• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.363-363
• /
• 2017

The NPK are known as macro elements that affect crop growth and yield. In 1989, Cambodia Agricultural Research and Development Institute (CARDI) gave a recommendation rate of fertilizer on rice production based on soil types. This recommended rate of NPK seems however relatively low as compared to farmers' practices nowadays and the amount in the neighboring countries. The CARDI recommended rate for Prateah Lang soil type is 50kg N, 25kg P2O5, 25kg K2O ha-1 while recent farmers' practice rates are 55 - 64kg N, 24 - 46kg P2O5, 30kg K2O ha-1. However, the overuse of chemical fertilizer will lead to un-preferable plant growth, insect pest, disease and economic yield. Thus, we examined the effect of different NPK application rates on the growth and yield components in Prateah Lang soil type in Takeo province to investigate appropriate rates for improving rice productivity with economic efficiency. This study was conducted from July to November during wet season in 2013. A multi-locational trial with 6 treatments (T0 - T5) of NPK rates in 5 locations (trial 1 - 5) with 3 replications was conducted. The different combinations of NPK application were employed from 0, 50, 60, 80, 100, 120kg N ha-1, 0, 25, 30 45, 60kg P2O5 ha-1 and 0, 15, 25, 30, 45kg K2O ha-1. Urea, DAP and KCl were used for fertilization. Split application was employed [basal: 20% of N, 100% of P and K, top dressing-1st: 40% of N (30DAT), 2nd: 40% of N (PI stage)]. Three-week-old seedlings of var. Phka Rumdoul were transplanted with 2 - 3 seedlings hill-1 with $20cm{\times}20cm$ spacing. Plant length, tiller number at the maximum tillering stage and yield components were measured. The different rates of NPK application affected some yield components. The panicle number per hill was the most important key component followed by the spikelet number per panicle. However, the other parameters such as the filled grain percentage and 1000 grains weight had small effect or weak relation with the yield. Although the panicle number per hill had a significantly positive correlation with the stem number per hill, it was not correlated with the percentage of productive culms. The variation in the grain yield among the 5 trials was small and the difference was not significant. Although the yield tended to be higher at higher N and P application, there was no significant difference above 60kg N and 30kg P2O5. The yield was the highest at 15, 30 and 45kg K2O followed by 25kg K2O. The relationships between N, P and the stem number per hill were significantly linear positive, though it was not linear between K and the stem number. From these results, to increase rice productivity in the target area, farmers' effort to increase N and P input rather than CARDI recommendation up to 60kg N and 30kg P2O5 will be sufficient considering economic efficiency. Besides, the amount of K application should be reconsidered.

• Horticultural Science & Technology
• /
• v.32 no.4
• /
• pp.427-433
• /
• 2014

Trellising is an important cultural practice that affects grape quality and yield. Some grape cultivars require different trellising under different climate and soil conditions. To find suitable trellis conditions for grape cultivar 'Cheongsoo', we measured growth and fruit characteristics with three different trellis systems: curtain, Geneva double curtain (GDC), and modified T. The maximum light exposure of clusters in the curtain, GDC, modified T trellis systems was 670, 1,654, and $1,649{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, respectively. However, there was no difference in air temperature among the three trellis systems. Net $CO_2$ assimilation rate at $1,500{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ light intensity was 13.4, 13.7, and $8.7{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ in curtain, GDC, and modified T trellis systems, respectively. Trunk cross section area (TCSA) and bud burst rate were not significantly different among the three systems. Shoot number was 31.3, 47.0, and 37.0 in curtain, GDC, and modified T trellis systems, respectively. The shoot length was higher (243.9 cm) in the modified T trellis system than in the single curtain (171.1 cm) and GDC (151.5 cm) systems. Interior leaf number and leaf layer number were higher in the GDC system, in which there are two primary branches, in comparison to the modified T and curtain systems, which utilize one primary branch. Primary leaf area and lateral leaf area were significantly higher in the modified T trellis system in comparison to the GDC system. Berry weight, length and diameter, and total soluble solids were not significantly different among the three trellis systems. However, cluster weight and cluster number per tree were significantly higher in GDC. Titratable acidity was significantly lower in GDC. Collectively, our data suggest that the GDC trellis system is preferable for grape 'Cheongsoo' to maintain fruit quality and quantity in Korea.

