• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.2
• /
• pp.1-8
• /
• 2011

The presence of high silica in bamboo hinders the use of this material for production of rayon grade pulp. Research has been carried out to overcome this deficiency and improve quality of rayon grade pulp with the modification in pulping and bleaching process. Effect of acid boosted water prehydrolysis, sulphuric acid pre-treatment of unbleached pulp, chlorination stage at lower pH and treatment of bleached pulp with $SO_2$ water were evaluated. Acid boosted water prehydrolysis of chips reduces prehydrolysis time by 50 minutes as compared to water prehydrolysis. Treatment of unbleached pulp with sulphuric acid reduces ash, acid insoluble, silica, calcium and iron contents of the pulp by 56, 31, 82, 84 and 60% respectively. The addition of acid, increase in kappa factor in $C_D$ stage and combination of both were effective in removing silica in the pulp. Treatment of final bleached pulp with $SO_2$ water removes silica to a great extent and improves optical properties of the pulp as compared to $H_2SO_4$ or PAA. Pretreatment of the pulp with acid and modification in the bleaching process can reduce silica substantially and improve the quality of rayon grade bamboo pulp.

• Journal of Korea Water Resources Association
• /
• v.55 no.spc1
• /
• pp.1283-1293
• /
• 2022

The purpose of this study is to predict residual chlorine in order to maintain stable residual chlorine concentration in sedimentation basin by using artificial intelligence algorithms in water treatment process employing pre-chlorination. Available water quantity and quality data are collected and analyzed statistically to apply into mathematical multiple regression and artificial intelligence models including multi-layer perceptron neural network, random forest, long short term memory (LSTM) algorithms. Water temperature, turbidity, pH, conductivity, flow rate, alkalinity and pre-chlorination dosage data are used as the input parameters to develop prediction models. As results, it is presented that the random forest algorithm shows the most moderate prediction result among four cases, which are long short term memory, multi-layer perceptron, multiple regression including random forest. Especially, it is result that the multiple regression model can not represent the residual chlorine with the input parameters which varies independently with seasonal change, numerical scale and dimension difference between quantity and quality. For this reason, random forest model is more appropriate for predict water qualities than other algorithms, which is classified into decision tree type algorithm. Also, it is expected that real time prediction by artificial intelligence models can play role of the stable operation of residual chlorine in water treatment plant including pre-chlorination process.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.211-215
• /
• 2005

Stabilization process is absolutely necessary to convert the precursor fibers into chemically, physically, thermally and structurally stable carbon fibers. Especially, it is critically important for rayon fibers experiencing severe weight loss and thermal shrinkage occurring at the stabilization stage below $400^{\circ}C$. The stabilization of rayon fibers strongly depends not only on stabilization temperature but also on heating rate, chemical pre-treatment, atmosphere, and so on. In the present study, the weight loss, fiber diameter change occurred in the furnace during the stabilization process for rayon fibers produced with various heating rates and in the absence and presence of phosphorous-based flame retardants and the thermal stability of the stabilized fibers were investigated. The result indicates that the weight, diameter and thermal stability of the rayon fibers are significantly affected by the type and amount of the flame retardant used. It is also suggested that the pre-treatment of rayon fibers with a concentration lower than $3\;vol\%$ of phosphoric acid is most desirable for further carbonization process of stabilized rayon fibers.

• Quality Improvement in Health Care
• /
• v.3 no.1
• /
• pp.126-143
• /
• 1996

Background : Little work has been carried out regarding quality assessment research in a primary care setting, comparing with that of hospitals. This study aims to evaluate the process of diagnosis and management of hypertension by public health doctors on the basis of pre-established clinical guideline, and to identify several modifying factors associated with them. Methods : Hypertension was selected as the target disease, because it is a chronic disease which is of great public health importance. Self-administered questionnaires were mailed to public health doctors practicing at health centers and health subcenters across the nation. The response rate was 20.9%. The questionnaire included the diagnosis and management process such as measuring blood pressure, history taking, physical examinations, and treatment approches and potentially modifying factors such as level of training, duration of practice as a public health doctor, and education on management of hypertension. Results : Public health doctors pay little attention in measuring BP, hypertension related history taking, performing physical examination and laboratory examination. But they devoted much effort in diagnosing hypertension exactly and giving nonpharmacological treatment. Among various antihypertensive drugs, calcium-channel blockers were the most preferred agent(50.9%). Level of training, duration of practice ad a public health doctor, and education on management of hypertension made no difference on quality of care(p>0.05). Conclusion : These public health doctors showed poor compliance with the pre-established clinical guidelines, which leaves much to be desired in diagnosing and managing hypertensive patients by public health doctors. This study might be able to contribute to develop some strategies, such as educational programs, which would be able to improve the process of care in hypertensives.

