• Journal of Astronomy and Space Sciences
• /
• 제28권2호
• /
• pp.133-141
• /
• 2011

A satellite power system should generate and supply sufficient electric power to perform the satellite mission successfully during the satellite mission period, and it should be developed to be strong to the failure caused by the severe space environment. A satellite power system must have a high reliability with respect to failure. Since it cannot be repaired after launching, different from a ground system, the failures that may happen in space as well as the effect of the failures on the system should be considered in advance. However, it is difficult to use all the hardware to test the performance of the satellite power system to be developed in order to consider the failure mechanism of the electrical power system. Therefore, it is necessary to develop an accurate model for the main components of a power system and, based on that, to develop an accurate model for the entire power system. Through the power system modeling, the overall effect of failure on the main components of the power system can be considered and the protective design can be devised against the failure. In this study, to analyze the failure mode of the power system and the effects of the failure on the power system, we carried out modeling of the main power system components including the solar array regulator, and constituted the entire power system based on the modeling. Additionally, we investigated the effects of representative failures in the solar array regulator on the power system using the power system model.

• 조명전기설비학회논문지
• /
• 제26권12호
• /
• pp.56-61
• /
• 2012

There have been a lot of reports about the effects of geomagnetically induced current(GIC) on the power grids. However there has been little domestic efforts made in this relatively urgent area which include academic research or risk assessments on GIC. There still exist a claim that domestic power grids might be in the safe state from GIC since our geomagnetic latitude is low and our power grid is relatively small scale. However it has been already demonstrated that GIC has an effect on power grids located at all latitudes. In this study, we have reviewed the transpiratory principle of the GIC, case studies of the major damage in various regions and we have calculated the GIC that can occur in domestic power grids. This paper presents some of the fundamental information about the risk assessment of domestic power grids from GIC although more thorough investigation should be made to ensure the safe operation of nationwide electric power infrastructure.

• 한국항공우주학회지
• /
• 제35권2호
• /
• pp.130-135
• /
• 2007

스마트무인기 파워효과 풍동시험은 2005~2006에 3달여간 항공우주연구원 중형아음속풍동에서 수행되었다. 풍동시험 모델은 정적시험 모델을 활용하였고, 틸트로터 형태의 추진장치를 시험부에 고정하여 파워효과를 모사하였다. 파워효과는 기본적으로 로터가 장착된 시험과 로터가 장착되지 않은 시험의 차로 구해지나, 이 때 두 시험간의 흐름각 차이 및 지지부 간섭량 변화 등을 적절히 보정하여야 한다.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권7호
• /
• pp.429-436
• /
• 2003

This paper presents a new approach for evaluating the transmission marginal loss factors (MLFs) considering the reactive power. Generally, MLFs are represented as the sensitivity of transmission losses, which is computed from the change of the generation at reference bus by the change of the load at the arbitrary bus-i. The conventional evaluation method for MLFs uses the only H matrix, which is a part of jacobian matrix. Therefore, the MLFs computed by the existing method, don't consider the effect of the reactive power, although the transmission losses are a function of the reactive power as well as the active power. To compensate the limits of the existing method for evaluating MLFs, the power factor at the bus-i is introduced for reflecting the effect of the reactive power in the evaluation method of the MLFs. Also, MLFs calculated by the developed method are applied to energy spot markets to reflect the impacts of reactive power. This method is tested with the sample system with 5-bus, and analyzed how much MLFs have an effect on the bidding/offer price, market clearing price(MCP), and settlement in the competitive energy spot market. This paper compared the results of MLFs calculated by the existing and proposed method for the IEEE 14-bus system, and the KEPCO system.

• 융합경영연구
• /
• 제11권1호
• /
• pp.45-52
• /
• 2023

Purpose: The purpose of this study is to investigate the relationship between service quality, destination image, and tourist satisfaction for foreign tourists visiting Korea, and in particular, to analyze the moderating effect of psychological power in the relationship. Research design, data, and methodology: A research model was derived through existing literature research and a survey was conducted on foreign tourists visiting Korea. Structural equation model of SPSS and AMOS24.0 were used for data analysis and hypothesis testing. Results: The tourism service quality affects the image of tourist attractions. Images of tourist attractions were found to affect tourism satisfaction. It was found that the lower the psychological power, the greater the effect on the relationship between service quality and image, and the relationship between image and satisfaction. Conclusions: This study demonstrated that service quality at travel destinations is a key factor in order to enhance the image and satisfaction of Korean tourist destinations for foreigners visiting Korea. On the other hand, since the image and satisfaction level of the tourism destination vary depending on personal factors such as psychological power, it suggests that travel industry workers or researchers should develop and operate services tailored to the individual characteristics of the tourists.

