• Journal of the Korea Institute of Building Construction
• /
• v.15 no.6
• /
• pp.631-639
• /
• 2015

In the unit modular construction, the unit module prefabricated in a factory with a high level of accuracy does not fit completely onto the ground-joint junction due to the low accuracy of the ground work. This difference in the level of accuracy can cause diverse problems, such as twisting the upper unit modules and loosening the connection between the module and the footing. On this background, the aim of this study is to develop a technique for adjusting the height of the prefabricated individual footing. To accomplish the aim, a height adjustment method using bolts and nuts is proposed, and a shop drawing and the construction sequence are also presented in this study. The structural safety is verified through a structure simulation. In the future, research will be conducted on a mock-up test of the height adjustment method developed in this study, and an analysis of economic feasibility will be performed in order to verify its constructability and usability.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.2
• /
• pp.229-235
• /
• 2019

The importance of pre-service teachers' curriculum that can run K12 school SW education is raised. However, there is insufficient study on the standard of SW curriculum for pre-service teachers in domestic. In this study, we analyzed domestic and foreign cases based on four kinds of contents knowledge. Domestic cases were found to be concentrated on curriculum contents of education and teaching methods. Through the analysis of cases in domestic and abroad, we presented the content of SW education based on knowledge of teaching contents for preliminary teachers. The main contents are all four areas, and the curriculum contents and the teaching method are emphasized the most, and the SW subject education experts are asked for the feasibility study. The results of the questionnaire survey showed that although the validity and consensus exceeded the standard, the CVR value for the student management field was lower than the standard value.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.221-227
• /
• 2022

This study purports to deal with so-called basic income policy that Korea society has paid a great amount of attention to in welfare policy area. As an introduction, the definitions of basic income policy, and her natures and characteristics, and ideological foundation will be covered. Then, this study will discuss current debating issues upon basic income policy around the world such as basic income policy vs pre-existing social security systems, basic income policy and labor supply, the potential effect of basic income policy upon income redistribution, and feasibility of basic income as an actual policy. In conclusion, this study will investigate major criticisms on basic income policy and suggest viable paths that interested researcher should take for further study on basic income.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.5
• /
• pp.3045-3050
• /
• 2013

Purpose: Hepatic resection is arguably the preferred treatment for huge hepatocellular carcinoma (H-HCC). Estimating the remnant liver volume is therefore essential. This study aimed to evaluate the feasibility of using computer-assisted volumetric analysis for this purpose. Methods: The study involved 40 patients with H-HCC. Laboratory examinations were conducted, and a contrast CT-scan revealed that 30 cases out of the participating 40 had single-lesion tumors. The remaining 10 had less than three satellite tumors. With the consensus of the team, two physicians conducted computer-assisted 3D segmentation of the liver, tumor, and vessels in each case. Volume was automatically computed from each segmented/labeled anatomical field. To estimate the resection volume, virtual lobectomy was applied to the main tumor. A margin greater than 1 cm was applied to the satellite tumors. Resectability was predicted by computing a ratio of functional liver resection (R) as (Vresected-Vtumor)/(Vtotal-Vtumor) x 100%, applying a threshold of 50% and 60% for cirrhotic and non-cirrhotic cases, respectively. This estimation was then compared with surgical findings. Results: Out of the 22 patients who had undergone hepatectomies, only one had an R that exceeded the threshold. Among the remaining 18 patients with non-resectable H-HCC, 12 had Rs that exceeded the specified ratio and the remaining 6 had Rs that were < 50%. Four of the patients who had Rs less than 50% underwent incomplete surgery due to operative findings of more extensive satellite tumors, vascular invasion, or metastasis. The other two cases did not undergo surgery because of the high risk involved in removing the tumor. Overall, the ratio of functional liver resection for estimating resectability correlated well with the other surgical findings. Conclusion: Efficient pre-operative resectability assessment of H-HCC using computer-assisted volumetric analysis is feasible.

• Geomechanics and Engineering
• /
• v.11 no.2
• /
• pp.177-195
• /
• 2016

To secure the stability of geotechnical infrastructures and minimize failures during the construction process, a number of support systems have been introduced in the last several decades. In particular, stabilization methods using steel bars have been widely used in the field of geotechnical engineering. Rock bolt system is representative support system using steel bars. Pre-stressing has been applied to enhance reinforcement performance but can be released because of the failure of head or anchor sections. To overcome this deficiency, this paper proposes an innovative support system that can actively reinforce the weak ground along the whole structural element by introducing an active tension bolt containing a spring unit to the middle of the steel bar to increase its reinforcement capacity. In addition, the paper presents the support mechanism of the active tension bolt based on a theoretical study and employs an experimental study to validate the performance of the proposed active tension bolt based on a down-scaled model. To examine the feasibility of the active tension unit in a pillar, the paper considers a pullout test and a small-scale experimental model. The experimental results suggest the active tension bolt to be an effective support system for pillar reinforcement.

