• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1145-1154
• /
• 2018

In order to prevent interference and interference of the frequency, it is required to convert the regulatory standard into the center of the radiation power radiated to the actual public. Since the radiation power regulation is related to general radio management such as technical standards, permits, and inspections, it is gradually introduced in consideration of applicability and urgency, and the radiation power related laws of major countries And a method of controlling the output of the radio equipment such as measurement, inspection, and authentication. In Korea, the proportion of antenna power supply is high, and in Europe, radiation power is high. Since the number of radio stations will increase and diversify in the future, institutional improvement should be made so that it can be measured in parallel with the radiocommunication infrastructure of the space manager. In order to convert to the radiative power management system, the system for the related radio system needs(Technical standards, certification, inspection of radio stations, post-management, etc.) to be improved.

• Korean Journal of Exercise Nutrition
• /
• v.23 no.1
• /
• pp.36-47
• /
• 2019

[Purpose] We conducted a meta-analysis to evaluate the effects of Taekwondo training on the physical fitness factors in Korean elementary students comprehensively and quantitatively. [Methods] We classified research studies published until November 2018 according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines and selected a total of 17 research items; a meta-analysis of these items was then conducted. We used the Comprehensive Meta-Analysis 3.0 and Review Manager 5.3 to analyze the mean effect size, study quality, and publication bias. [Results] Taekwondo training improved the cardiopulmonary endurance, muscle endurance, and power of the elementary students, but was not practical or less useful on other physical fitness factors. The meta-regression analysis of the cardiopulmonary endurance and power items showed that the effect size was large when the sample size was small. Therefore, it is necessary to consider the sample size in interpreting the effect size for these two items. Further, during correction of the publication bias for the power items, the improvement effect by Taekwondo training was eliminated. [Conclusion] Taekwondo training is helpful for improving the cardiopulmonary endurance and muscle endurance of Korean elementary students but is not useful for other physical fitness factors.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1559-1570
• /
• 2013

The family of ISO/IEEE11073 standards is the basis of the e-health system and provides interoperability for personal health devices. In the early stage of e-health business, it was expected that people would use a health device individually. In this case, a measurement datum was episodically acquired and generally transmitted for one person at a time. Recently, a health device is expected to be used by multiple people, and large amounts of measurement data are gathered in a short time interval. In addition, mobile health devices have become more popular, so that energy efficient measurement data transmission is required, to prolong the use of a device. In IEEE11073 PHD standards, data transmission is classified into three different types: immediate individual transfer, small block transfer, and large block transfer. The large block transfer using PM-store concept provides efficient transmission. However, an existing PM-store has problem when a device is used by multiple people. To address the defined problem, a modified PM-segment that is in compliance with 11073 standards is proposed in this paper. In particular, the proposed PM-segment is designed to minimize the additional complexity of an agent instead of a manager and it is interoperable with the existing manager. The proposed PM-segment shows better performance than the existing PM-segment, in terms of memory requirements and expected queue time. Also, performance comparison among the three transfers is performed in regard to the delay time and communication power consumption points of view.

• Journal of Communications and Networks
• /
• v.8 no.4
• /
• pp.451-460
• /
• 2006

Since low earth orbit (LEO) satellite constellations have important advantages over geosynchronous earth orbit (GEO) systems such as low propagation delay, low power requirements, and more efficient spectrum allocation due to frequency reuse between satellites and spotbeams, they are considered to be used to complement the existing terrestrial fixed and wireless networks in the evolving global mobile network. However, one of the major problems with LEO satellites is their higher speed relative to the terrestrial mobile terminals, which move at lower speeds but at more random directions. Therefore, handover management in LEO satellite networks becomes a very challenging task for supporting global mobile communication. Efficient and accurate methods are needed for LEO satellite handovers between the moving footprints. In this paper, we propose a new seamless handover management scheme for LEO satellites (SeaHO-LEO), which utilizes the handover management schemes aiming at decreasing latency, data loss, and handover blocking probability. We also present another interesting handover management model called satellite mobility pattern based handover management in LEO satellites (PatHO-LEO) which takes mobility pattern of both satellites and mobile terminals into account to minimize the handover messaging traffic. This is achieved by the newly introduced billboard manager which is used for location updates of mobile users and satellites. The billboard manager makes the proposed handover model much more flexible and easier than the current solutions, since it is a central server and supports the management of the whole system. To show the performance of the proposed algorithms, we run an extensive set of simulations both for the proposed algorithms and well known handover management methods as a baseline model. The simulation results show that the proposed algorithms are very promising for seamless handover in LEO satellites.

