• Journal of the Institute of Electronics Engineers of Korea CI
• /
• 제42권6호
• /
• pp.29-36
• /
• 2005

RFID(Radio Frequency Identification) will be used for recognizing things and offering distinctive information in Ubiquitous environment. But we are not ready to provide security service to RFID. Therefore we propose the approach of safe RFID system which provides the solution for eavesdrop, forgery, and modification based on Pre-Distribution protocol and RC5 security algorithm. First We distributes the secret key to the Tag with the Reader that is major subject on RFID system using Pre-Distribution protocol. Then we will provide to various security services and privacy protection using RC5 security algorithm. The proposed safe RFID system simulated on ATmega128 evaluate environment.

• Industrial Engineering and Management Systems
• /
• 제13권3호
• /
• pp.297-303
• /
• 2014

Stock pre-positioning is one of the most important decisions for preparing the stage of emergency logistics planning. In this paper, a mixed integer model for stock pre-positioning is derived to support an emergency disaster relief response against the event of earthquake. A maximum response time limit, budget availability, multiple item types, and capacity restrictions are considered. In the model, the decision of the distribution centers to cover a disaster area and the amount of supplies to be stocked in each distribution center are simultaneously determined to maximize the total expected relief demand of the disaster areas covered by the existing distribution centers. The proposed model is applied to a real case with 33 disaster areas and 16 distribution centers in Indonesia. Several sensitivity analyses are conducted to estimate the fluctuation on the emergency stock pre-positioning planning by changing the maximum response time and budgets.

• Journal of Korean Society of Water and Wastewater
• /
• 제19권5호
• /
• pp.655-659
• /
• 2005

Pre-filter system that was consisted of wasted-tire, non-woven fabrics, and sponge was developed as a primary treatment process prior to rainwater reservation or a pre-treatment process of rainwater reuse system for reclamation. By using this system, SS concentration, TOC, COD, and turbidity could decreased by 86.7%, 62.6%, 69.1% and 66.5%, respectively. From the results of particle size distribution of treated water, the particles over than $30{\mu}m$ of diameter were completely removed by pre-filter system. But 90% of particles less than $20{\mu}m$ of diameter were passed through pre-filter. Optimal depth of wasted-tire and non-woven fabrics were 15cm and 2.4cm, respectively. Pre-filter system was considered as an effective alternative for pre-treatment of rainwater including non-point pollutants and it could be also applied for the treatment of combined sewer overflow (CSO).

• Journal of Distribution Science
• /
• 제17권5호
• /
• pp.5-17
• /
• 2019

Purpose - This study aims to exploratorily analyze relationship among pressure on business failure, social safety net perception, and entrepreneurial intention targeting potential business founders - pre-entrepreneurs and re-entrepreneurs. Research design, data, and methodology - Out of 450 collected surveys, 386 were used for analysis. Among these, 216 were from pre-entrepreneurs and 170 were from re-entrepreneurs. Frequency analysis, reliability and validity analysis, and regression analysis were performed. Results - In analysis of pre-entrepreneur and re-entrepreneur's pressure on business failure and social safety net perception, objective environment perception - a subfactor of social safety net perception - had statistically significant difference between the two potential entrepreneur groups. Conclusions - We categorized potential entrepreneurs into pre-entrepreneurs and re-entrepreneurs. Also, the current study suggests importance of social safety net to vitalize food service business startup by validifying its mediating effect between pressure on business failure and attitude towards restaurant business establishment. This research also established groundwork for future studies on ways to improve entrepreneurial intention or startup business sustainability by deducing social safety net perception difference between pre-entrepreneurs and re-entrepreneurs. This study was able to analyze relationship between those two groups in terms of entrepreneurial intention and startup business sustainability.

• Journal of International Academy of Physical Therapy Research
• /
• 제9권3호
• /
• pp.1543-1548
• /
• 2018

The purpose of this study was to analyze the effects of manual therapy on lower extremity alignment in pelvic malalignment. The subjects were 20 adults with pelvic malalignment. They were divided into two groups: manual therapy group (n=10) and stretching exercise group (n=10). Each group performed the intervention two times per week for 4 weeks. The lower extremity alignment was measured by pelvic deviation, functional leg length inequality, and plantar pressure distribution, which were measured between pre- and post-test. In the result of pelvic deviation, there was a significant difference between the pre- and post-test of the manual therapy group and stretching exercise group. In the result of the functional leg length inequality, there was a significant difference between the pre- and post-test of the manual therapy group. In the result of plantar pressure distribution, there was a significant difference between the pre- and post-test of the manual therapy group. These findings suggest manual therapy improves the pelvic deviation, functional leg length inequality, and plantar pressure distribution in the pelvic malalignment.