• The Journal of Korean Medicine
• /
• v.37 no.3
• /
• pp.74-86
• /
• 2016

Objectives: This article aims to review clinical studies related to traditional Korean medicine (TKM) for cancer-related cognitive impairment (CRCI) up to date. Methods: EMBASE, Pubmed and eight Korean databases were searched for clinical studies about TKM for CRCI up to July 2016. We selected articles about subjects with cancer, using TKM interventions including acupuncture, moxibustion or herbal medicine, containing assessment about cognitive function. Results: Two randomized controlled trials (RCTs) and one randomized controlled feasibility study were included. Selected studies were containing assessments about cognitive function but not as primary outcomes. The three studies included one acupuncture study and two herbal-medicine studies. Only one herbal-medicine study showed improvement in cognitive function. Conclusions: Few clinical studies mainly focusing CRCI treated with TKM have been performed and have shown contradictory results until now. Future studies should be performed considering findings from pre-clinical and clinical studies altogether, and they should be controlled to minimize risk of bias thorough out overall courses of designing, conducting and reporting them.

• Research in Community and Public Health Nursing
• /
• v.28 no.2
• /
• pp.206-215
• /
• 2017

Purpose: This study aimed to verify the predictive validity of Comprehensive Korean Frailty Instrument (CKFI) among older adults. Methods: A secondary analysis of data from a prospective cohort study was conducted. Frailty was determined in older adults (N=9,188) according to the data in 2008 and the effects of frailty on adverse outcomes (such as institutionalization and death) were evaluated according to the data in 2011. The Cardiovascular Health Study (CHS) index was used to compare with the predictive validity of CKFI. Results: The prevalence of frailty was 26.3%. With the CKFI, the frail group had a higher risk of negative health outcomes compared to the robust and pre-frail groups after three years. The two of the highest risks identified using the CKFI and CHS index were institutionalization (5.522 times higher) and mortality (3.210 times higher). For both instruments, the survival analysis revealed that the risk of death increased as the degree of frailty increased. Conclusion: The CKFI consisting of self-report items and multidimensional aspects of frailty can be used as a simple instrument for assessing the frailty of older adults residing in a local community in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1057-1061
• /
• 2007

In this study, we investigated the properties of ZnO thin films prepared by layer-by-layer method in RF magnetron sputtering system using AlAs and ZnO targets. Effects of $H_2O_2$ dip prior to thermal treatment were studied as well. Either n-type or p-type films were observed in our study depending on the annealing conditions. It thus indicates the feasibility of arbitrarily modifying the conductivity type. At the same time, it also implies the thermal instabilities of the film properties. Property measurements after stressing the films up to 144 hours showed that thermal variations of properties nay be suppressed by pre-treatment in 30% $H_2O_2$ for 1 min.

• Advances in aircraft and spacecraft science
• /
• v.3 no.1
• /
• pp.29-43
• /
• 2016

Composite materials are rapidly gaining popularity as an alternative to metals for structural and load bearing applications in the aerospace, automotive, alternate energy and consumer industries. With the advent of thermoplastic composites and advances in recycling technologies, fully recyclable composites are gaining ground over traditional thermoset composites. Stamp forming as an alternative processing technique for sheet products has proven to be effective in allowing the fast manufacturing rates required for mass production of components. This study investigates the feasibility of using the stamp forming technique for the processing of thermoplastic, recyclable composite materials. The material system used in this study is a self-reinforced polypropylene composite material (Curv$^{(R)}$). The investigation includes a detailed experimental study based on strain measurements using a non-contact optical measurement system in conjunction with stamping equipment to record and measure the formability of the thermoplastic composites in real time. A Design of Experiments (DOE) methodology was adopted to elucidate the effect of process parameters that included blank holder force, pre heat temperature and feed rate on stamp forming. DOE analyses indicate that feed rate had negligible influence on the strain evolution during stamp forming and blank holder force and preheat temperature had significant effect on strain evolution during forming.

• Journal of Korea Technology Innovation Society
• /
• v.19 no.1
• /
• pp.29-47
• /
• 2016

The government has been implementing the preliminary feasibility study to examine previously a plan of the national R&D program submitted by each government ministry or institution and decide whether to reflect its budget. However, although R&D investments obviously have a different contribution depending on the different types of project, the current system applies the average R&D contribution rate to whole industry across the board in order to estimate benefits of the creating value from the R&D activity. This system in turn will cause a distorted result in the economic feasibility analysis. Therefore, this paper conducts an empirical analysis on the ICT R&D contribution for the creating value added, on behalf of all industries, through the growth accounting method and explores an applicability of the differential R&D contribution rate as an alternative by comparing to the existing R&D contribution rate. The result of this paper shows the ICT R&D contribution rate is 48.2%, and we can find out there is a significant difference compared to the existing R&D contribution rate. In light of this, it is necessary to adopt carefully the differentiated R&D contribution rate considering project characteristics.