• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.8
• /
• pp.64-71
• /
• 2017

A damage estimation method is presented for jacket-type support structure of offshore wind turbine using a change of modal properties due to damage and committee of neural networks for effective structural health monitoring. For more practical monitoring, it is necessary to monitor the critical and prospective damaged members with a limited number of measurement locations. That is, many data channels and sensors are needed to identify all the members appropriately because the jacket-type support structure has many members. This is inappropriate considering economical and practical health monitoring. Therefore, intensive damage estimation for the critical members using a limited number of the measurement locations is carried out in this study. An analytical model for a jacket-type support structure which can be applied for a 5 MW offshore wind turbine is established, and a training pattern is generated using the numerical simulations. Twenty damage cases are estimated using the proposed method. The identified damage locations and severities agree reasonably well with the exact values and the accuracy of the estimation can be improved by applying the committee of neural networks. A verification experiment is carried out, and the damage arising in 3 damage cases is reasonably identified.

• Journal of vocational education research
• /
• v.35 no.6
• /
• pp.113-141
• /
• 2016

The apprenticeship training is given as a solution of the youth unemployment problem. The apprenticeship is a system that companies hire and instruct trainees and is implemented in various countries. In Korea, there is a Korean work-learning dual system which is managed by the government rather than the company itself. This Study analyzed Germany, Switzerland and Austria's apprenticeship training system and compared common factors of apprenticeship system, a trainer in company and cost-benefit analysis. The result of the study can be shown as follows. First, Germany operates practical training, meanwhile Switzerland and Austria provide a pre-education course before students enter the upper-secondary VET course. Second, Germany and Switzerland give a single type apprenticeship training, whereas Austria runs a modularization system, which enables students to specify their skills and improves clarity. Third, social partners as well as the government, states, companies/schools actively participate in apprenticeship. Fourth, there is a suitable trainer's qualification system in all countries. Finally, Germany and Austria's companies cause larger cost than benefit in apprenticeship. On the other hand, Switzerland gets larger net-benefit than cost. We can give implications to the Korean work-learning dual system based on this study.

• The Journal of the Korea Contents Association
• /
• v.21 no.4
• /
• pp.292-302
• /
• 2021

The purpose of this study was to use Google Classroom for Cooking Practice Subject. We would like to present a practice class operation method suitable for the current educational environment and conditions. If the Untact Class in the Practice Subject is conducted in the future, we want to cultivate the core competencies and practical skills of the major. In addition, Q Methodology, which can be extracted by type, was applied by analyzing subjective opinions or perception structures for the cooking major students who are currently experiencing the curriculum. The survey period was conducted from March 23 to April 30, 2020 for first-year Cooking Major students taking the Cooking Practice Subject. Type 1 (N=11): Development of cooking training kit, Type 2 (N=7): Special lectures from industry experts, Type 3 (N=7): Development of practice form self-directed learning, respectively. Based on this study, it is expected to contribute to the Q Methodology on the development of the curriculum for the operation of the cooking practice subject, the effectiveness of education, and the application of learning methods.

• Journal of Practical Engineering Education
• /
• v.9 no.1
• /
• pp.69-75
• /
• 2017

In this paper, we analyzed the factors influencing the size of Korea Polytechnic as a public vocational education and training institution through analysis of demand, region, industry, and demand with established existing campus and new campus in Korea Polytechnic. By analyzing data on admission, training, and employment for 3 years out of 37 campuses, we have sampled 5 campuses by type of Korea Polytechnic, fused with the results derived from the literature analysis and in-depth analysis results, so that the regional campus will play a leading role and the direction of development. The selection of five campuses by type is a precedent study to analyze 37 campuses in the future. As a result of the study, the demand analysis through objective indicators such as the number of high school graduates, the number of employed persons, the presence of nearby industrial complexes, and policy variables is very important and reflects the reality well. Therefore, it is necessary to analyze the demand through the objective indicators in decision making related to the new campus at the pre-analysis stage. In addition to the general data proposed in this paper, that is, common variables in all regions, it is important to consider the factors that can reflect local demand characteristics when considering specific locations.

• 대한공업교육학회지
• /
• v.30 no.2
• /
• pp.60-71
• /
• 2005

A pendulum of industrial education begins to shift from one based on industrialized society to one on information-based age. To produce an effective result in this situation, It is necessary that an accurate estimate of a change in the circumstances of industrial high schools of Gyeonggi-do. This study researched the province's characteristics and countermeasures on industrial education adjusting the change of industrial environments by regional groups and suggested the solutions as follows. First, This study classified Gyeonggi-do into 9 regions considering the region's respective industrial structure and suggested the structure adjustment plan. Second, This study suggested '3-type curriculum management plan' based on the structure adjustment plan of industrial high schools. It includes employment-centered curriculum which provides the human resources required by industrial community, foundation-centered curriculum which revitalizes starting up a enterprises and clears up the manpower problems, college preparation-centered curriculum which meets the need of the students who are much interested in going to the next stage of education. Third, this study suggested a solution to a problem of surplus industry teacher. It includes 3 methods: Increasing practical training from 2 ours to 3 hours, assigning teachers for a task of academic-industrial collaboration and career counseling, qualifying industrial teachers for another course by minor. An amicable settlement on these matters requires a systematic administrative and financial support based on closely connected governmental-academic-industrial collaboration.

