• 콘크리트학회지
• /
• 제7권4호
• /
• pp.119-128
• /
• 1995

이 연구는 최근 건설공사에서의 인력 및 원가의 절감, 공기의 단축 등을 도모하기 위하여 도입되고 있는 하프슬래브의 실용화를 위한 구조거동을 알아보기 위한 실험적 연구이다. PC 패널의 두께, 트러스메쉬의 형사, 가력하중의 형태를 변수로 총 17개의 시험체를제작하여 PC 패널, 하프슬래브, 하프슬래브-벽체 접합부의 휨성능 실험을 하였다. 실험결과, 부방향 하중을 받는 PC 패널의 휨강도가 설계강도보다 작게 나타났으나 정방향 하중을 받는 PC판넬과 덧침콘크리트의 분리현상이 발견되지 않았으며 휨강도 또한 일체로 타설한 부재와 같은 휨내력을 발현하였다. 따라서, 본 연구에서는동바리를 2.0-2.5m간격으로 설치하고, PC판넬과 덧침콘크리트와의 접합면을 조면처리하고 청결을 유지하면 사용상 문제가 없는 것으로 판단되었다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권3호
• /
• pp.9-17
• /
• 2020

이 연구의 목적은 프리캐스트 콘크리트 벽체와 H-pile로 구성된 벽체구조의 횡하중저항 성능을 평가하는 것이다. 이러한 형태의 구조는 옹벽 및 방음벽 기초 구조물로 사용된다. 실제 크기의 목업시험체를 설계하였으며, 실험체를 제작하였다. 대상 구조체의 설계횡하중은 54.6kN이다. 실제 현장에서 6.5m의 파일과 유사한 변형 프로파일을 갖는 실험체의 파일의 길이를 이론적으로 결정하였으며, 1.5m로 제작하였다. 실험중 벽체의 횡방향 변위가 파일의 변형률을 모니터링 하였으며, 균열의 발생을 육안 조사하였다. 실험으로부터 평가된 하중 및 변형 능력을 설계능력과 비교하였다. 실험결과는 설계하중을 저항하는데 충분한 성능을 보유하고 있음을 나타냈다.

• Computers and Concrete
• /
• 제13권4호
• /
• pp.547-567
• /
• 2014

Precast Seismic Structural Systems (PRESSS) provided an iterative procedure for obtaining optimum design of unbonded post-tensioned coupled precast concrete wall systems. Although PRESSS procedure is effective, however, it is lengthy and laborious. The purpose of this research is to employ Artificial Neural Network (ANN) to predict the optimum design parameters for such wall systems while avoiding the demanding iterative process. The developed ANN model is very accurate in predicting the nondimensional optimum design parameters related to post-tensioning reinforcement area, yield force of shear connectors and ratio of moment resisted by shear connectors to the design moment. The Mean Absolute Percent Error (MAPE) for the test data for these design parameters is around %1 and the correlation coefficient is almost equal to 1.0. The developed ANN model is then used to study the effect of different design parameters on wall behavior. It is observed that the design moment and the concrete strength have the most influence on the wall behavior as compared to other parameters. Several design examples were presented to demonstrate the accuracy and effectiveness of the ANN model.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.425-430
• /
• 1996

The purpose of this study is to investigate the behavior of the bearing precast concrete (pc) wall structure with hollow core based on experimental tests. In order to evaluate the cyclic performance of the pc walls. Too one story pc walls and ond one reinforced concrete wall are made. The experimental results of pc walls were compared with those values of reinforced concrete (rc) wall. The structural behaviors of pc wall structure with hollow core are similar to those of reinforced concrete bearing wall structure. This study shows that the pc wall with hollow core could be treated as rc wall when designs the pc wall structure against lateral loads

• 산업기술연구
• /
• 제3권
• /
• pp.103-116
• /
• 1983

Recent developments in multi-storey buildings for residential purpose have led to the extensive use of shear walls for the basic structural system. When the coupled shear wall system is used, joined together with cast-in-place concrete or mortar (or grout), the function of the continuous joints is a crucial factor in determining the safety of L.P. Precast concrete shear wall structures, because the function of the continuous joints(Vertical wall to wall joints) is to transfer froces from one element(shear wall panel) to another, and if sufficient strength and ductility is not developed in the continuous joints, the available strength in the adjoining elements may not be fully utilized. In this paper, the influence of the stiffness of vertical joints(wet vertical keyed shear joints) on the behaviour of precast shear walls is theoretically investigated. To define how the stiffness of the vertical joints affect the load carrying capacity of L.P.Precast concrete shear wall structure, the L.P.Precast concrete shear wall structure is analyzed, with the stiffness of the vertical joints varying from $K=0.07kg/mm^3$(50MN/m/m) to $K=1.43kg/mm^3$(1000MN/m/m), by using the continuous connection method. The results of the analysis shows that at the low values of the vertical stiffness, i.e. from $K=0.07kg/mm^3$(50MN/m/m) to $K=0.57kg/mm^3$(400MN/m/m), the resisting bending moment and shearing force of precast shear walls, the resisting shearing force of vertical joints and connecting beams are significantly affected. The detailed results of analysis are represented in the following figures and Tables.