• Journal of the Korean Society of Safety
• /
• v.32 no.2
• /
• pp.27-33
• /
• 2017

This study is intended to identify issues on the basis of investigating the actual state of laboratory environment and outlet circuit, and derive end states by expressing sequences from the initiating event of disaster to accident in leakage current, poor contact and overload through ETA(event tree analysis). To this end, this study investigated the actual state of electric equipment of laboratory at universities in all parts of country. And it is shown that most of them are failure in electric work and user negligence in the investigation of actual state. It is found that there is earth fault and defect in wire diameter in the failure of electric work and the problem of partial disconnection due to wire bundling and poor contact in user negligence. Outlet-related component, failure rate and initiating events are composed of a total of 41 initiating events, i.e., 30 internal initiating events and 11 external initiating events. And end states are composed of a total of 15 parts, i.e., 3 electric power parts and 12 safety parts. Earthing class 3 is the most important safety device against leakage current (initiating event). And in case of poor contact, it is necessary for manager to check thoroughly because there is no safety device. In case of overload/overcurrent, when high-capacity equipment is connected, a molded case circuit breaker, safety device, worked. However, in most cases, it is verified that this doesn't work. This study can be utilized as electric equipment safety guide for laboratory safety manager and managers.

• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.421-427
• /
• 2013

Disk Cache Manager(DCM), a functional server of microkernel based, to improve the I/O power of shared disks is designed and implemented in this work. DCM interfaces other different servers with message passing through ports by serving as a system actor the multi-thread mode on the Minix3 micro-kernel. DCM proposed in this paper uses the shared disk logically as a Seven Disk and Sodd Disk to enable parallel I/O. DCM enables the efficient placement of disk data because it raises disk cache hit-ratio by increasing the cache size when the utilization of the particular disk is high. Through experimental results, we show that DCM is quite efficient for a shared disk with higher utilization.

• Industry Promotion Research
• /
• v.2 no.2
• /
• pp.45-52
• /
• 2017

this study, the problem of the quality is analyzed by questionnaire analysis of the current quality managers, and the German meister system, the Japanese name deduction system, the functional manager, and the quality manager system. First, we set up a quality guide selection classification guide model. Secondly, we set up a model for combining experience and expertise with theory. Third, we set up a quality brand application model to enhance competitiveness of SMEs. Fourth, The basic model is presented. The expected effects of these models are that, in the knowledge-based economy, in terms of identifying, fostering, and utilizing superior talents, quality experts combine academic theories and experience in each field to provide core expertise and knowledge, As a transformative leader and expert, we will become a leader of innovation activities by enhancing corporate competitiveness, developing younger leaders, and cooperating with suppliers. In order to strengthen competitiveness of SMEs, It will be possible to scale and cultivate the technology of SMEs.

• Resources Recycling
• /
• v.31 no.5
• /
• pp.52-58
• /
• 2022

Silicon carbide powder was prepared from carbon black and silicon recovered from waste solar panels. In the solar power generation market, the number of crystalline silicon modules exceeds 90%. As the expiration date of a photovoltaic module arrives, the development of technology for recovering and utilizing silicon is very important from an environmental and economic point of view. In this study, silicon was recovered as silicon carbide from waste solar panels: 99.99% silicon powder was recovered through purification from a 95.74% purity waste silicon wafer. To examine the synthesis characteristics of SiC powder, purified 99.99% silicon powder and carbon powder were mixed and heat-treated (1,300, 1,400 and 1,500 ℃) in an Ar atmosphere. The characteristics of silicon and silicon carbide powders were analyzed using particle size distribution analyzer, XRD, SEM, ICP, FT-IR, and Raman analysis.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.4
• /
• pp.237-242
• /
• 2021

The purpose of this study was to investigate the effect of patient safety competencies and ethical climate in long-term care hospital nurses and to provide the basic data. Data were collected from 120 in D city and analyzed by t-test, ANOVA, Pearson correlation coefficient, and multiple regression using SPSS/WIN 25.0. The degree of Patient Safety Competencies in long-term care hospital nurses was 3.45± .41. There were not significant differences in Patient Safety. There was positive correlation between patient safety competencies and peer(r=.123, p<.001), manager(r=.241, p<.001), and hospital(r=.241, p<.001). The factors affecting the patient safety competencies confidence of the study subjects were peer(β=.23, p=.003), manager(β=.55, p=.004), hospital(β=.43, p=.031), with an explanatory power of 33.5%. Through this research requires the fellow study to determine the factors affecting patient safety competencies confidence of long-term care hospital nurses.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.6
• /
• pp.99-106
• /
• 2010

This paper proposes a novel design of enhanced auto light control system using PLC(Power Line Communication) and SMS(Short Message Service) to copy with emergent cases effectively. In the proposed system, the indoor sensing system is designed to send emergent messages to the users or system manager in case of fire or invasion, which may prevent secondary accident. In addition, data transmission using PLC may drastically decreases the number of lines. The experimental results show the effectiveness of the proposed system.