• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.5
• /
• pp.449-456
• /
• 2010

The HCCI engine is a prospective internal combustion engine with which high diesel-like efficiencies and very low NOx and particulate emissions can be achieved. However, several technical issues must be resolved before HCCI engines can be used for different applications. One of the issues concerning the HCCI engine is that the operating range of this engine is limited by the rapid pressure rise caused by the release of excessive heat. This heat release is because of the self-accelerated combustion reaction occurring in the engine and the resulting engine knock in the high-load region. The purpose of this study is to evaluate the role of thermal stratification and fuel stratification in reducing the pressure rise rate in an HCCI engine. The concentrations of NOx and CO in the exhaust gas are also evaluated to confirm combustion completeness and NOx emission. The computation is carried out with the help of a multizone code, by using the information on the detailed chemical kinetics and the effect of thermal and fuel stratification on the onset of ignition and rate of combustion. The engine is fueled with dimethyl ether (DME), which allows heat release to occur in two stages, as opposed to methane, which allows for heat release in a single stage.

• Journal of Animal Environmental Science
• /
• v.19 no.2
• /
• pp.109-116
• /
• 2013

In this experiment, we hypothesized that pre-conditioning pig manure with microwave radiation can effectively eliminate moisture and consequently, cut down a need for expensive sawdust. For the experiment, pig manure/sawdust mixture of water content 79% was divided into 4 groups and each of them were treated with microwave for predetermined time periods, 5, 10, 15, 20 minutes. Subsequently, they were transferred to chambers (20 L) and aerobically composted. During the 2 weeks composting, air was supplied using blower (150 L per $1m^3$) and temperature and other variables were monitored continuously. When the data were analyzed, it was found, (1) moisture content was significantly decreased as radiation period extended. (2) weight reduction of compost after completion of composting was noticeably bigger in 15 min radiated group(31%), compared with 5 min (24.6%), 10 min (21.4%), 20 min (27.2%) radiated groups.

• Journal of the Korean institute of surface engineering
• /
• v.53 no.2
• /
• pp.43-52
• /
• 2020

Various aging treatments were conducted on AISI 630 martensitic precipitation hardening stainless steel in order to optimize aging condition. Aging treatment was carried out in the vacuum chamber of Ar gas with changing aging temperature from 380℃ to 430℃ and aging time from 2h to 8h at 400℃. After obtaining the optimized aging condition, several nitrocarburizing treatments were done without and with the aging treatment. Nitrocarburizing was performed on the samples with a gas mixture of H₂, N₂ and CH₄ for 15 h at vacuum pressure of 4.0 Torr and discharge voltage of 400V. The corrosion resistance was improved noticeably by combined process of aging and nitrocarburizing treatment, which is attributed to higher chromium and nitrogen content in the passive layer, as confirmed by XPS analysis. The optimized condition is finalized as, 4h aging at 400℃ and then subsequent nitrocarburizing at 400℃ with 25% nitrogen and 4% methane gas for 15h at vacuum pressure of 4.0 Torr and discharge voltage of 400V, resulting in the surface hardness of around 1300 HV_0.05 and α'_N layer thickness of around 11 ㎛ respectively.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.5
• /
• pp.469-476
• /
• 2018

The purpose of this study was to collect basic data that could be used in the manufacture of two kinds of canned oyster Crassostrea gigas. The steamed oyster was prepared by shucking after boiling for 6 min at $105^{\circ}C$ and then washing and dewatering. The roasted oyster was prepared by baking steamed oyster at $140^{\circ}C$ for 20 min. The manufacturing methods of canned seasoned boiled oyster and canned seasoned roasted oyster were as follows. The boiled or roasted oyster (50 g) was added to a can (RR-90) along with a mixture of seasoning sauce 40 and then seamed using a vacuum seamer under 20 cm Hg after pre-exhausting at $90^{\circ}C$ for 20 min. The two kinds of canned oyster products produced under sterilization of Fo 12 min were tested for cultured bacteria, external appearance, proximate composition, pH, VBN (Volatile basic nitrogen), TBA (Thiobarbiuric aicd) value, amino-N, salinity, color value sensory evaluation, etc. Results showed that the canned seasoned roasted oyster had higher overall acceptability than the canned seasoned boiled oyster. The reason for this was judged to be that the process of roasting at $140^{\circ}C$ for 20 min influenced the sensory evaluation.

• Food Science and Preservation
• /
• v.23 no.6
• /
• pp.759-764
• /
• 2016

This purpose of this study was to determine the best enrichment medium for rejuvenating and recovering Salmonella placed in cold temperature prior to the employment of the gold biosensor combined with a light microscopic imaging system. A mixture of nalidixic-resistant Salmonella Typhimurium and Enteritidis were inoculated onto chicken (1,000 CFU/chicken). After cold injury at $4^{\circ}C$ for 24 hr, Salmonella on chicken was enriched for 6 hr with six non-selective media including buffered peptone water broth, lactose broth, brain heart infusion broth (BHI), universal pre-enrichment broth, nutrient broth, and tryptic soy broth, and five selective media including brilliant green broth (BG), rappaport-vassiliadis R10 broth, selenite cystine broth, selenite broth, and tetrathionate brilliant green broth (TBG) for the comparison of Salmonella growth. Various concentrations of Salmonella (10, 50, 100, 500, and 1,000 CFU/chicken) were then enriched for 6 hr in both BHI and BG media to select the best media. BHI was selected as the most effective non-selective enrichment medium, while BG was selected as the most effective selective enrichment medium. Finally, BHI medium was selected as the most efficient enrichment medium for Salmonella growth injured from cold temperature during processing or storage.

