본 논문은 공간 부호화 패턴들을 이용하여 3차원 얼굴 정보를 정확하게 측정하기 위하여 초기 얼굴 패턴 영상으로부터 이미지 패턴을 검출하기 위한 새로운 알고리즘을 제안한다. 획득된 영상이 불균일하거나 패턴의 경계가 명확하지 않으면 패턴을 분할하기가 어렵다. 그리고 누적된 오류로 인하여 코드화가 되지 않는 영역이 발생한다. 본 논문에서는 이러한 요인에 강하고 코드화가 잘 될 수 있도록 FCM 클러스터링 방법을 이용하였다. 패턴 분할을 위하여 클러스터는 2개, 최대 반복횟수는 100, 임계값은 0.00001로 설정하여 실험하였다. 제안된 패턴 분할 방법은 기존 방법들(Otsu, uniform error, standard deviation, Rioter and Calvard, minimum error, Lloyd)에 비해 8-20%의 분할 효율을 향상시켰다.
분포형 수문모형인 WEP(Water and Energy transfer Processes)는 일본토목연구소의 물순환 해석 모형으로써, 짧은 구동시간에도 불구하고 물과 열에너지의 순환을 파악하는 데 효과적인 것으로 알려져 있다, 그러나 모의에 필요한 자료입력 과정이 매우 복잡하고 불편할 뿐 아니라 획득된 결과를 효율적으로 표현하지 못한다는 약점을 가지고 있어 활용도가 높지 않았다, WEP 사용성 향상에 관한 요구가 높아짐에 따라, WEP 전 후처리 프로그램인 WEP+가 개발되었다. WEP+의 개발은 WEP 모형에 대한 방대한 양의 입력 자료를 효과적으로 구축하고, 다양한 기능을 통해 모의 결과에 대한 분석을 용이하게 할 수 있도록 하여 사용자가 직관적으로 모형을 적용할 수 있도록 하는데 그 목적을 두고 있다. WEP+는 기존 WEP의 복잡한 입력과정을 체계화 하여, 사용자가 쉽게 접근할 수 있도록 설계되었으며, 입력 자료의 편집기능을 도입하였다. 또한 복잡하게 연관된 매개변수들의 적합성 여부를 사전에 점검 할 수 있는 기능을 부여하여 모의 도중 오류가 발생하거나 잘못된 모의 결과를 생산할 가능성을 최소화 하고자 하였다. 모의 결과에 대해서는 하천 유출, 지표면 유출, 지하수 유출, 토양수분, 지하수위, 증발산 등 세부 수문요소에 대한 모의 결과를 지점별 시계열과 전체 유역에대한 분포형 자료로 확인할 수 있다. 본 연구에서는 새로 개발된 WEP+ 각 모듈의 기능과 인터페이스를 살펴보고 적용사례를 중심으로 결과분석과 활용방법에 대해 고찰해 보도록 한다.
One of the most important procedure in stereo DEM generation is the stereo matching process which finds the conjugate pixels in a pair of stereo imagery. In order to be found as conjugate pixels, the pixels should have distinct spatial feature to be distinguished from other pixels. However, in the homogeneous areas such as water covered or forest canopied areas, it is very difficult to find the conjugate pixels due to the lack of distinct spatial feature. Most of erroneous elevation values in the stereo DEM are produced in those homogeneous areas. This paper presents a simple method for improving the quality of stereo DEM utilizing the texture filters. An entropy filter was applied to one of the input stereo imagery to extract very homogeneous areas before stereo matching process. Those extracted homogeneous areas were excluded from being candidates for stereo matching process. Also a statistical texture filter was applied to the generated elevation values before the interpolation process was applied in odor to remove the remaining anomalous elevation values. Stereo pair of SPOT level 1B panchromatic imagery were used for the experiments. The results showed that by utilizing the texture filters as a pre and a post processor of stereo matching process, the quality of the stereo DEM could be dramatically improved.
