• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권3호
• /
• pp.735-748
• /
• 2014

The fault-tolerance routing problem is one of the most important issues in the application of the Internet of Things, and has been attracting growing research interests. In order to maintain the communication paths from source sensors to the macronodes, we present a hybrid routing scheme and model, in which alternate paths are created once the previous routing is broken. Then, we propose an improved efficient and intelligent fault-tolerance algorithm (IEIFTA) to provide the fast routing recovery and reconstruct the network topology for path failure in the Internet of Things. In the IEIFTA, mutation direction of the particle is determined by multi-swarm evolution equation, and its diversity is improved by the immune mechanism, which can improve the ability of global search and improve the converging rate of the algorithm. The simulation results indicate that the IEIFTA-based fault-tolerance algorithm outperforms the EARQ algorithm and the SPSOA algorithm due to its ability of fast routing recovery mechanism and prolonging the lifetime of the Internet of Things.

• 산업기술연구
• /
• 제13권
• /
• pp.89-96
• /
• 1993

In this paper, an OPS(Optical Protection Socket) unit is designed and prototyped for the application in the optical CPN(Customer Premises Network). The OPS unit, which plays an important role in the CPN for the enhanced network reliability, is consisted of $1{\times}2$ optical fiber splitter, combiner, and $1{\times}1$ optical switch to be a hybrid-typed unit. Various considerations, about power burget and optical information loss have given the most practical design for OPS. From the measurement of the realized OPS unit, it has proved such as the pertinent switching delay time with minimum data loss, the perceptive ability on the ONU degradation, the switching ability on the ONU malfunction.

• KIEAE Journal
• /
• 제2권2호
• /
• pp.33-38
• /
• 2002

There are a number of practical uses for devices which are capable of piping large amounts of light: illumination of areas where there would be maintenance, safety, or security problems with electronic light sources; piping sunlight into indoor areas for illumination; and the conversion of high luminous efficacy, good color quality, high intensity discharge lamps into more acceptable linear of area sources of light. Prism light guides are hollow structures which pipe light by means of total internal reflectin(TIR). These devices are unique in their ability to combine the efficiency of TIR with the relatively low cost of hollow structure. An important application stems from their ability to transform a point source of light such as an incandescent or discharge lamp into a linear or area source of light or illumination. We report the development of an economical, flexible prismatic film for fabricating the light guide wall. This guide geometries and films are currently under development.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제8권4호
• /
• pp.1178-1191
• /
• 2014

The fault-tolerance routing problem is one of the most important issues in the application of the Internet of Things, and has been attracting growing research interests. In order to maintain the communication paths from source sensors to the macronodes, we present a hybrid routing scheme and model, in which alternate paths are created once the previous routing is broken. Then, we propose an improved efficient and intelligent fault-tolerance algorithm (IEIFTA) to provide the fast routing recovery and reconstruct the network topology for path failure in the Internet of Things. In the IEIFTA, mutation direction of the particle is determined by multi-swarm evolution equation, and its diversity is improved by the immune mechanism, which can improve the ability of global search and improve the converging rate of the algorithm. The simulation results indicate that the IEIFTA-based fault-tolerance algorithm outperforms the EARQ algorithm and the SPSOA algorithm due to its ability of fast routing recovery mechanism and prolonging the lifetime of the Internet of Things.

• 한국도서관정보학회지
• /
• 제33권2호
• /
• pp.189-210
• /
• 2002

문헌정보학과 교육실습실에는 분류와 편목의 실습 수업을 할 수 있는 분류·편목 실습실과 첨단의 매체나 시청각 기재 또는 실습용 교구를 사용하여 수업을 할 수 있는 영상매체 실습실, 인터넷을 통한 다양한 정보 검색 방법을 체득하게 하고, 정보착용 능력을 길러 주며, 컴퓨터 관련 정보학 교과 수업을 할 수 있는 정보처리 실습실을 둔다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.508-513
• /
• 1996

The purpose of this paper, having chosen the connection method, filled by High-strength mortar, in conncetion of PC member, is to study the mechanical behaviour and practical usage of the method. The paper estimates the connection ability of Reinforced-bar, that is, Sleeve considering the effect of Reinforced-bar's dimeter. Sleeve's length and diameter in the structural behaviour of mortar-filled connection, therefore the behaviour of Splice-Sleeve exists in concrete practically. This paper discusses the effect of the concrete in Splice-Sleeve. Also, to estimate structural behaviour in a practical wall panel, the upper and bottom wall panels are produced and the behaviour of Splice-Sleeve is discussed. And then Vertical Tie Bar being designed by using Precast method, this paper presents the various application and the practicable method using Splice-Sleeve.