• The Journal of Engineering Research
• /
• v.2 no.1
• /
• pp.133-138
• /
• 1997

The conventional process in synthesizing mullite powder required high temperature ($1300^{\circ}C$) and long chemical reaction time. Thus the combustion process was used to synthesize the mullite powder in order to reduce the reaction time and temperature. The mixture of metal nitrate, fine silica, and fuel was used as the redox compounds under various experimental conditions. The combustion fire in hot plate experiment in rich, lean and stoichiometry fuel does not produce mullite. However, the obvious mullite, small amount of alumina and cristobalite was observed in the $500^{\circ}C$ pre-heat treatment furnace experiment. The components such as silica, urea, aluminm nitrate should be stoichiometry in order to make a perfect mullite crystal.

• Korean Journal of Weed Science
• /
• v.6 no.2
• /
• pp.124-129
• /
• 1986

Weeds emerging on winter wheat and barley field at early spring are troublesome, even with pre-emergence application of herbicides such as butachlor, tribunil, etc. Searching the proper post-applicating herbicides to control those weeds, three herbicides; ioxynil, bromoxynil and MCPA were evaluated with weeding efficacies in barley field. Tank mixture of bromoxynil and MCPA was the most excellent in weeding efficacy, especially in higher mixing rate at early April application to the broad-leaf weeds, among others.

• Journal of Biomedical Engineering Research
• /
• v.36 no.6
• /
• pp.296-301
• /
• 2015

Explant culture condition of dorsal root ganglion have been used to investigate the pathophysiology of peripheral nerve injury, while applying for the various clinical symptom such as trauma, pressure, and stretch. However, explant culture is usually contaminated by mitotic cells, which may observed as a newly divided cells including fibroblast or glia. The mitotic cells could be able to interrupt and change the cell signaling that make it difficult to avoid detrimental effects during the experiments. To eliminate mitotic cells, anti-mitotic reagents like mixture of uridine and 5-fluorodeoxyuridine or cytosine arabinoside were added to the cultures on the following day, but there is no research that investigate viability of anti-mitotic reagent in dorsal root ganglion explant culture. In this study, we investigate inhibition effect of cytosine arabinoside to mitotic cells in dorsal root ganglion explant culture. Also we visualized and analyzed anti-mitotic effect and toxicity of cytosine arabinoside in various concentration condition. This dorsal root ganglion explant culture condition can be applied to research that effect and mechanism of various stimulation and chemical application which affect peripheral nerve regeneration.

• Journal of Environmental Science International
• /
• v.11 no.4
• /
• pp.375-382
• /
• 2002

The total hydrocarbon distribution of oil products obtained from the pyrolysis of four kinds of mixtures of polyethylene-polystyrene waste has been studied by multidimensional chromatography(high performance liquid chromatography followed by capillary gas chromatography)/mass spectrometry. Saturated, unsaturated and aromatic hydrocarbons in oil products were selectively pre-separated according to structural groups by HPLC and the weight fraction of each group was estimated by analysis of each component using GC-FID response factors. The hydrocarbon distribution of aliphatic fraction consists of $C_{5}$ to $C_{25}$ saturated and unsaturated hydrocarbons. And that of aromatics fraction consists of benzene, toluene, xylene, styrene, propenyl benzene, naphthalene, and some of derivatives. Pyrolysis temperature did not affect the ratio of total weight fraction of aliphatic over aromatic hydrocarbon distribution in case of PS only and PE-PS mixtures (1:1 and 1:4 wt. ratio) as a feed while affected the ratio of total wt. fraction in case of PE only. The optimal temperature for the maximum oil production was $600^{\circ}C$ for pyrolysis of PS and 1:1 and 1:4 mixtures of PE and PS. The optimal condition for aromatic recovery was $600^{\circ}C$ with 1:1 mixture of PE and PS. In this condition, aromatic was produced up to 90% of total oil product. The maximum yield of toluene, xylene, styrene, and propenyl benzene were 8.6, 8.9, 51.0 and 7.4% of feed for pyrolysis PS at $700^{\circ}C$, respectively. However, only 1.3% naphthalene was recovered at $700^{\circ}C$ with 1:1 PE:PS(by wt.).

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.677-680
• /
• 2008

The surface of particles was energetically modified by inter-grinding OPC and BFS in vibration mill for improvement of the early strength and low-heat evolution of concretes. BFS was pre-grinding in ball-mill to 2535(BS2) and 3245 $cm^2/g$(BS3), in blaine surface area. The inter-grinding time in vibration mill was changed from 10 minutes to 30 minutes. And Mixing ration of BFS to OPC was changed in 60, 70, 80%. After inter-grinding, the change of specific surface area, particle size distribution, hydration heat of cement and compressive strength of mortar were measured. As the result of comparison test with LHC, it was found that the mixture and inter-grinding time satisfying the value of over 100% of compressive strength for 7 days and under 170J/g of heat of hydration for 72 hours. and it was confirmed that the possibility of low heat slag cement utilizing blast furnace slag(BS2, BS3) with the low fineness in high volumes.