• Laser Solutions
• /
• v.18 no.3
• /
• pp.1-5
• /
• 2015

A 3D printer based on laser powder deposition (LPD), also known as DED (direct energy deposition), has been developed for fabricating metal parts. The printer uses a ytterbium fiber laser (1070nm, 1kW) and is equipped with an Ar purge chamber, a three-dimensional translation stage and a powder feeding system composed of a powder chamber and delivery nozzles. To demonstrate the performance of the printer, a tapered cylinder of 320mm in height has been fabricated successfully using Ti-6Al-4V powders. The process parameters including the laser output power, the scan speed, and the powder feeding rate have been optimized. A 3D printed test specimen shows mechanical properties (yield strength, ultimate tensile strength, and elongation) exceeding the criteria to employed in a variety of Ti alloy applications.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.6
• /
• pp.636-636
• /
• 1997

This paper presents the design and fabrication of a shaped-beam array antenna which will be used for a PCS basestation using structure that is coupled to a microstrip line by an aperture on the intervening ground plane. The shaped-beam pattern is obtained by an antenna synthesis method. An array antenna considering the mutual coupling between array elements(patches) and a feeding network are designed by CAD tools. The feeding network is designed by using the Wilkinson power divider to obtain the optimized shaped-beam. The designed results are compared with the measured data.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.3
• /
• pp.526-531
• /
• 2016

This paper presents an experimental study on the optimal settings for the selected DC fault relay (50F) to improve the operating performance for the high-speed circuit breaker on DC feeding system which ensure safety within rolling stock maintenance depot. In this study, current supplied to overhead contact wire was calculated on 1 ms interval to analyze the correction values of DC fault selective relay for the operation of current supply cutout. Particularly, standards for the accurate detection of accidents between an electric railway vehicle and the electric power facilities are shown by investigating the optimal correction values for detection of fault current, and the results indicated that it takes about 213 ms for the DC fault selective relay(50F) to fully open. In the future, the correction values of DC fault selective relay suggested in this paper will be used as the reference values of protective relay for the safe operation of DC electric railroad system such as urban railway.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.44 no.2
• /
• pp.37-43
• /
• 2022

Silkworm food has been found to be effective for dementia, liver function, lowering blood sugar, and possesses antioxidant properties, which has been attracting attention as a health functional food. In this study, methods for enhancing the functionality of silkworms were explored and the production potential of high-functional silkworms was analyzed. For enhancing antioxidant activity, ascorbic acid, caffeic acid, laminarin, and glutathione were injected or fed to 5th instar silkworms, and the antioxidant activity of silkworm extract was comparatively analyzed. There was no significant change in polyphenol and flavonoid content, but it was confirmed that 2,2-diphenyl-1-picrylhydrazyl radical scavenging ability, superoxide dismutase-like activity, and reducing power were slightly increased after injection of ascorbic acid, caffeic acid, and glutathione. To confirm the increase in antioxidant efficacy through feeding, an inducer was mixed with sucrose and sprayed on mulberry leaves. As a result, the growth rate of silkworms improved and all indicators of antioxidant activity were improved in silkworms fed with ascorbic acid and glutathione. Considering these results, producing high-functional silkworms was deemed possible.

• Journal of IKEEE
• /
• v.28 no.1
• /
• pp.20-25
• /
• 2024

This paper presents a new dualband shared-aperture microstrip antenna to operate in the S-Band of 2 GHz and X-Band of 8 GHz, for a Low Earth Orbit satellite antenna system. The proposed antenna incorporates two types of patches those are a rectangular loop-shaped for the S-Band and a square patch for the X-Band. Each patch are optimized for its respective operating band with minimal interference. The proposed antenna achieves a bandwidth of 16 MHz in the S-Band and 572 MHz in the X-Band. The highest gain is measured 7.14 dBi at 1.99 GHz and 7.95 dBi at 7.88 GHz. The proposed antenna exhibits half power beamwidths of 85 degree and 80 degree at 1.99 GHz and 7.88 GHz, respectively. The proposed dualband shared-aperture microstrip antenna may be a good candidate for as a feeding system of a dualband reflectarray antenna With its unidirectional radiation pattern from excellent agreement between simulation and measurement results.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.4
• /
• pp.67-72
• /
• 2022

This study presents the design of power amplifier (PA) in 60 nm GaN/Si HEMT technology. A customized transistor model enables the designing circuits operating at W-band. The all matching network of the PA was composed of equivalent transformer circuit to reduce matching loss. And then, equivalent transformer is several advantages without any additional inductive devices so that a wideband power characteristic can be achieved. The designed die area is 3900 ㎛ × 2300 ㎛. The designed results at center frequency achieved the small signal gain of 15.9 dB, the saturated output power (Psat) of 29.9 dBm, and the power added efficiency (PAE) of 24.2% at the supply voltage of 12 V.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.2 s.117
• /
• pp.158-165
• /
• 2007

