• Journal of Life Science
• /
• v.11 no.3
• /
• pp.203-210
• /
• 2001

To produce the instant marsh calm(Corbicula elatior) soup with abundant taste and flavor. optimum conditions of heating temperature and time for extraction were investigated. Excretion rate in a pre-treatment for excretion of estuary was 82% at 15% salt concentration for 6 hr and 95% at pH 7.5 for 10 hr. The contents of glycogen and amino-nitrogen were the most high levels in the treatments extracted at 9$0^{\circ}C$ for 3 hr, at 10$0^{\circ}C$ for 1.5 hr and at 11$0^{\circ}C$for 1 hr. The contents of total free amino acids in the extracts treated at 9$0^{\circ}C$, 10$0^{\circ}C$ and 11$0^{\circ}C$ were 367.05mg/100g, 472.23 mg/100g and 463.54 mg/100g, respectively and optimal temperature was above 10$0^{\circ}C$. The mineral contents was the most high level for the extract treated at 10$0^{\circ}C$ for 1.5hr. The results of sensory evaluation showed that tastes for the marsh calm extracts had no significant discrimination, while external appearances and flavors for the extract done at 10$0^{\circ}C$ for 1.5 hr were excellent. The extracts at 10$0^{\circ}C$ showed a little dark color and those at 9$0^{\circ}C$ smell a little fish flavor.

• Korean Journal of Plant Resources
• /
• v.25 no.4
• /
• pp.456-464
• /
• 2012

This study was conducted to establish the in vitro optimal condition for seed germination and organogenesis of wild Angelica gigas. The experiment was evaluated the effects of $GA_3$ for pre-treatment with different periods of time (0h, 24h, 48h, 72h) and followed the treatment of seeds by control, scarification and methanol-heating method. As a result, the highest rates (15%) of seed germination was shown under the treatment without soaking of $GA_3$ and methanol-heating treatment. The seed germination was highly increased 60% under the condition of treatment on ultrasonic waves (frequency 80 KHz) with methanol-heating treatment including 0.1 mg/L $GA_3$. The highest callus induction rate was obtained from in vitro germinated stem, root and hypocotyl on the MS medium with 1.0 mg/L NAA and 0.5 mg/L BA. The highest percentages of shooting (50%) and rooting (85%) induction were observed in hypocotyl and root cultured on PGRs free medium and 0.1 mg/L NAA, respectively. In addition, somatic embryogenesis was observed from stem (1.0 mg/L 2,4-D) and hypocotyl (0.1 mg/L NAA).

• Korean Journal of Poultry Science
• /
• v.46 no.3
• /
• pp.137-154
• /
• 2019

This study was conducted to develop and compare Samgyetang broth from extract of pre-treated chicken feet. Chicken feet were subjected to non-heating (control), heating at $70^{\circ}C$ for 12 h in a hot air dryer, and heating at $180^{\circ}C$ for 1 h in an oven. The heat-treated chicken feet were extracted at $121^{\circ}C$ for 1 h and 2 h, respectively. The extract was placed in a pouch with whole chicken carcass ($470{\pm}10g$). The sealed Samgyetang retort was made according to the industrial method. The pH of the extract from preheated chicken feet was lower than that extracted from fresh chicken feet. The Thiobarbituric Acid Reactive Substances (TBARS) value of the preheated chicken feet extract was significantly lower (P<0.05) than that of fresh chicken feet extract, but there were no significant differences among the broths. As the extraction time increased, the pH and TBARS value decreased in the extract (P<0.05) but increased in the broth (P<0.05). According to the sensory evaluation test, the extract from 1 h hot air heating and drying was significantly better in appearance, aroma, and overall preference than the other treatments (P<0.05). The GC-MS results showed that benzaldehyde and benzothiazole, which are widely known to give meat and nuts flavor, were detected in those treatments (P<0.05). The Samgyetang broths prepared from 1 h hot air heating and drying extract were significantly higher in the overall acceptability according to the sensory test (P<0.05). In summary, the quality of retort Samgyetang broth can be improved by adding chicken feet extract which is subjected to heating and drying for 1 h.