• Journal of Internet Computing and Services
• /
• v.14 no.6
• /
• pp.95-105
• /
• 2013

Recently, SME's Collaboration activities have become one of a vital factor for sustaining competitive edge. This is because of the rapidly changing and competitive market environment, and also to leverage performance by overcoming obstacles of having limited internal resources. Discussing about the effects and relationships of the firm's collaboration activities and its outputs are not new. However, as ICT and various technologies have been diffused into the traditional industries, boundaries and practice capabilities within the industries are becoming ambiguous. Thus contents of the products/services and their development methods are also go and come over the industries. Although many researchers suggested the relations of SME's collaboration activities and innovation performances, most of the previous literatures are focusing on broad perspectives of firm's environmental factors rather than considering various SME's idiosyncrasy factors such as their major product and customer types at once. Therefore, the purpose of this paper is to analyze how SME(Small Medium Enterprise)'s external collaboration activities by their idiosyncrasy act as an input to types of innovation performance. In order to analyze collaboration effects in detail, we defined factors that can represent the SME's business environment - Perceived importance of using external resources, Perceived importance of external partnership, Collaboration and Collaboration levels of Major Product types, Customer types and lastly the Firm Sizes. We have also specifically divided the performance of innovation types as product innovation and process innovation based on existing research. In this study, the empirical analysis is based on Probit Regression Model to observe the correlations with the impact of each SME's business environment and their activities. For the empirical data, 497 samples were collected which, this sample data was extracted from the 'Korean Open Innovation Survey' performed by ETRI(Korean Electronics Telecommunications Research Institute) in 2010. As a result, empirical test results indicated that the impact of collaboration varies depend on the innovation types (Product and Process Innovation). The Impact of the collaboration level for the product innovation tend to be more effective when SMEs are developing for a final product, targeting on for individual customers (B2C). But on the other hand, the analysis result of the Process innovation tend to be higher than the product innovation, when SMEs are developing raw materials for their partners or to other firms targeting on for manufacturing industries(B2B). Also perceived importance of using external resources has effected to both product and process innovation performance. But Perceived importance of external partnership was statistically insignificant. Interesting finding was that the service product has negative effects on for the process innovation performance. And Relationship between size of the firms and their external collaboration activities with their performance of the innovations indicated that the bigger firms(over 100 of employees) tend to have better for both product and process innovations. Finally, implications of the results can be suggested as performance of innovation can be varied depends on firm's unique business idiosyncrasy as well as levels of external collaboration activities. The Implication of this research can be considered for firms in selecting an appropriate strategy as well as for policy makers.

• Archives of design research
• /
• v.17 no.4
• /
• pp.177-190
• /
• 2004

The purpose of this study is to provide domestic small and medium manufacturing businesses with effective ways of introducing and promoting design management, earnestly, as a key strategy for raising corporate competitiveness. For the purpose, this researcher discussed the management property of small and medium businesses, the introducing process and method and the necessity of promoting design management in small and medium businesses. Then the researcher reviewed and analyzed existing empirical studies to know the current status of design introduction and design management promotion i domestic small and medium businesses. Results of the study can be described as below. Prerequisite to the successful introduction by domestic small and medium businesses of design management are three CEO determinations - the firm will to the necessity of design introduction, the firm conviction in design efficacy, and the clear recognition of the existential value of design - and the establishment of at least five infrastructures -design organization, CDO, designers, design policy, and design strategy. For the promoting and succeeding in the execution of design management, design management system should have established based on such determinations and infrastructures, and CEOs should have design management mind firmly established and driven and realized next activities in the process of product development. 1) Set the principle of design priority in a new product development and establish an appropriate production system and environment. 2) Decide a new design development as the top-priority task of management and then practice it in a strategic way. 3) Be positive in design investment while accepting design management as a concept related not to cost, but to investment. 4) Utilize design extensively under the understanding that design management has something to do with corporate design system as a whole. 5) Treat design as the most valuable resource of business under the recognition that design is the most important determinant of corporate competitiveness.

