• 한국전기전자재료학회논문지
• /
• 제18권10호
• /
• pp.896-901
• /
• 2005

The microstructure and electrical properties of praseodymium-based zinc oxide varistors were investigated at various cobalt oxide contents in the range of $0.5{\~}5.0 mol\%$. The ceramic density increased in the range of $5.25{\~}5.55 g/cm^3$ with increasing cobalt oxide content. The varistor doped with cobalt oxide of $1.0 mol\%$ exhibited the highest nonlinearity, with 66.6 in nonlinear exponent and 1.2 $\mu$A in leakage current. The donor concentration, density of interface states, and tamer height were in the range of $(1.06{\~}1.69){\times}10^{18}/cm^3$, $(3.11 {\~}3.56){\times}10^{12}/cm^2$, and 0.80${\~}$1.07 eV, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 하계학술대회 논문집 C
• /
• pp.1342-1344
• /
• 1997

Zinc oxide varistors which contain rare earth metal oxides have been developed. These Varistors are widely used for low voltage surge-protection devices and high voltage arresters for electric power stations. The characteristics of varistors with praseodymium oxide as a principal additive are discussed. A two-phase microstructure with an intergranular phase between the ZnO grains.

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.842-848
• /
• 1998

The stability of paraseodymium-based zinc oxide varistor consisting of Zn-Pr-Co-Cr-Y oxide was investigated according to yttria additives under different stress conditons, such as 0.8V\ulcorner\ulcorner/373K/12h and 0.85V\ulcorner\ulcorner/393K/12h. Wholly, all varistor after the stress showed nearly symmetric and stable I-V characteristics. Particularly, in the case of 2.0mol% and 4.0mol% yttria-added varistor showing a good I-V characteristics, the varation rate of varistor voltage were less 1% and that of nonlinear coefficient were about degree of 5%, and what is remarkable, leakage current with increasing stress time during the applied stress was almost constant. It the light of these facts, it is estimated that varistor constituents having 2.0mol% and 4.0mol% yittria, respectively, will be utilized to various application fields.

• The Korean Journal of Ceramics
• /
• 제5권4호
• /
• pp.357-362
• /
• 1999

ZnO varistors containing cobalt, praseodymium and calcium oxides were prepared. The current-voltage charcteristics and microstructures of the specimens were investigated with respect to calcium addition and sintering temperature. The potential barrier heights and the carrier densities were estimated from C-V relations. The compatibility of Ag-Pd as an internal electrode for multilayer chip varistor was also examined.

• Korean Chemical Engineering Research
• /
• 제53권1호
• /
• pp.46-52
• /
• 2015

A leaching kinetics was conducted for the purpose of recovery of praseodymium in sulfuric acid ($H_2SO_4$) from REE slag concentrated by the smelting reduction process in an arc furnace as a reactant. The concentration of $H_2SO_4$ was fixed at an excess ratio under the condition of slurry density of 1.500 g slag/L, 0.3 mol $H_2SO_4$, and the effect of temperatures was investigated under the condition of 30 to $80^{\circ}C$. As a result, praseodymium oxide ($Pr_6O_{11}$) existing in the slag was completely converted into praseodymium sulfate ($Pr_2(SO_4)_3{\cdot}8H_2O$) after the leaching of 5 h. On the basis of the shrinking core model with a shape of sphere, the first leaching reaction was determined by chemical reaction mechanism. Generally, the solubility of pure REEs decreases with the increase of leaching temperatures in sulfuric acid, but REE slag was oppositely increased with increasing temperatures. It occurs because the ash layer included in the slag is affected as a resistance against the leaching. By using the Arrhenius expression, the apparent activation energy of the first chemical reaction was determined to be $9.195kJmol^{-1}$. In the second stage, the leaching rate is determined by the ash layer diffusion mechanism. The apparent activation energy of the second ash layer diffusion was determined to be $19.106kJmol^{-1}$. These relative low activation energy values were obtained by the existence of unreacted ash layer in the REE slag.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.447-452
• /
• 2003

산화물 핵연료의 리튬환원공정에서 생성되는 $Li_2O$와 희토류원소 산화물($RE_2O_3$)의 화학적 반응을 밝혔다. 스칸듐, 이트륨, 프라세오디뮴, 네오디뮴, 사마륨, 유러퓸, 가돌리늄, 이테르븀 및 루테튬의 산화물은 각각 어떤 $Li_2O$의 임계농도 이상에서 $Li_2O$와 반응하여 복합산화물($LiREO_2$)을 형성하고, 이들 산화물이 복합산화물을 형성하는 각각의 $Li_2O$ 임계농도는 0.1 wt%, 1.9 wt%, 5.3 wt%, 5.0 wt%, 3.0 wt%, 3.9 wt%, 2.9 wt%, 2.6 wt% 및 0.3 wt%로 나타났다. $CeO_2$ 및 란타늄 산화물은 $Li_2O$와 반응하지 않는 것으로 나타났다. 실험에서 얻은 이들 희토류원소 복합산화물의 LiCl 용융염에 대한 용해도는 매우 작았다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.312-316
• /
• 1999

I-V characteristics of Praseodymium-based ZnO varistor doped with $Nd_2O_3$ in the range 0.0-2.0mol% sintered at 130$0^{\circ}C$ and 135$0^{\circ}C$ were investigated. In the all sides, ZnO varistors sintered at $1300^{\circ}C$ exhibited much better varistor characteristics than that at 135$0^{\circ}C$. All ZnO varistors doped with $Nd_2O_3$ sintered at $1300^{\circ}C$ exhibited good varistor characteristics but particularly ZnO varistor doped with l.Omol% $Nd_2O_3$ exhibited the best characteristics, which the nonlinear is 65.2 and the leakage current is 4.5pA. It is estimated that ZnO varistor doped with l.Omol% $Nd_2O_3$ will begin to be sufficiently used as basic composition to fabricate a good varistor.

• E2M - 전기 전자와 첨단 소재
• /
• 제16권9호
• /
• pp.65.2-65
• /
• 2003

Praseodymium oxid ($Pr_2$$O_3$) thin films have been deposited on Si(100) substrates by metalorganic chemical vapor deposition using praseodymium tris-2,2,6,6-tetramethyl-3,5-heptandionate as source material. Film structural, morphological, and compositional characterizations have been carried out. Dielectric properties have been studied as well by capacitance-voltage and current-voltage measurements on metal-oxide-semiconductor capacitors of several areas. The $Pr_2$$O_3$ films have shown a dielectric constant = 23-25 and a leakage current density of $8.8{\times}10$-e $A/\textrm{mm}^2$ at ＋1 V.