• Culinary science and hospitality research
• /
• v.24 no.1
• /
• pp.105-113
• /
• 2018

In this study, optimized pre-treatment conditions were investigated to improve the quality of gochujang apple jangachi. The moisture content was decreased by 14% in 60% sugar solution and 17% in 30% salt solution during 12 hours. On the one hand, in the case of dry sugar and salt method, moisture content was decreased rapidly by 20% and 24%, respectively during 12 hours. Compared with the sugar and salt solution method, the dry sugar and salt method was more effective in reducing moisture content during 12 hours. In the case of osmotic dehydration of the apple parts in the dry sugar method, the moisture content of the flesh, flesh including peel, and peel of apple decreased by 23%, 20%, and 16%, respectively during 6 hours. However, in the dry salt method, the moisture content of the flesh, flesh including peel, and peel of apple decreased by 19%, 12% and 13%, respectively during 2 hours. During this time, the pH tended to decrease, regardless of the presence of sugar and salt. Total acidity was slightly increased in the case of salt. In hot air drying after osmotic dehydration, the moisture content of flesh including peel of apple decreased from 64% and 67% to 31% and 27%, respectively at 90 minutes, and from 64% and 67% to 11% and 18% at 150 minutes, respectively. The moisture content of the peel decreased from 51% to 10% at 120 minutes. As a result of the sensory evaluation, the overall acceptance of the flesh and flesh including peel was highly evaluated, resultantly, the products were considered to be suitable for the production of gochujang apple jangachi.

• Journal of Welding and Joining
• /
• v.32 no.3
• /
• pp.60-67
• /
• 2014

The ability of electronic packages and assemblies to resist solder joint failure is becoming a growing concern. This paper reports on a study of high speed shear energy of Sn-4.0wt%Ag-0.5wt%Cu (SAC405) solder with different electroless Ni-P thickness, with $HNO_3$ vapor's status, and with various pre-conditions. A high speed shear testing of solder joints was conducted to find a relationship between the thickness of Ni-P deposit and the brittle fracture in electroless Ni-P deposit/SAC405 solder interconnection. A focused ion beam (FIB) was used to polish the cross sections to reveal details of the microstructure of the fractured pad surface with and without $HNO_3$ vapor treatment. A scanning electron microscopy (SEM) and an energy dispersive x-ray analysis (EDS) confirmed that there were three intermetallic compound (IMC) layers at the SAC405 solder joint interface: $(Ni,Cu)_3Sn_4$ layer, $(Ni,Cu)_2SnP$ layer, and $(Ni,Sn)_3P$ layer. The high speed shear energy of SAC405 solder joint with $3{\mu}m$ Ni-P deposit was found to be lower in pre-condition level#2, compared to that of $6{\mu}m$ Ni-P deposit. Results of focused ion beam and energy dispersive x-ray analysis of the fractured pad surfaces support the suggestion that the brittle fracture of $3{\mu}m$ Ni-P deposit is the result of Ni corrosion in the pre-condition level#2 and the $HNO_3$ vapor treatment.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.5
• /
• pp.426-431
• /
• 2019

In this study, we report the effect of pre-treatment of alpha-$Ga_2O_3$ grown on a sapphire substrate by halide vapor phase epitaxy (HVPE). During the pre-treatment process, 10 sccm of GaCl gas was injected to the sapphire substrate at $470^{\circ}C$. The surface morphologies of the alpha-$Ga_2O_3$ layers grown with various pre-treatment time (3, 5, and 10 min) were flat and crack-free. The transmittance of the alpha-$Ga_2O_3$ epi-layers was measured to analyze their optical properties. The transmittance was over 80% within the range of visible light. The strain in the alpha-$Ga_2O_3$ grown with a pre-treat 5 min was measured, and was found to be close to the theoretical XRD peak position. This can be explained by the reduction of strain having caused a lattice mismatch between the alpha-$Ga_2O_3$ layer and sapphire substrate. The calculated dislocation density of the screw and edge were $2.5{\times}10^5cm^{-2}$ and $8.8{\times}10^9cm^{-2}$, respectively.