• Journal of Science Education
• /
• v.32 no.2
• /
• pp.1-16
• /
• 2008

The purpose of this study was to analyze about STS contents in the next generation science textbook for 10th grade according to curriculum revision 2007 and high school science textbooks focused on the Earth Science which were published according to the 7th curriculum. The contents of STS were analyzed by the STS topics of Yager(1989), Piel's standard(1981), and student activities by SATIS. The results of this study are the same as follows: 'The next generation science textbook' was shown that 20.9% is STS material amount in average by Yager's standard. 'High school science textbooks' were shown that 11.3% is STS material amount in average. Based on the STS topics by Yager's standard, most of STS content is focused on 'Relativity with local community', 'Application of science' and 'Cooperative work on real problems'. However, there is rare contents such as 'Multiple dimensions of science', 'Practice with decision-making strategies' and 'Evaluation concerned for getting and using information' in the next generation science textbook. In high school science textbooks were shown that 'Applicability of science' is the highest and 'Relativity with local community' is the next high contents. Based on the STS topics by Piel's standard, most of STS contents are focused on 'Environmental quality', 'Space research' and 'National defence' in the next generation science textbook. But high school science textbooks are focused on 'Natural resources' and 'Technology development'. The activities were analyzed by SATIS student activities. The major categories of activities included in the next generation science textbook were 'Investigation', 'Simulation' and 'Data analysis'. But, there were rare activities like 'Roleplaying', 'Research design' and 'Simulation' in high school science textbooks.

• The Korean Society of Law and Medicine
• /
• v.16 no.1
• /
• pp.155-190
• /
• 2015

The court sentenced meaningful decisions related to the medical service in 2014. The court assumed the negligence of medical staff in the accident if being broken while using the medical equipment for not an original purpose at the time of surgery and ruled that the compensation for damage can be recognized in recognition of the causal relationship between the explanation duty violation and side effect's happening when unproven surgery on safety is implemented regarding the duty of explanation, that in the case of cosmetic surgery, the subject on the duty of explanation needs to be expanded compared to the general medical practice and that the duty of explanation cannot be accepted for the range that cannot be expectable. Also, the court has provided the requirement and limitation of self-determination exercise in case of the crash between patient's self-determination and doctor's duty of care and has ruled that as automobile insurance contract is a contract with the insurance company to pay regarding liability for car accidents, treating patients and taking the insurance money is not illegal activity even for the unlicensed hospital violating the medical law while established. The judgment stating the opinion that medical practitioners cannot be punished according to the medical law prohibiting the receiving of rebate in case that medical practitioners did not receive benefit while the medical institution itself gained an unfair economic benefit also stands out. And the court has ruled that even if the medical institution who received a business suspension is closed, the suspension is still effective in case that the same operator opens a new medical institution in the same place, ruled on the requirement to conduct a medical service outside of the medical institution that the doctor opened and ruled that the administrative penalty cannot be conducted prior to the conviction on charge of violating the medical law.

• Journal of the Korean Society of Radiology
• /
• v.14 no.6
• /
• pp.841-848
• /
• 2020

In the field of radiation therapy using photon beams and electron beams, since each patient has a different sensitivity to radiation, skin side effects may occur even at the same dose. Therefore, if there is a risk of excessive dose to the skin, a dosimeter is attached to verify whether the correct dose is being investigated. However, since the skin dosimeter checks the attachment site visually by measuring a point dose, it is difficult to confirm an accurate dose distribution. As a result, the measurement and simulation errors of the material HgI₂ in the 6 MV photon beam were 3.73% and 5.24%, respectively, at the minimum thickness of 25 ㎛, and the material PbI₂ was 4.73% and 5.65%, respectively. On the other hand, as a result of the 6 MeV electron beam, the measurement and simulation errors of the material HgI₂ were 1.35% and 1.12%, respectively, at a minimum thickness of 25 ㎛, and the material PbI₂ showed relatively low attenuation error, 1.67% and 1.20%, respectively. Therefore, it was evaluated that the thickness of the photon beam within 25 ㎛ and the electron beam within 100 ㎛ is suitable to have a reduction rate error within 5%. This study presents a new research direction for a flexible dosimeter attached to the human body that is required in clinical practice and the construction conditions of a future skin dosimeter.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.8 no.2
• /
• pp.130-136
• /
• 2005