• Korean Chemical Engineering Research
• /
• v.52 no.1
• /
• pp.133-140
• /
• 2014

The experiment was designed to compare the char combustion kinetics of pulverized Indonesia coals commonly utilized in Korea power plants. The reaction rate of coal char has been formulated using the external and internal effectiveness factors to describe the diffusion effect quantitatively. The Random Pore Model (RPM) was used for applying internal specific surface area as a function of carbon conversion ratio. Reaction rate was obtained from reaction time using the Wire Heating Reactor (WHR) which can heat and measure the char particle temperature at the same time. BET and TGA were used to obtain physical properties such as internal specific surface area and structural parameter. Three kinds of Indonesia Sub-bituminous coals "BARAMULTI, ENERGYMAN, AGM" were used in order to derive the activation energy and pre-exponential factor. The results of this study showed that the effect of internal diffusion than that of external diffusion is the dominant as comparison of kinetics was reflected in external and internal effectiveness factors. For three kinds of coal char, finally, activation energy of intrinsic kinetics indicates 110~118 kJ/mol.

• Science of Emotion and Sensibility
• /
• v.21 no.2
• /
• pp.137-144
• /
• 2018

The study figured out the operational conditions of a two-way movement actuator made of one-way shape memory alloy (OWSMA) for versatile ventilation intelligent garments. To develop a low-power actuator that consumes energy only when a garment changes its form such as opening and closing, multiple channels of OWSMA were used, and optimum diameter of the wires was examined. For the switch device, optimum voltage application unit time was determined. Optimum diameter of OWSMA wire was determined by applying 3.7V to the pre-determined candidate diameters, which demonstrated two-way operation in previous studies. In order to evaluate the optimum voltage application time, the internal diameter of the actuator was measured while increasing and decreasing by 50 ms from the unit time of voltage application. Delay time under two-way operation of the actuator was measured to minimize interference caused by heat between channels. Power of 3.7V was applied to OWSMA for assessment of optimal time, and the whole process from heating to cooling was video-recorded with a thermal image camera to determine the point of time at which the temperature of OWSMA wire dropped below the phase transformation temperature. The results showed that $0.4{\Phi}$ was the most suitable diameter, and the optimum unit time of voltage applied to open and close the actuator was 4100ms. It was also shown that the delay time should be more than 1.8 seconds between two-way operations of the actuator.

• Journal of Korea Society of Waste Management
• /
• v.35 no.7
• /
• pp.616-626
• /
• 2018

The quality standards of solid refuse fuel (SRF) define the values for 12 physico-chemical properties, including moisture, lower heating value, and metal compounds, according to Article 20 of the Enforcement Rules of the Act on Resource Saving and Recycling Promotion. These parameters are evaluated via various SRF Quality Test Methods, but problems related to the heavy metal content have been observed in the microwave acid digestion method. Therefore, these methods and their applicability need improvement. In this study, the appropriate testing conditions were derived by varying the parameters of microwave acid digestion, such as microwave power and pre-treatment time. The pre-treatment of SRF as a function of the microwave power revealed an incomplete decomposition of the sample at 600 W, and the heavy metal content analysis was difficult to perform under 9 mL of nitric acid and 3 mL of hydrochloric acid. The experiments with the reference materials under nitric acid at 600 W lasted 30 minutes, and 1,000 W for 20 or 30 minutes were considered optimal conditions. The results confirmed that a mixture of SRF and an acid would take about 20 minutes to reach $180^{\circ}C$, requiring at least 30 minutes of pre-treatment. The accuracy was within 30% of the standard deviation, with a precision of 70 ~ 130% of the heavy metal recovery rate. By applying these conditions to SRF, the results for each condition were not significantly different and the heavy metal standards for As, Pb, Cd, and Cr were satisfied.

• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.588-595
• /
• 2020

Prediction and control of nitrogen oxides (NO_x) emission is of great interest in industry due to stricter environmental regulations. Herein, we propose an artificial intelligence (AI)-based framework for prediction of NO_x emission. The framework includes pre-processing of data for training of neural networks and evaluation of the AI-based models. In this work, Long-Short-Term Memory (LSTM), one of the recurrent neural networks, was adopted to reflect the time series characteristics of NO_x emissions. A decision tree was used to determine a time window of LSTM prior to training of the network. The neural network was trained with operational data from a heating furnace. The optimal model was obtained by optimizing hyper-parameters. The LSTM model provided a reliable prediction of NO_x emission for both training and test data, showing an accuracy of 93% or more. The application of the proposed AI-based framework will provide new opportunities for predicting the emission of various air pollutants with time series characteristics.