The structural intensity analysis, which calculates vibration energy flow from vibratory velocity and internal force of a structure, can give information on sources' power, dominant transmission path and sink of vibration energy. In this study, we present a system for structural intensity analysis and visualization to apply for anti-vibration design of ship structures. The system calculates structural intensity from the results of forced vibration analysis and visualize the intensity using a general purpose finite element analysis program MSC/Nastran and its pre- and post-processor program. To demonstrate the analysis and visualization capability of the presented system, we show and discuss the results of structural intensity analysis for a cross-stiffened plate and a 70,500 OW crude oil tanker
위성 영상 촬영 후 지상국에 전송된 영상을 이용하여 최종 위성 영상을 획득하기 위해 많은 영상 전/후 처리 과정이 수반된다. 전/후처리 과정 중 레벨 1R 영상에서 레벨 1G 영상으로 변환 시 기하 보정은 필수적으로 요구된다. 기하 보정 알고리즘에서는 보간 기법을 필연적으로 사용하게 되며, 보간 기법의 정확도에 따라서 레벨 1G 영상의 품질이 결정된다. 또한, 레벨 프로세서에서 수행되는 보간 알고리즘의 고속화 역시 매우 중요하다. 본 논문에서는 레벨 1R에서 레벨 1G로 변환 시 기하 보정에 필요한 경량화된 심층 컨볼루션 신경망 기반 보간 기법에 대해 제안하였다. 제안한 기법은 위성 영상의 해상도를 2배 향상하며, 빠른 처리 속도를 위해 경량화된 심층 컨볼루션 신경망으로 딥러닝 네트워크를 구성하였다. 또한, panchromatic (PAN) 밴드 정보를 활용하여 multispectral (MS) 밴드의 영상 품질 개선이 가능한 피처 맵 융합 방법을 제안하였다. 제안된 보간 기술을 통해 획득한 영상은 기존의 딥러닝 기반 보간 기법에 비해 정량적인 peak signal-to-noise ratio (PSNR) 지표에서 PAN 영상은 약 0.4 dB, MS 영상은 약 4.9 dB 개선된 결과를 보여주었으며, PAN 영상 크기 기준 36,500×36,500 입력 영상의 해상도를 2배 향상된 영상 획득 시 기존 딥러닝 기반 보간 기법 대비 처리 속도가 약 1.6배 향상됨을 확인하였다.
본 연구에서는 시공성을 고려한 변단면을 갖는 합성형 강상자형교의 최소비용을 구하기 위한 자동화 최적설계 프로그램을 개발하였다. 강상자형교 설계에 필요한 설계 제약조건은 도로교 표준 시방서를 비롯한 각종 설계기준과 실무자의 경험을 바탕으로 정식화하였다. 최적화의 효율성을 위해 강상자형교의 특성을 고려한 제약조건 소거기법, 설계 변수 연결기법, 응력 재해석 기법을 적용하였다. 본 연구에서 개발된 프로그램은 구조해석 모듈, 최적설계모듈, 사용자의 입력 편의를 위한 전처리모듈 설계 업무자동화를 위한 후처리모듈로 구성되어 있으며, 구조해석은 신뢰성이 입증된 상업용 구조해석 프로그램인 RM-SPACEFRAME을 이용하여 격자모델에 대해 실시하도록 하였다. 또한 개발된 최적 설계 프로그램의 효율성과 실용성을 확인하기 위하여 몇 가지의 수치예제를 적용하였다. 본 연구에서 개발된 최적설계 시스템은 향후 타 형식의 교량에 최적설계 프로그램의 모형으로 활용될 수 있으리라 사료된다.
본 논문에서는 기존의 유한요소 프로그램을 이용하여 솔레노이드 밸브의 해석을 용이하게 하는 프로그램 개발에 대해서 다루었다. 비례솔레노이드 밸브에서 정확한 해를 얻기 위해서는 이론적인 식보다 기존의 유한요소 해석툴을 이용하는 것이 유리하며, 이때 사용자의 편의성을 위해서 솔레노이드의 형상을 삼각형, 사각형 등의 간단한 도형의 조합이라고 가정하여 모델링하도록 하였다. 이러한 가정을 사용하여 개발된 솔레노이드 해석 프로그램은 사용자가 솔레노이드의 유한요소 모델을 쉽게 생성할 수 있도록 해주었다. 개발된 프로그램의 유용성을 검증하기 위해 실제 솔레노이드 밸브에 대한 해석을 수행하였으며, 해석결과 개발된 프로그램은 솔레노이드 밸브의 비례특성을 잘 해석할 수 있음을 알 수 있었다.
연구목적: 파이프는 기계, 전자, 전기, 플랜트 등 많은 산업 분야에서 응용기기로 널리 사용되고 있으며, 소방, 화학 등 안전 관련 분야에서도 널리 사용되고 있다. 제품의 다양화에 따라 배관 분야에서도 기술의 중요성이 높아지고 있습니다. 특히 기존 동관을 스테인리스강으로 변경하는 경우 구조해석이나 유동 해석을 통해 안전성과 유동 특성을 평가할 필요가 있다. 연구방법: 본 연구에서는 자체 개발한 일체형 삽입형 커넥터인 6.35 및 15.88 소켓 모델의 구조적 안정성을 FEM을 이용하여 조사하였다. 구조해석은 전처리기로 hyper mesh, 후처리기로 HYPER VIEW, 솔버로 LS-DYNA를 사용하였다. 연구결과: 응력해석 결과 6.35 소켓의 경우 훅, 훅홀더 및 훅가드에서의 최대응력은 각각 95.02MPa, 19.59MPa 및 44.01MPa였으며, 15.88 소켓의 경우 각각 127.7MPa, 40.09MPa 및 45.23MPa로 나타났다. 결론: 두 소켓 모델의 응력분포를 비교하면 상대적으로 외경이 큰 15.88 소켓에서의 응력이 전반적으로 크게 나타나고 있으나 각 소재의 항복응력보다는 현저히 낮아 두 모델 모두 구조적인 안전성은 문제가 없는 것으로 나타났다.