• 조명전기설비학회논문지
• /
• 제26권7호
• /
• pp.70-76
• /
• 2012

In general, the unidirectional power flow is normal in distribution feeders before activation of distributed power source such as PV. However, the interactive power flow is likely to occur in case of the power system under distributed generation. This interactive power flow can cause an unexpected effect on convectional protection coordination systems designed based only on the unidirectional power flow system. When the power line system encounters a problem, the interactive power flow can be a contributed current source and this makes the fault current bigger or smaller compared to the unidirectional case. The effect of interactive power flow is varied depending on the location of the point to ground fault, relative location of the PV, and connection method. Therefore it is important to analyse characteristics of fault current and interactive flow for various transformer connection and location of the PV. This paper proposes a method of improved protection coordination which can be adopted in the protective device for customers in distribution feeders interconnected with the PV. The proposed method is simulated and analysed using PSCAD/EMTDC under various conditions.

• Current Optics and Photonics
• /
• 제3권5호
• /
• pp.458-465
• /
• 2019

The thermal effect and the light output of a laser crystal under different pumping depths were reported., Based on the thermal model of a single-ended pumped Tm:YAP crystal, the thermal stress coupled model used Comsol to theoretically calculate the effect of changing the pump spot size and pump depth on crystal heat distribution and stress distribution. The experimental results showed that the laser output power first increased and then decreased with increasing pump spot size. As the depth of focus increased, the laser output power first increased and then decreased. The experimental results were consistent with the theoretical simulation results. The theory of pump spot radius and depth of focus in this paper provided an effective simulation method for mitigating thermal effects, and provided theoretical supports for laser crystals to obtain higher laser output power.

• 복식문화연구
• /
• 제23권1호
• /
• pp.117-125
• /
• 2015

The purpose of this study is to evaluate the differences of body compensation image on variations in the shoulder height and width of power shoulder raglan sleeve jacket. Nine samples were examined: 3 variations of the shoulder height and 3 variations of the shoulder width. The data was evaluated by 123 fashion design majors. The results were as follows; as a result of analyzing the body compensation image according to changes in the shoulder height and width of power shoulder raglan sleeve jacket, five factors were selected; the shoulder compensation factor, the bust compensation factor, the waist compensation factor, the arm compensation factor and the neck compensation factor. Among these factors, the shoulder compensation factor is the most important factor. Examining the major effect of the body compensation image based on changes in the shoulder height and width of power shoulder raglan sleeve jacket, it had an independent influence on factors about waist, neck, shoulder and arm compensation except a factor about bust compensation, had an influence on interacting effect of factors about shoulder, bust, waist, arm compensation, and it had no influence on interacting effect of a factor about neck compensation. This shows that the shoulder height has larger effect on neck compensation image than the shoulder width in power shoulder raglan sleeve jacket.

• 유통과학연구
• /
• 제14권9호
• /
• pp.111-120
• /
• 2016

Purpose - This study aimed to investigate the effects of customer relationship quality and perceived power on complaint behaviors in a context of service failures in a restaurant. Two different types of complaint behaviors were employed: personal complaining that disappointed customers directly approach to a service manager and public complaining that customers ask for related institutions, like consumer protection organization, for help. This study also examined the moderation effects of brand reputation on the relationships between customer perceived power and two types of complaint behaviors. Research design, data, and methodology - The author developed a structural model in which customer relationship quality is proposed to affect customer perceived power, thus influencing personal and public complaint behaviors. The model also includes the moderating role of brand reputation; the effect of customer perceived power on two types of complaint behaviors becomes stronger when brand reputation is high. To analyze the research model, a survey based on a scenario regarding the contexts of service failures in a restaurant was conducted toward 126 female college students. SPSS 22.0 and AMOS 21.0 were utilized to test the hypotheses. Results - The findings are as follows. First, customers who had positive relationships with a restaurant are more likely to perceive that they have strong power to influence the service provider. Second, customer perceived power had a significant and positive effect on both personal and public complaint behaviors. Finally, when the brand reputation for a restaurant is high, dissatisfied customers who think they can exercise influence to the restaurant complain more actively toward the service provider. Conclusions - The findings of this study are against the traditional viewpoint on customer loyalty that loyal customers compared respond more generously to the mistakes of a company, but consistent with the 'love becomes hate' effect proposed by Grégoire, Tripp, and Legoux(2009). In complaining contexts, companies should manage customers with positive and strong relationship more carefully and strategically to prevent the expansion of economic and social risks from customers' complaining behaviors. This is more significant for companies with strong brand reputations.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.256-257
• /
• 2011

The development for Eco-friendly cars has been expanded as the concern about environmental pollution and a rise in gas prices. The Electric Vehicle(EV) and Plug in Hybrid Electric Vehicle(PHEV) are generally connected on distribution power systems to charge the traction batteries. The growing number of EV/PHEVs could have a effect on distribution power systems and result in overload of power utilities and power quality problems. In order to reduce the adverse effect on distribution power systems, the influence of electric vehicle loads should be evaluated. In this paper, the influence of electric vehicle loads is evaluated by using OpenDSS(Open Source Distribution System Simulator) according to the penetration rate of electric vehicle.