• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.145-148
• /
• 2009

연료 과농 가스발생기의 연소시험이 파워팩 환경에서 수행되었다. 가스발생기는 파워팩 환경에서 특성 길이 증가로 인해 축 방향 연소 불안정에 취약하다. 가스발생기 후단에 압력 강하를 위해 삽입한 오리피스는 축 방향 연소 안정성을 향상시켜주는 것으로 확인되었다. 연소실과 추진제 매니폴드에서 측정한 압력 섭동의 세기는 연소실 압력의 제곱에 비례하여 증가하였다. 특히 연료 매니폴드 내의 압력 섭동이 산화제 매니폴드 또는 연소실 압력 섭동보다 약 2배 이상 크게 발생하였다. 주파수 분석 결과, 연료 매니폴드 압력 섭동은 비선형적인 특성을 내포하고 있는 것으로 파악되었다.

• 한국수소및신에너지학회논문집
• /
• 제21권4호
• /
• pp.321-327
• /
• 2010

Current rechargeable battery cannot provide high energy density and the operational durations required. But linear engine/generators provide high energy density for portable power applications because fuel is more high density. In this paper, we suggest that basic design of powerpack using linear engine for assisting power output. Efficiency is relatively high because linear engine don't have crank mechanism compared with rotary engine. We made prototype engine and had experiments to know moving characteristic about the Linear Engine. It was possible to operate velocity at 50 Hz at the firing and pressure in cylinder was 16bar.

• 한국수소및신에너지학회논문집
• /
• 제22권4호
• /
• pp.512-519
• /
• 2011

Current rechargeable battery cannot provide high energy density and the operational durations required. But linear engine/generators provide high energy density for portable power applications because fuel is more high density. In this paper, we suggest that basic design of powerpack using linear engine for assisting power output. Efficiency is relatively high because linear engine don't have crank mechanism compared with rotary engine. We made prototype engine and had experiments to know moving characteristic about the Linear Engine. It was possible to operate velocity at 50 Hz at the firing and pressure in cylinder was 16bar.

• 한국산업융합학회 논문집
• /
• 제25권5호
• /
• pp.889-898
• /
• 2022

In this study, sand casting process was applied to manufacture a large aluminum turbo-type fan used for tank powerpack. To apply the sand casting method, the turbo fan was reverse engineered, and after designing three gating systems, the optimal gating system design was selected by performing casting simulation. In the case of the bottom up-gating system, there is a significant temperature loss of the molten alloy during blade filling. When the molten alloy is completely filled into the sand mold, the blade upper tip and front shroud are below the liquidus temperature. In the case of the top down-gating system, molten alloy scattering occurs, but the temperature loss while the blade is filled is smaller than that of the bottom up type. And after the inflow of molten alloy into the mold is completed, the blade upper tip and front shroud are higher than the liquidus temperature. A sand mold was manufactured with the top down-gating system and the casting process was performed. The fan was made perfectly in appearance without any unfilled parts.

• 한국추진공학회지
• /
• 제19권5호
• /
• pp.62-70
• /
• 2015

액체로켓엔진은 시동단계에서 갑작스런 압력 및 온도 등의 부하변동이 발생할 수 있다. 따라서 성공적인 액체로켓엔진 개발과 함께 비용, 시간을 절감하기 위해 시동 해석이 필요하다. 본 연구에서는 다단연소사이클 액체로켓엔진 파워팩에 대한 시동 해석 시뮬레이터를 개발하여 압력 및 유량 밸런스를 통한 유량을 결정하고 터빈 및 펌프의 수학적 모델링을 통해 최종적으로 시간에 따른 터보펌프의 회전속도를 구하였다. 시동 해석 결과, 정상상태도달까지 약 1.3초가 소요되었으며 이때의 회전속도로는 27,500 rpm을 얻었다. 또한 안정적 시동을 위한 적절한 시퀀스 제시가 가능함을 확인했다.