• 한국건축시공학회지
• /
• 제23권4호
• /
• pp.465-476
• /
• 2023

공동주택 지하층 공사시 발생하는 생산성 저하 문제를 해결하기 위한 개선책으로 필요한 PC 더블월(Double Wall) 공법을 개발하였다. 개발 공법은 기존의 PC 더블월 공법과 차별화되어, 지하 주동부의 다양한 PC 형상에 대응할 수 있고, 수평 및 수직 재하 등 부담 하중의 축력비에 충분히 견딜 수 있는 구조적으로 안전한 PC 더블월 공법으로서, 현장 테스트베드를 통하여 설계 및 제작기술, 그리고 시공기술의 적용성 분석하고 개발 공법의 실물 사이즈에 대한 목업테스트를 통해 품질성능을 검토하였다. 목업 테스트 수행 결과, PC 더블월의 기립 설치 및 내부 채움 콘크리트 타설시 균열이나 변형은 관측되지 않아, 구조적으로 안전한 것으로 나타났으며, 내부 채움 콘크리트는 양호한 품질 상태를 유지하였다. 복합적인 요인으로 인해 개발 공법을 실제 APT 주동부 지하층에 적용하지 못해 개발공법의 시공성 분석은 개발 자료를 기반으로한 설치 전문가들의 인터뷰를 통해 분석하였다. 개발 디테일을 적용하여 PC 더블월을 두가지 폭(W=2.4m, W=3.2m)으로 제작하여 설치하는 경우에 대해 PC 부재 설치 전문가 3명과 인터뷰를 수행하였다. 재래식 현장 타설 공법이 통상 47일/층~68일/층 소요되는 데 반해, 제안공법을 적용하면 공기일수가 20일/층~29일/층 소요되는 것으로 나타나, 공기단축 측면에서 효과가 큰 것으로 나타났다. 추후 연구 수행 방향으로서, 실제 APT 주동부 지하층에 적용하여, 시공상 관리 이슈를 추가적으로 도출하고, 공기단축 및 품질 유지에 대한 결과를 검증할 예정이다.

• Advances in concrete construction
• /
• 제9권5호
• /
• pp.437-448
• /
• 2020

In high rise buildings that utilize precast large panel system for construction, the shear wall provides strength and stiffness during earthquakes. The performance of a wall panel system depends mainly on the type of connection used to transfer the forces from one wall element to another wall element. This paper presents an experimental investigation on different types of construction detailing of the precast wall to wall vertical connections under reverse cyclic loading. One of the commonly used connections in India to connect wall to wall panel is the loop bar connection. Hence for this study, three types of wet connections and one type of dry connection namely: Staggered loop bar connection, Equally spaced loop bar connection, U-Hook connection, and Channel connection respectively were used to connect the precast walls. One third scale model of the wall was used for this study. The main objective of the experimental work is to evaluate the performance of the wall to wall connections in terms of hysteretic behaviour, ultimate load carrying capacity, energy dissipation capacity, stiffness degradation, ductility, viscous damping ratio, and crack pattern. All the connections exhibited similar load carrying capacity. The U-Hook connection exhibited higher ductility and energy dissipation when compared to the other three connections.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.87-96
• /
• 2010

PAP method is a combined measures which consist a anchored retaining wall method with permanent ground anchors and vertical precast concrete panels, step by step on the slope surface. And soil is back filled between slope and vertical precast panels. Therefore, this method is more effective than any other ground anchor reinforcing methods of slope stability, for example cross type concrete block ground anchor or buttress concrete block ground anchor method. Because of increasing effective anchor force and green tree planting.

• 한국건축시공학회지
• /
• 제11권5호
• /
• pp.501-514
• /
• 2011

Recently, there have been many cases in which the difficulty of repair and replacement of principal elements in the bearing wall structure for apartment buildings, which is a major part of apartment buildings in Korea, has led to the reconstruction of buildings rather than their remodeling. To address this problem, the Korea government now allows a floor area ratio of up to 20 %, and has relaxed the building height limits to encourage the use of a rahmen structure instead of a bearing wall structure. However, since reinforced concrete rahmen structures have many problems, including higher floor height and greater construction cost, a great deal of research into rahmen composite precast concrete structures have been conducted. Green Frame, one of the developed prototypes, is expected to provide economic benefits through in-situ production for precast concrete column and beam. For in-situ production of composite precast concrete members, a detailed plan for production, curing, and installation is needed. However, it needs to be confirmed that the space is sufficient to produce the precast concrete members on-site before planning those activities. Therefore, this study proposes in-situ production analysis of composite precast concrete members of Green Frame with the evaluation of structural safety and available area on the parking structure. The result of this study shows that the in-situ production of precast concrete members is possible through a case study.

• 복합신소재구조학회 논문집
• /
• 제6권2호
• /
• pp.52-62
• /
• 2015

This study aims at developing a new seismic resistant method by using precast concrete wall panels for existing low-rise, reinforced concrete beam-column buildings such as school buildings. Three quasi-static hysteresis loading tests were performed on one unreinforced beam-column specimen and two reinforced specimens with U-type precast wall panels. Top shear connection of the PC panel was required to show the composite strength of RC column and PC wall panel. However, the strength of the connection did not influence directly on the ultimate loading capacities of the specimens in the positive loading because the loaded RC column push the side of PC wall panel and it moved horizontally before the shear connector receive the concentrated shear force in the positive loading process. Under the positive loading sequence(push loading), the reinforced concrete column and PC panel showed flexural strength which is larger than 97% of the composite section because of the rigid binding at the top of precast panel. Similar load-deformation relationship and ultimated horizontal load capacities were shown in the test of PR1-LA and PR1-LP specimens because they have same section dimension and detail at the flexural critical section. An average of 4.7 times increase in the positive maximum loading(average 967kN) and 2.7 times increase in the negative maximum loading(average 592.5kN) had resulted from the test of seismic resistant specimens with anchored and welded steel plate connections than that of unreinforced beam-column specimen. The maximum drift ratios were also shown between 1.0% and 1.4%.