• The Journal of the Korea Contents Association
• /
• v.22 no.6
• /
• pp.680-691
• /
• 2022

Virtual farm is a kind of virtual reality for education and training, which realizes a change in attitude toward farming and aims for economic performance through revisiting the virtual farm. With the recent introduction of P2E-type virtual reality, a way to connect virtual farming experiences with practical benefits is being considered. However, few studies have been conducted on the factors that influence the success of virtual farms. Hence, the purpose of this study is to examine whether the quality of virtual farm contents and system quality affect user satisfaction with virtual farm experience based on the DeLone & McLean's IS Success Model. In addition, we will examine whether satisfaction with the virtual farm significantly contributes to the change in attitude toward farming. In addition, we demonstrate whether digital incentives contribute to the activation of P2E-type virtual farms.

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.844-850
• /
• 2023

Purpose: This paper is about the development of a short-circuit protection power supply device using incandescent bulbs and its application for educational materials. This article, which considers electrical safety and energy conservation at the same time, has many kinds of potential applications for both educational and industrial areas. The above mentioned short-circuit protection power supply device using incandescent bulbs enhances safety and efficiency compared to normal current power supply devices. Additionally, as an educational materials, it can be used for electric safety training, and provides practical electrical safety knowledge on our actual life. Method: Using incandescent bulbs, design new type of short-circuit protection power supply device, and through verifying the function and safety of the device, make new type device, and applying it for an educational tool. Conclusion: This study is to develop new type of power supply device, and verify the possibility of the application for the device as an educational materials. Through this research, show an innovative solution, which contribute to electrical safety and energy conservation, and open the potential possibility on educational and industrial sectors.This kind of research is expected to contributes to enhanced research, and education on electrical safety and energy conservation management.

• Korean Journal of Social Welfare Studies
• /
• v.41 no.2
• /
• pp.189-216
• /
• 2010

This study is to show the effect of single mothers' community participation on empowerment and the mediation effect of gender consciousness that mediate the causal relationship between this two variables defining the organization, which single mothers have been participated, as a community based on that there are common goals, emotional bond, and reciprocal action between the members. 439 single mothers, who have been participated in one of 14 organizations in Pusan and Gyeongnam, have been surveyed and the practice elements of emporwerment, gender consciousness, and empowerment have been analyzed from it. The results are first, There was significant differences at the practice elements of empowerment, gender consciousness, and empowerment according to the types of single mothers' community. Mostly it was high among job training type community and low among social welfare institution type community. Second, it has been shown that the determinant factors of empowerment are the degree of community participation and the practical elements of empowerment. Third, The changes in gender consciousness should be proceeded before that the practice of community empowerment, which the changes in gender consciousness represent the full mediation in the relationship between the practical elements and empowerment effect, leads the improvement of single mothers' empowerment.

• The Journal of Korean Institute for Practical Engineering Education
• /
• v.1 no.1
• /
• pp.13-18
• /
• 2009

In this paper, local industry target by analyzing the actual state of engineering education-oriented, demand for engineering education to come up with ways to improve. To this end, training human resources training program in engineering education practice Caps-tone design, Cooperative system, contract-type as the main theme of human resources in the southwestern industrial target academic staff investigate the actual conditions were run cooperative education programs. Survey, southwestern regional industry operating experience, most industry-university cooperative education program that was unsatisfactory. In addition, promoting Cooperative system experience in the industry will promote the future looked reservation position, while the Caps-tone design is somewhat academic partners participating a majority opinion education program run by the model will be developing. Regional strategy based on future demand for industry-oriented engineering education program for running is to come up with ways improvements.

• International Journal of Contents
• /
• v.14 no.3
• /
• pp.61-68
• /
• 2018

Unlike in the past, where the expression of the form was given a priority, with the widening of the scopes of the designs, the proportion of design education institution curricula targeting user experience and the application of technology is continually and gradually increasing. Open source microcontroller boards such as Arduino have initiated attracting attention as a countermeasure against these changes. These prototyping tools have many advantages for the diversification of expression and design verification in the design field and therefore have a high likelihood of being introduced into many design education institutes; however, the tools act as high entry barriers for design students who lack engineering knowledge. Although various educational content and tools have been developed to address the issue of barrier, existing solutions remain insufficient as alternatives for the purpose of activation. In this study, we investigated the present state of related education content and conducted a pilot workshop using a prototype microcontroller board with simplified coding. We intend to use the results of this investigation to develop study material for design education. We started by conducting a survey regarding the pre-university education situation. It was observed that engineering education opportunities are insufficient and the problem of mutual application between educations due to course-based education was not realized. We also analyzed the characteristics of simplified training tools using the microcontroller to establish a direction for educational design and conducted a pilot workshop using the microcontroller toolkit with a simplified coding process based on this content. Students who lack a basic knowledge of engineering technology received instruction, and after completing minimum preliminary training, they proceeded to practical exercises that involved utilizing the toolkit. Through this process, we identified the need for a simple-type microcontroller board with low-complexity for use in educating students majoring in design. We also identified some obstacles that serve as barriers to entry of utilizing microcontroller board. Based on these results, we propose several functional requirements and teaching guidelines for prototyping toolkits for design education.