• Korea-Australia Rheology Journal
• /
• 제17권3호
• /
• pp.125-130
• /
• 2005

Coalescence process of binary immiscible fluid mixtures having bimodal size distributions, prepared by mixing two pre-sheared samples at different shear rates, ${\gamma}_{pre1}\;and\;{\gamma}_{pre2}$, under shear flow at a final shear rate, ${\gamma}_f$, are examined by transient shear stress measurements and microscopic observations in comparison with the results for simply pre-sheared samples having narrow size distributions (unimodal distribution samples). Component fluids are a silicone oil (PDMS) and a hydrocarbon-formaldehyde resin (Genelite) and their viscosities are 14.1 and 21.0 $pa{\cdot}sec$ at room temperature $(ca.\;20^{\circ}C)$, respectively. The weight ratio of PDMS: Genelite was 7:3. Three cases, $({\gamma}_{pre1}=7.2sec^{-1},\;{\gamma}_{pre2}=12.0sec^{-1}\;and\;{\gamma}_f=2.4sec^{-1}),\;({\gamma}_{pre1}=0.8sec^{-1},\;{\gamma}_{pre2}=4.0sec^{-1}\;and\;{\gamma}_f=2.4sec^{-1}),\;and\;({\gamma}_{pre1}=7.2sec^{-1},\;{\gamma}_{pre2}=12.0^sec^{-1}\;and\;{\gamma}_f=7.2sec^{-1})$ the first case, transient shear stress did not show any significant difference but domains larger than the initial state are observed at short times. In the latter cases, there exist undershoot of shear stress, reflecting existence of deformed large domains, which is confirmed by the direct observation. It is concluded that coalescence between large and small domains more frequently occur than coalescence between the domains with similar size in the bimodal distribution samples.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• 제29권2호
• /
• pp.119-128
• /
• 2023

This study was examined for investigating the quality changes of spring kimchi cabbage under various treatments (pre-drying/pre-cooling, packaging types, and stacking and loading in container and pallete in the storage room) during cold storage. The results showed that control (upward stacking without pre-drying/pre-cooling and HDPE or PVC film cover) was increased significantly in weight loss and trimming loss, compared to other treatments such as DPDH (downard stacking + pre-drying + HDPE), DPDP (downard stacking + pre-drying + PVC), DPCH (downnard stacking + pre-cooling + HDPE), and UPCH (upward stacking + pre-cooling +HDPE) during storage for three months. In Sensory evaluation, judging from marketable properties, the desirable appearance of spring kimchi cabbage with the modified pallet-unit MA packed, PE, and PVC film wrapping could be maintained until 9 weeks after pre-drying/pre-cooling. Meanwhile, the control without any treatments after 6 weeks, the sensory score was declined, significantly. In general, the low temperature (10℃ and 2℃) of pre-treatment with combination of plastic film packaging in spring kimchi cabbage storage could inhibit the physiological activity and reduce the direct exposure of environmental cold air in the storage. Therefore, these two variables were the key points for extending the shelf-life of spring kimchi cabbage.

• Journal of KIISE:Information Networking
• /
• 제33권3호
• /
• pp.193-200
• /
• 2006

The security feature is essential in wireless sensor network such as intrusion detection or obstacle observation. Sensor nodes must have shared secret between nodes to support security such as privacy. Many methods which provide key pre-distribution need too many keys or support poor security. To solve this problem, probabilistic key pre-distribution is proposed. This method needs a few keys and use probabilistic method to share keys. However, this method does not guarantee key sharing between nodes, and neighbor nodes nay not communicate each other. It leads to waste of network resource such as inefficient routing, extra routing protocol. In this paper, we propose new key distribution method using quorum system which needs a few keys and guarantee key sharing between nodes. We also propose extension of the method which needs fewer keys and guarantee key sharing when node deployment knowledge is well known.

• Journal of Korea Foundry Society
• /
• 제28권1호
• /
• pp.25-30
• /
• 2008

To develop a functionally graded microstructure of cylindrical liner, effect of centrifugal casting parameters such as pouring temperature of hyper-eutectic Al-Si alloy melt, mold pre-heating temperature, and rotational frequency of mold on distribution of primary Si particles across wall thickness were investigated. Segregation tendency of Si particles toward inner side of cylindrical liner increased as the increase of rotational frequency of mold, pouring temperature of melt and mold pre-heating temperature. Especially, distribution density of primary Si particles within 1.5 mm from inner surface of cylindrical liner was above 35% under the centrifugal casting condition of $750^{\circ}C$ melt pouring temperature, $300^{\circ}C$ mold pre-heating temperature, and 2500 rpm mold rotational frequency.

• Communications for Statistical Applications and Methods
• /
• 제21권6호
• /
• pp.501-512
• /
• 2014

Stylized facts on asset return are fat-tail, asymmetry, volatility clustering and structure changes. This paper simultaneously captures these characteristics by introducing a multi-regime models: Finite mixture distribution and regime switching GARCH model. Analyzing the daily KOSPI return from $4^{th}$ January 2000 to $30^{th}$ June 2014, we find that a two-component mixture of t distribution is a good candidate to describe the shape of the KOSPI return from unconditional and conditional perspectives. Empirical results suggest that the equality assumption on the shape parameter of t distribution yields better discrimination of heterogeneity component in return data. We report the strong regime-dependent characteristics in volatility dynamics with high persistence and asymmetry by employing a regime switching GJR-GARCH model with t innovation model. Compared to two sub-samples, Pre-Crisis (January 2003 ~ December 2007) and Post-Crisis (January 2010 ~ June 2014), we find that the degree of persistence in the Pre-Crisis is higher than in the Post-Crisis along with a strong asymmetry in the low-volatility (high-volatility) regime during the Pre-Crisis (Post-Crisis).