• Korean Journal of Veterinary Research
• /
• v.30 no.1
• /
• pp.65-71
• /
• 1990

Rabbits were experimentally infected with rabbit hemorrhagic disease virs and the viral pathogenicity, hemagglutinability, and the effect of physicochemical factors were studied. The experimental results were summariaed as follows: 1. Mean rectal temperature of 11 infected rabbits was $40.0{\pm}0.47^{\circ}C$ prior to the virus inoculation, and $39.9{\pm}0.75^{\circ}C$ after 12hrs., $40.2{\pm}0.65^{\circ}C$ after 24hrs., $40.1{\pm}0.77^{\circ}C$ after 36hurs, and $40.6{\pm}0.56^{\circ}C$ just before the death. 2. Mean death time of infected rabbits was $40.3{\pm}22.0$ honrs and its range was 24 to 93 hours. 3. O, B, AB and A type of human erythrocytes were shown their HA in the order, but rabbit and chicken erythrocytes were not hemagglutinated by the virus. 4. In the hemagglutination, less than 0.25 per cent of a final concentration of erythrocytes and 0.2 per cent of BSA in PBS resulted in the best hemagglutination. Phosphate concentration in a range of 0.01M to 0.10M in PBS was not influenced on the hemagglutination reaction, and its pH 7.0 resulted in a better HA. 5. The hemagglutinating titers, in log 2 scale, of organs and tissues of the virus infected rabbits were $9.3{\pm}3.8$ (liver), $9.1{\pm}3.9$ (blood), $6.2{\pm}2.6$ (spleen) and $5.0{\pm}2.5$ (kidney). 6. The physicochemical factors such as heating ($50^{\circ}C$, 10 min.), trypsin treatment (0.05 pre cent, 5 min.), acid treatment (pH 3.0, 20 min.) and ether extraction (3 times) were not affective to the stability of virus and viral HA activities.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.8
• /
• pp.65-73
• /
• 2013

Ground-coupled heat pump system has attracted attention as a promising renewable energy technology due to its improving energy efficiency and eco-friendly mechanism for space cooling and heating. Pipes buried in the ground play a role of direct thermal interaction between circulating fluid inside the pipe and surrounding soils in the geothermal exchange system. However, both complexities of turbulent flow coupling thermal-hydraulic phenomena and very long aspect ratio of the pipe make it difficult to model the heat exchange system directly. Energy balance for fluid flow inside the pipe was derived to model thermal-hydraulic phenomena, and one-dimensional pipe element was proposed through Galerkin formation and time integration of the equation. Developed element is combined to pre-developed FEM code for THM phenomena in porous media. Numerical results of Thermal Response Test showed that line-source model overestimates equivalent thermal conductivity of surrounding soils due to thermal interaction between adjacent pipes and finite length of the pipe. Thus, inverse analysis for the TRT simulation was conducted to present optimal transformation matrix with utmost convergence.

• Korean Journal of Rural Living Science
• /
• v.5 no.1
• /
• pp.1-8
• /
• 1994

This study was conducted to examine whether there is any effect of the local body exposure to hot and cold alternate stress on the blood flow and heart rate. Environmental condition was $20^{\circ}C$ air temperature, 65% relative humidity and 0.2m/s air movement. 22~32 years old four healthy female subjects wore clothes which they felt comfort sitting on a chair. And then their left hand was immersed twice in ($42^{\circ}C$\;and\;15^{\circ}C$ water alternately. Two of the subjects (E-group) were continually exposed to above condition 12 times. While, the other two (C-group) were exposed twice only at the 1st and 12th time of E-group's exposure. The results obtained from this experiment were as follows. \circled1 The initial response of the finger blood flow in I-group to the thermal stress showed more sensitively at the post-training than pre-training. \circled2 Heart .ate was higher in hand immersion at hot water ($42^{\circ}C$) than at cold water ($15^{\circ}C$) \circled3 The pattern of the blood flow of the finger and heart rate was different between E-group and C-group.