환경모델링 기법은 비선형 오염유출현상을 구조화하여 배출특성 규명 및 정책대안의 영향예측 도구로서 활용도가 증가하고 있다. 반면 복잡한 입력 매개변수의 구성은 모형운영에 있어 비정량적 수치의 적용가능성을 내포하고 있다. 이러한 한계성을 극복하기 위해 최근 들어 GIS와 정보기술의 연계를 통한 자료관리 및 모형 매개변수 산출을 위한 연구들이 활발히 진행 중에 있다. 이에 본 연구의 목적은 NGIS사업을 통해 축척된 지형공간 자료와 GIS의 공간분석기능을 연계하여 유역 오염유출모형인 HSPF의 운영정보 생성을 지원하는 정보시스템을 개발하는데 있다. 주 연구내용은 시스템 분석 및 설계, 기초 데이터 수집과 DB 구축, 지형 매개변수 산정을 위한 GIS-HSPF의 통합 인터페이스 구축이다. 개발된 KBASIN-HSPF는 EPA에 의해 개발된 BASIN의 유역분할, 하천망생성, 지형특성계수 산정 기능과 함께 우리나라의 지형 오염원 기상정보의 저장구조를 고려한 데이터 모델링, Thiessen망에 준한 강우자료 보정 그리고 HSPF 모형운영정보 생성 및 전환기능을 포함하고 있다. KBASIN-HSPF는 기존의 오염유출모델링을 위해 자료준비부터 정보연계, 모형운영까지 분산된 환경에서 수행되었던 것을 통합환경하에서 진행함으로써 정보의 질적보장과 정보전환의 표준화방안을 제시하는 정보분석시스템이다.
The use of thin plate increases due to the need for light weight in large ship. Thin plate is easily distorted and has residual stress by welding heat. Therefore, the thin plate should be carefully joined to minimize the welding deformation which costs time and money for repair. For one effort to reduce welding deformation, it is very useful to predict welding deformation before welding execution. There are two methods to analyze welding deformation. One is simple linear analysis. The other is nonlinear analysis. The simple linear analysis is elastic analysis using the equivalent load method or inherent strain method from welding experiments. The nonlinear analysis is thermo-elastic analysis which gives consideration to the nonlinearity of material dependent on temperature and time, welding current, voltage, speed, sequence and constraint. In this study, the welding deformation is analyzed by using thermo-elastic method for PCTC(Pure Car and Truck Carrier) which carries cars and trucks. PCTC uses thin plates of 6mm thickness which is susceptible to welding heat. The analysis dimension is 19,200mm(length) * 13,825mm(width) * 376mm(height). MARC and MENTAT are used as pre and post processor and solver. The boundary conditions are based on the real situation in shipyard. The simulations contain convection and gravity. The material of the thin block is mild steel with $235N/mm^2$ yield strength. Its nonlinearity of conductivity, specific heat, Young's modulus and yield strength is applied in simulations. Welding is done in two pass. First pass lasts 2,100 second, then it rests for 900 second, then second pass lasts 2,100 second and then it rests for 20,000 second. The displacement at 0 sec is caused by its own weight. It is maximum 19mm at the free side. The welding line expands, shrinks during welding and finally experiences shrinkage. It results in angular distortion of thin block. Final maximum displacement, 17mm occurs around welding line. The maximum residual stress happens at the welding line, where the stress is above the yield strength. Also, the maximum equivalent plastic strain occurs at the welding line. The plastic strain of first pass is more than that of second pass. The flatness of plate in longitudinal direction is calculated in parallel with the direction of girder and compared with deformation standard of ${\pm}15mm$. Calculated value is within the standard range. The flatness of plate in transverse direction is calculated in perpendicular to the direction of girder and compared with deformation standard of ${\pm}6mm$. It satisfies the standard. Buckle of plate is calculated between each longitudinal and compared with the deformation standard. All buckle value is within the standard range of ${\pm}6mm$.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.