Purpose: The aim of this study was to evaluate the correlation among descriptions regarding one's stool, Bristol stool form scale and colon transit time (CTT) in children with gastrointestinal symptoms, along with the clinical significance of Bristol stool form scale. Methods: 489 patients treated in the pediatric department of Severance hospital with gastrointestinal symptoms between May 2002 to May 2004 were included. We analyzed their age, sex, verbal descriptions of stool, Bristol stool form types, and CTT measured by Metcalf's method. Results: 116 children were under 5 years of age, 202 children between 5.1~10, and 171 children 10 years of age or older. Their mean age was $8.2{\pm}3.9years$. Stools were described as loose in 65 children (13.3%), normal in 221 (45.2%), hard in 188 (38.4%), and mixed (loose+hard) in 15 (3.1%). According to Bristol stool form scale, 57 children(11.7%) were classified as type 1, 66 (13.5%) as type 2, 203 (41.5%) as type 3, 109 (22.3%) as type 4, 36 (7.4%) as type 5, 18 (3.7%) as type 6, and 1 (0.2%) as type 7. Their mean CTT was checked $35.9{\pm}19.5hours$. Though no significant relationship was observed between age and CTT (p=0.4), a significant relationship was noted among patient's stool description, Bristol stool form scale and CTT (p<0.001). However, concordance between stool description and Bristol stool form was relatively low in the loose stool group (29%) and normal stool group (37%) while high in the hard stool group (87%). Conclusion: Bristol stool form scale could be used in the estimation of CTT in clinical practice.

• Journal of Preventive Medicine and Public Health
• /
• v.20 no.1 s.21
• /
• pp.129-136
• /
• 1987

To determine the hepatitis 8 virus infection rate of the medical school students and appropriate time for immunization with hepatitis B vaccine,355 students in the 1st, 2nd and 3rd grades of Medical School of Kyungpook National University who had not been vaccinated and volunteered to participate in this study were tested for HBsAg, anti-HBs and anti-HBc with radioimmunoassay method (Abbott Lab. kit). A questionnaire was administered to ask the history of transfusion, acupuncture and surgery. HBsAg positive students were retested 16 months after the initial test. Overall HBsAg positive rate was 6.8% and the age adjusted rate for male (7.2%) was higher than that for female (4.9%). Anti-HBs positive rate was 35.3% (36.1% for male, 37.9% for female) and anti-HBc positive rate was 45.5% (46.5% for male,44.7% for female). Overall hepatitis B virus (HBV) infection rate was 49.1% and the infection rate for male (50.3%) was slightly higher than that for female (46.5%). HBsAg positive rate and infection rate were increased as the grade increased but it was attributed to the age distribution of the students. HBaAg positive rate for 20 years old students was 1.7%; 21 years, 6.6%; 22 years, 6.1%; 23 years, 12.2%; and 24 years and older, 6.4%. HBV infection rate showed an increasing trend as age increased; 45.8% for 20 years,41.5% for 21 years, 49.5% for 22 years, 55.5% for 23 years and 59.6% for 24 years and older. The age differences in HBsAg positive rates and HBV infection rates did not reach the statistical significance level of 0.05. However, these findings and similar age differences in HBsAg positive rates and HBV infection rates observed in other study suggest that there is a significant age differences. Study of the same age group in other schools and different social classes is warranted to confirm the age difference. Clarification of the reason for such differences would provide a clue to identify the major route of HBV transmission in this age group. Among 26 HBsAg positive students in the initial test, only one student was active hepatitis patient. Out of 24 students who had follow-up test after 16 months 22 students were positive for HBaAg and two students became HBsAg negative and anti-HBs positive. It is obvious that nearly one-half of the medical school students were infected with HBV before 20 years of age and the HBV infection occurs in medical school. Thus, it is recommended to test all the students for HBV infection soon after the admission to the medical school and immunize all the susceptible students with hepatitis B vaccine and give booster as they start to practice at a hospital.

• Korean Security Journal
• /
• no.11
• /
• pp.159-181
• /
• 2006

This study is concerned on Why The Certified Security certification is needed and How to control the security quality to get better service to the clients. Theses days are required The Certified Certificate in all the industry. And in this point of view, the certified certificate is a kind of confirmation by an authority to the person who has how much special knowledge and practice in a certain field. Moreover, in the functionalism society the certified certificate system would be very positive effect to the related industry and society as official measurement by an authority. The security is freedom from fear and anxiety. Which means the security can not be operated in isolation from citizen's safe-living expectation, and which is also dealing with valuable human being's life. For getting the better purpose the security industry employees should have more organized special training and education. As my understanding the certified certificate exam system is the confirmation by an authority, the certified certificate is only neutral evidence to get the confidence and credit from the clients. In this point of view the core point is How to control The Certified Certificate by a credied authority.