In this paper, the circularly polarized $4{\times}4$ array antenna is proposed for the X-band. A single antenna consists of square patch and unequal cross-aperture coupled feeding. The RHCP(Right Handed Circularly Polarization) is generated by unequal cross-aperture coupled feeding. By reducing space among elements of way antenna from 0.8 ${\lambda}_0$ to 0.45 ${\lambda}_0$, the mounting area of array antenna is miniaturized. The $2{\times}2$ array antenna is designed using sequential rotation feeding network. The good level of gain, axial ratio, and impedance bandwidth are achieved. The $4{\times}4$ array antenna is extended by ${\lambda}/4$ transformer and T-junction power divider. The simulated maximum radiation gain is 15.09 dBi at 10 GHz. The simulated 3 dB Axial Ratio bandwidth is from 9.05 to 10.4 GHz(13.5%). Also the measured impedance bandwidth($VSWR{\leq}2$) of manufactured $4{\times}4$ array antenna is from 8.45 to 11.84 GHz(33.9%). The measured maximum radiation gain is 11.10 dBi at 10 GHz. The measured 3 dB Axial Ratio bandwidth is from 9.42 to 10.47 GHz(10.5%).

• Journal of Preventive Medicine and Public Health
• /
• v.9 no.1
• /
• pp.95-108
• /
• 1976

It is obvious that adequate nutrition is essential for growth and development of school children, and many elementary schools in this country have already practiced it. Therefore, it would seem apparent that the school feeding program would have a significant effect on the growth and development of school children. This paper presents a two-year experimental school-feeding program from 1973 to 1974, and attempts to evaluate its effects by before-and-after nutrition surveys conducted in two elementary schools, one experimental and the other as a control. The two schools are both located in the same county (Yongin-Kun, Kyunggi-Do), and the families of their students are presumed to share the same socio-economic level. To assess the effect of school-feeding, we measured height, weight, chest circumference and grasping power. Physical examination was done foresigns of nutritional deficiency. A stool examination for parasites and blood examinations for hemoglobin, hematocrit and serum protein were included. Analyses were done for 150 students selected randomly at the beginning of the program. These students attended the school throughout the program period. Results are as follows: 1. The amount of increase of height, weight, chest cirumference and grasping power were greater in the experimental school than in the control school, but the differences are not statistically significant. 2. Signs of vitamin deficiency decreased in both experimental and control schools during the two-year program period. 3. At the time of the 1974 post-survey, values of Hb. & Hct. revealed no significant differences between the two schools, but serum protein level was a little higher than that of general Korean rural children of the same age. 4. Infestation rate of parasites had increased in both schools during the two-year program period. 5. Each student of the two schools was classified into three major classes, according to the level of economic condition of his or her parents, namely higher, middle and lower. The results of each class of the experimental school was compared with that of the corresponding class of the control school, expecting the relative magnitude of change largest in the lower economic class of the experimental school. However, change was greatest in the middle class, still not being statistically significant. Finally, the authors concluded that the two-year period for such a program is not sufficiently long for its beneficial effects to be demonstrated and measured. As long as the growth and development of children are concerned, planning with a more distant perspective is required, as well as the development of new methods of evaluation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.8
• /
• pp.721-728
• /
• 2009

Equal/unequal 4-way power divider suitable for satellite communication using SIW technology is presented in this paper. The control of positions of guiding posts provides equal or unequal power division ratios by maintaining the width of the SIW unchanged. In addition, the detailed descriptions for the proposed power divider include the general characteristics of radial waveguide, feeding part using coaxial cable, simple SIW structure, power-guiding posts, and transition for measurement. The comparison between the simulated and measured data shows a good agreement at a center frequency of 10 GHz. The measured input impedance bandwidths for equal and unequal power divisions are about 2.1 GHz and 3 GHz under the condition of less than VSWR 2:1, respectively.

• International journal of advanced smart convergence
• /
• v.4 no.1
• /
• pp.104-113
• /
• 2015

This paper focuses on a temperature effects on a PV panel which has been installed in Thailand. The main objective is cleaning PV panels and reduce temperature of PV panel by water injects from waterway and experimental results of PV power what it is difference. This project is designed by PLC control system which water injects and control PV temperature, In addition, this project consists of hardware and software such as water pump, water injection and PLC control has been automatically and it can be control system manually. The automatic control system is working when PV temperature rises up over 45 degree Celsius after that the pumping machine would inject water to the surface of PV panels and it must be stop when the PV panel temperature comes down less than 45 degree Celsius. The result of actual experimental found that the control system has been done correctly under specify condition. The experimental has been shown electrical data before and after water injects on PV system found that the electrical power a bit increases and The energy has been taken from PV panel less than energy consumption equipment of control system which taken to operate the water injecting system.