• Journal of Fashion Business
• /
• v.7 no.5
• /
• pp.83-100
• /
• 2003

It has been known that the chitosan pre-treated fabrics can be dyed without the aid of mordanting process. It is due to the fact that chitosan treatment increases the dye uptake. However, the effect of chitosan on the dyeing mechanism has not been elucidated thus far. Following explanations have been presented regrading the action of the chitosan on the dyeing mechanisms: 1. Chitosan absorbs dyestuffs and facilitates dyeing since the chitosan itself has a good affinity toward dyestuffs. 2. Chitosan acts as a metallic mordant between the fiber molecule and dyestuff. 3. Fiber molecules and chitosan form a coordinate covalent bond. This study aims the quantitative investigation on the effect of the chitosan and the effect of sequence of the mordanting, pre-mordanting or post-mordanting, on the dyeing of the fabrics. Cotton fabrics and acylic fabrics were pre-treated with chitosan before dyeing with cochineal dyestuffs. Method 1: Fabrics were, firstly, mordanted with Al, Sn, Cu, and Fe; mordanted fabrics were, secondly, treated with chitosan; mordanted and chitosan-treated fabrics were, thirdly, dyed. Method 2: Fabrics were, firstly, treated with chitosan; chitosan-treated fabrics were, secondly, mordanted with Al, Sn, Cu, and Fe; these were dyed then. Method 2 gave distinguished specific color development with darker shade. Apart from this, chitosan-treated fabrics yielded darker shade compared to the pre-mordanted fabrics without chitosan-treatment.

• Korean Journal of Food Science and Technology
• /
• v.50 no.2
• /
• pp.186-190
• /
• 2018

This study was investigated changes of physical properties of soybean sprout by changing single or combinations of parameters in each manufacturing process. In blanching, use of sugar solution and decrease of blanching time reduced hypocotyl diameter and weight loss of soybean sprouts. However, single application among parameters in pre-treatment did not induce significant changes in soybean sprout during cooking of frozen product. The control process was blanching with water, seasoning with salt and sugar, and adding cooked rice with mixing type. Combinations of parameters, which were blanching with sugar solution, seasoning with sugar, and adding cooked rice with topping type, induced significantly higher shear force values ($592{\pm}21g$), larger diameter ($1.58{\pm}0.14mm$), and less weight loss ($13.4{\pm}3.0%$) of soybean sprouts during cooking of frozen product than those from the control process ($498{\pm}24g$, $1.35{\pm}0.13mm$, and $16.0{\pm}1.7%$, respectively) (p<0.05).

• Journal of Korean Society on Water Environment
• /
• v.36 no.6
• /
• pp.535-545
• /
• 2020

This study aims to conserve and monitor energy use in public sewage treatment plants by utilizing data from the SCADA system and by controlling the aeration rate required for maintaining effluent water quality. Power consumption in the sewage treatment process was predicted using the equipment's uptime, efficiency, and inherent power consumption. The predicted energy consumption was calibrated by measured data. Additionally, energy efficiency indicators were proposed based on statistical data for energy use, capacity, and effluent quality. In one case study, a sewage treatment plant operated via the SBR process used ~30% of energy consumed in maintaining the bioreactors and treated water tanks (included decanting pump and cleaning systems). Energy consumption analysis with the K-ECO Tool-kit was conducted for unit processing. The results showed that about 58.7% of total energy consumed was used in the preliminary and biological treatment rotating equipment such as the blower and pump. In addition, the energy consumption rate was higher to the order of 19.2% in the phosphorus removal process, 16.0% during sludge treatment, and 6.1% during disinfection and discharge. In terms of equipment energy usage, feeding and decanting pumps accounted for 40% of total energy consumed following 27% for blowers. By controlling the aeration rate based on the proposed feedback control system, the DO concentration was reduced by 56% compared pre-controls and the aeration amount decreased by 28%. The overall power consumption of the plant was reduced by 6% via aeration control.