• 한국수소및신에너지학회논문집
• /
• 제23권2호
• /
• pp.183-190
• /
• 2012

The research shows the experiment results according to the combustion characteristics and configuration of the linear generator of powerpack for the generating power applying the 2-stroke compact linear engine. The powerpack used in this paper consists of 2-stroke linear engine, linear generator and air compressor parts. For identifying the combustion characteristics and generating power of linear engine, some parameters were varied sucha as electric load, fuel input calorie, spark timing delay and equivalence ratio. Also generating power was confirmed at each operation conditions, when the air gap length of linear generator part was changed as each 1.0 mm and 2.0 mm. During the all operations, intake air was inputted under the wide open throttle. Mass flow rate of air and fuel was changed using mass flow controller, after these were premixed by premixture device, and then premixed gas was supplied directly into each cylinder. As a result, piston frequency and combustion characteristics were different at each conditions according to parameters affecting the combustion such as fuel input calorie, resistive load, spark timing delay and equivalence ratio. Consequently, these had an effect on generating power.

• 한국추진공학회지
• /
• 제20권3호
• /
• pp.1-8
• /
• 2016

본 연구에서는 다단연소사이클 액체로켓엔진 파워팩에 대해 시동과정에서의 동특성 변화를 예측하였다. 시동특성과 관련된 주요 인자 중 밸브 개방시점에 대해 분산값을 정의하고 몬테카를로 방법을 적용하여 이들이 시동특성에 미치는 영향을 살펴보았다. 해석 결과, 연소기 연료 밸브 개방시간 및 시동터빈 종료시간이 시동특성과 관련된 주요 변수임을 확인하였다. 연소기 연료 밸브 개방시점과 시동터빈 종료시점을 분리하여 해석한 결과, 연소기 연료 밸브 개방시점이 시동특성과 매우 밀접한 관련이 있음을 확인하였고 안정적 시동을 위해서는 시동터빈 작동이후 약 1초 이전에 밸브가 개방되어야함을 알 수 있었다. 이를 통해 안정적 시동을 위한 시동 시퀀스 설정이 가능함을 확인하였다.

• 설비공학논문집
• /
• 제24권1호
• /
• pp.85-89
• /
• 2012

This study has been conducted to compare two cargo handling systems on MR tanker and Panamax tanker. Submerged hydraulic cargo pumps with hydraulic power packs and frequency converter controlled electric deepwell pumps will be investigated and compared on all aspects of initial cost, installation, operation and maintenance. The result of investigation shows Electric Systems have less manufacturing costs, higher environmental friendliness and reliable operation compare to Hydraulic Systems. Furthermore, the present experimental data will provide important database for Electric Systems onboard new ships and practical and empirical guidelines are constructed for further determine the design of the Electric Systems.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.155-158
• /
• 2007

액체로켓엔진 개발 시험의 중간 단계로서 연소기를 제외한 터보펌프 등의 엔진 주요 구성품을 이용한 터보펌프+가스발생기 연계시험이 수행 중에 있다. 터보펌프+가스발생기 연계시험의 시험기 및 시험설비 구성을 기술하였다. 연계시험 수행을 위한 시험설비 시스템 검증 시험 결과를 제시하였다. 시험설비에 대한 예비시험 결과를 토대로 시험설비 추진제 공급시스템의 검증이 수행되었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.789-792
• /
• 2005

The dominant noise sources of Diesel Multiple Units are powerpack, which is composed of engine, transmission and cooling system, noise and wheel-rail rolling noise. The interior noise of a running vehicle is determined by structure-borne noise and air-borne noise from these noise sources. The contributions of interior noise from each noise source are calculated by air-borne transfer functions and structure-borne transfer functions of noise sources. In this paper, source separation technique is proposed to determine these transfer functions from the results of stationary and running tests of existing vehicle. With this technique, it is possible to get hold of contributions of interior noise from .noise sources of running vehicle. This source separation technique makes it possible to take efficient measures for reduction of interior noise at the early car-development stage.