feasibility of ultrasonic evaluation method for properties of high temperature materials, 2.25Cr-1Mo steel specimens which were prepared by the isothermal aging heat treatment at 63$0^{\circ}C$ were evaluated by ultra-sonic measurements investigating the change of velocities and attenuation coefficient. In this results, attenuation coefficient was found to be sensitive to material degradation mainly attributed to the change of grain size and the precipitation of impurities in grain boundaries, but velocity was not for all specimens.

• Journal of Powder Materials
• /
• v.10 no.5
• /
• pp.310-317
• /
• 2003

Two-component ceramic (alumina-zirconia) composites were fabricated by a soft-solution process in which polyethylene glycol (PEG) was used as a polymeric carrier. Metal salts and PEG were dissolved in ethyl alcohol without any precipitation in 1:1 volume ratio of alumina and zirconia. In the non-aqueous system, the flammable solvent made explosive, exothermic reaction during drying process. The reaction resulted in formation of volume expanded, porous precursor powders by a vigorous decomposition of organic components in the precursor sol. The PEG content affected the grain size of sintered composites as well as the morphology of precursor powders. The difference of microstructure in sintered composite was attribute to the solubility and homogeneity of metal cations in precursor sol. At the optimum amount of the PEG polymer, the metal ions were dispersed effectively in solution and a homogeneous polymeric network was formed. It made less agglomerated particles in the precursor sol and affected on uniform grain size in sintered composite.

• Journal of Powder Materials
• /
• v.19 no.6
• /
• pp.424-428
• /
• 2012

Nano Pd spot-coated active carbon powders were synthesized by a hydrothermal-attachment method (HAA) using PVP capped Pd colloid in a high pressure bomb at $250^{\circ}C$, 450 psi, respectively. The PVP capped Pd colloid was synthesized by the precipitation-redispersion method. PVP capped Pd nano particles showed the narrow size distribution and their particle sizes were less than 8nm in diameter. In the case of nano Pd-spot coated active carbon powders, nano-sized Pd particles were adhered in the active carbon powder surface by HAA method. The component of Pd was homogeneously distributed on the active carbon surface.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.3
• /
• pp.47-55
• /
• 1990

An adaptive algorithm was applied to forecast daily stream flows in real time using rainfall data. A three-component tank model was selected to simulate the flows and its time-variant parameters were self-calibrated with updated data using a parameter optimization scheme, golden section search method. The resulting adaptive model, APTANK, was applied to six watersheds, ranging from 0.47 to 33.62 km$^2$ size and the simulated daily streamflows were compared with the measured. The simulation results were in good agreement with the field data. APTANK is found to be applied to real-time flow simulation purposes such as a tool for irrigation water resources management and operations. The model is particularly good to simulate streamflows on dry days as compared to wet days having runoff-induced precipitation.

• Journal of the Korean Ceramic Society
• /
• v.28 no.4
• /
• pp.289-296
• /
• 1991

Hydroxyapatite (HAp)-zirconia bioceramics, which have excellent biocompatibility with tissue of bone and tooth and good mechanical properties, were synthesized, and their properties and biocompatibility were investigated. HAp powders were synthesized with Ca/P=1.67 and pH 11 by precipitation method. A fine spherical monodispersed ZrO2 powders were prepared by metal alkoxide method, and then they were partially stabilized with 10 mol% CaO by solid state reaction at 1300℃. HAp-zirconia composites were prepared by sintering of these HAp mixed with various amount CaO-partially stabillized zirconia (PSZ). When HAp containing 15 wt% PSZ with 10 mol% CaO (PSZ(10C)) were sintered at 1250℃, it was prevented to decompose into TCP and ZrO2 was uniformly dispersed at HAp matrix. Mechanical strength of these sintered bodies were increased by addition of 15 wt% PSZ(10C), the bending strength of compacts fired at 1250℃ was 165 MPa. HAp-PSZ composites chemically bonded each other in Ringer's solution and the component of bonded layer was HAp. These composites did not prevent cell-growing and exhibit any cytotoxic effects.

• Journal of the Korean Ceramic Society
• /
• v.27 no.3
• /
• pp.311-320
• /
• 1990

Hydroxyapatite powders were synthesized with Ca/P=1.67, 1.70 and pH=7, 11 by precipitation method and fluorine substituted hydroxyapatite ceramics were prepared using these powders. After characterization of these hydorxyapatite bioceramics, chemical bonding between these sepcimens in simulated body fluid was investigated. Bysubstitution of 7.5% of fluorine, hydroxyapatite was prevented to decompose into β-tricalcium phosphate and its sintered density and mechanical strength were increased. The bending strength of these hydroxyapatite ceramics was 137MPa. The hydroxyapatite ceramics chemically bonded each other in Ringer's solution and the component of bonded layer was also hydroxyapatite.

• Fibers and Polymers
• /
• v.4 no.4
• /
• pp.195-198
• /
• 2003

Epoxidized polybutadiene (EPB) was prepared by polybutadiene (PB) with m-chloroperbenzoic acid (MCPBA) in homogeneous solution. EPB was blended with poly(3-hydroxybutyrate) (PHB) up to 30 wt% by solution-precipitation procedure. The thermal decomposition of PHB/EPB blends was studied by thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) and differential thermal analysis (DTA). The thermograms of PHB/EPB blends contained a two-step degradation process, while that of pure PHB sample exhibited only one-step degradation process. This degradation behavior of PHB/EPB blends, which have a higher thermal stability as measured by maximum decomposition temperature and residual weight, is probably due to crosslinking reactions of the epoxide groups in the EPB component with the carboxyl chain ends of PHB fragments during the degradation process, and the occurrence of such reactions can be assigned to the exothermic peaks in their DTA thermograms.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.31-32
• /
• 2000

$Zn_2SiO_4:Mn$ phosphors have been recently spotlighted as a green component for plasma TV application. Commercial phosphors such as P1 and P39 have been known to be a very efficient green light emitter for lamp and CRT application. Unfortunately, such commercial phosphors are not suitable for the plasma TV application as both the emission intensity and the decay time do not meet the requirement for plasma TV. The present investigation aims at improving the existing $Zn_2SiO_4:Mn$ phosphors for the purpose of adapting them to PDP application.