• 정보교육학회논문지
• /
• 제10권3호
• /
• pp.299-306
• /
• 2006

교육인적자원부는 ICT 활용 교육을 주도해 나가는데 가장 중심이 되는 교사의 ICT 활용 능력을 신장시키기 위해 다양한 방안들을 수립하여 추진하고 있다. 그러나 현재 시행되고 있는 교사의 ICT 활용능력 신장에 관한 대부분의 노력들은 ICT를 직무활동에 효과적으로 활용할 수 있는 능력보다는 기술소양 능력에 중점을 두고 있다. 그러므로 본 논문에서는 교사의 직무활동을 분석하고, 국내외 교사 ICT 활용능력 평가도구를 비교 분석하여 교사의 ICT활용능력 자기평가 도구를 개발하였다. 또한, 개발된 웹 기반 교사의 ICT 활용능력 자기평가도구를 광주와 전남 지역의 교사를 대상으로 적용하여 성별, 직위별, 지역별, 교육경력별 ICT 활용능력 수준 등을 조사분석하였다.

• 대한통합의학회지
• /
• 제2권3호
• /
• pp.15-22
• /
• 2014

Backround : The paradigm of recent education has been shifting from existing style of professor-oriented, passive and rote teaching to learner-centered education. Rather than mere delivery of knowledge, today's idea of education uses various audiovisual media to let learners gain more problem-solving skills, judgment, cognitive thinking ability, and creativity to apply to real practice. Also, while current trends and change in policy ask for related industry to require practice-centered teaching learning model, Problem-Based Learning (PBL) is quite effective that it activates problem-solving skills as well as application of National Competency Standards (NCS). Purpose : The purpose of this study was to suggest a teaching learning model article as an approach to apply web-based PBL for patient & medical charge management practices. Discussion & Conclusion : This paper the cases on PBL and presents the teaching learning model on web-based PBL as an approach to applying web-based PBL, which fits Medical Information System Department that combines health-medical treatment and computer applications, to practical health administrative affairs.

• Journal of Mechanical Science and Technology
• /
• 제17권1호
• /
• pp.139-145
• /
• 2003

Diode laser sensor is conducted to measure the gas temperature in the liquid-gas 2-phase counter flow flame. C$\_$10/H/ sub 22/ and city gas were used as liquid fuel and gas fuel, respectively. Two vibrational overtones of H$_2$O were selected and measurements were carried out in the spray flame region stabilized the above gaseous premixed flame. The path-averaged temperature measurement using diode laser absorption method succeeded in the liquid fuel combustion environment regardless of droplets of wide range diameter. The path-averaged temperature measured in the post flame of liquid-gas 2-phase counter flow flame showed qualitative reliable results. The successful demonstration of time series temperature measurement in the liquid-gas 2-phase counter flow flame gave us motivation of trying to establish the effective control system in practical combustion system. These results demonstrated the ability of real-time feedback from combustor inside using the non-intrusive measurement as well as the possibility of application to practical combustion system. Failure case due to influence of spray flame was also discussed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제4권2호
• /
• pp.71-82
• /
• 2012

In recent practices, a half circular prismatic bar protruding beyond the concave surface of the horn facing the gap has been formed along the centerplane of a rudder to lessen the gap flow between the horn and the movable portion of the rudder system. If a flow through the gap of a rudder is reduced considerably through this approach, previous numerical studies indicate that not only the gap flow but also the rudder cavitation can be noticeably diminished. In the present study, numerical simulations on two-dimensional rudder sections were performed to show that the blocking ability of the single centre bar can be improved by the proper choice of sectional shape. Moreover, a pair of blocking bars attached symmetric to the centerplane on the opposite convex surface of the movable portion is suggested in the study as well, to circumvent the difficulties arising from the practical application of the single centre bars. The bars are placed near the outer edges of the gap easily accessible at the maximum rudder angle to allow simple installation of the device during a maintenance period of a ship. It is found that the pair of blocking bars further improves the blocking effects and application to a practical three-dimensional rudder also backs up the fact.