• 제목/요약/키워드: Power-Efficient Routing Protocol

검색결과 94건 처리시간 0.027초

A Robust Energy Saving Data Dissemination Protocol for IoT-WSNs

  • Kim, Moonseong;Park, Sooyeon;Lee, Woochan
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제12권12호
    • /
    • pp.5744-5764
    • /
    • 2018
  • In Wireless Sensor Networks (WSNs) for Internet of Things (IoT) environment, fault tolerance is a most fundamental issue due to strict energy constraint of sensor node. In this paper, a robust energy saving data dissemination protocol for IoT-WSNs is proposed. Minimized energy consumption and dissemination delay time based on signal strength play an important role in our scheme. The representative dissemination protocol SPIN (Sensor Protocols for Information via Negotiation) overcomes overlapped data problem of the classical Flooding scheme. However, SPIN never considers distance between nodes, thus the issue of dissemination energy consumption is becoming more important problem. In order to minimize the energy consumption, the shortest path between sensors should be considered to disseminate the data through the entire IoT-WSNs. SPMS (Shortest Path Mined SPIN) scheme creates routing tables using Bellman Ford method and forwards data through a multi-hop manner to optimize power consumption and delay time. Due to these properties, it is very hard to avoid heavy traffic when routing information is updated. Additionally, a node failure of SPMS would be caused by frequently using some sensors on the shortest path, thus network lifetime might be shortened quickly. In contrast, our scheme is resilient to these failures because it employs energy aware concept. The dissemination delay time of the proposed protocol without a routing table is similar to that of shortest path-based SPMS. In addition, our protocol does not require routing table, which needs a lot of control packets, thus it prevents excessive control message generation. Finally, the proposed scheme outperforms previous schemes in terms of data transmission success ratio, therefore our protocol could be appropriate for IoT-WSNs environment.

저전력 손실 네트워크에서의 적응형 다중경로 라우팅 알고리즘 (Adaptive Multipath Routing Algorithm for Low-power Lossy Networks)

  • 김승현;정진우
    • 한국인터넷방송통신학회논문지
    • /
    • 제19권2호
    • /
    • pp.91-96
    • /
    • 2019
  • 일반적인 무선 센서 네트워크는 연결이 안정적이지 않고 외부 간섭에 민감하며 토폴로지가 유동적이므로 상황에 맞는 효율적인 전송 경로 설정이 중요하다. IETF (Internet Engineering Task Force)의 RPL(IPv6 Routing Protocol for Low-power Lossy Networks) 표준 라우팅 프로토콜은 다양한 환경 변화에 유연하게 대응하기 어려우며 네트워크 토폴로지의 불균형으로 인한 패킷 손실 문제가 상존한다. 다중경로로 여러 부모 노드를 통해 패킷을 전송할 경우 이러한 문제를 부분적으로 해결할 수 있지만 경우에 따라 필요 이상의 timeslot 할당으로 지연시간 증가를 초래할 수 있다. 본 논문에서는 상황에 따라 적절하게 다중경로를 사용하는 적응형 다중경로 RPL 알고리즘을 제안하고, 시뮬레이션을 통해 이의 효율성이 기존 RPL이나 다중경로 RPL에 비해 높음을 보였다.

이동 애드혹 네트워크에서 MAC 계층 자원을 이용한 에너지 효율 라우팅 프로토콜 (An Energy Efficient Routing Protocol using MAC-layer resources in Mobile Ad Hoc Networks)

  • 유대훈;최웅철
    • 한국컴퓨터정보학회논문지
    • /
    • 제12권6호
    • /
    • pp.219-228
    • /
    • 2007
  • 모바일 애드혹 네트워크에서는 노드가 이동성을 가지고 한정된 용량의 전지를 사용하기 때문에, 다중 홉으로 통신하는데 있어서 종단 간 경로를 설정하는 것이 매우 중요하다. 그 중에서도 AODV(Ad-hoc On-demand Distance Vector) 라우팅 프로토콜은 많이 사용되고 있는 프로토콜 중 하나이다. 하지만 경로를 탐색하는 과정에서 최단 홉의 수만을 고려하기 때문에, 노드의 이동성이나 전지의 소진 등으로 인해 중간 노드의 경로가 단절이 되는 문제점이 발생하게 된다. 경로의 단절이 발생하게 되면, 중간 노드들은 데이터 패킷을 폐기시키고 송신노드는 경로를 재설정해야 하기 때문에 대역폭의 낭비와 에너지 소비량이 증가되는 문제가 발생한다. 또한 이것은 네트워크의 생존시간을 단축하는 원인이 된다. 본 논문에서는 이러한 문제들을 해결하기 위하여 기존의 AODV 라우팅 프로토콜을 기반으로 전지의 남은 에너지양을 비롯하여 신호 세기, SNR(Signal to Noise Ratio) 등의 MAC 레이어의 자원들을 이용하여 경로를 설정하는 라우팅 프로토콜을 제안한다.

  • PDF

On the Need for Efficient Load Balancing in Large-scale RPL Networks with Multi-Sink Topologies

  • Abdullah, Maram;Alsukayti, Ibrahim;Alreshoodi, Mohammed
    • International Journal of Computer Science & Network Security
    • /
    • 제21권3호
    • /
    • pp.212-218
    • /
    • 2021
  • Low-power and Lossy Networks (LLNs) have become the common network infrastructure for a wide scope of Internet of Things (IoT) applications. For efficient routing in LLNs, IETF provides a standard solution, namely the IPv6 Routing Protocol for LLNs (RPL). It enables effective interconnectivity with IP networks and flexibly can meet the different application requirements of IoT deployments. However, it still suffers from different open issues, particularly in large-scale setups. These include the node unreachability problem which leads to increasing routing losses at RPL sink nodes. It is a result of the event of memory overflow at LLNs devices due to their limited hardware capabilities. Although this can be alleviated by the establishment of multi-sink topologies, RPL still lacks the support for effective load balancing among multiple sinks. In this paper, we address the need for an efficient multi-sink load balancing solution to enhance the performance of PRL in large-scale scenarios and alleviate the node unreachability problem. We propose a new RPL objective function, Multi-Sink Load Balancing Objective Function (MSLBOF), and introduce the Memory Utilization metrics. MSLBOF enables each RPL node to perform optimal sink selection in a way that insure better memory utilization and effective load balancing. Evaluation results demonstrate the efficiency of MSLBOF in decreasing packet loss and enhancing network stability, compared to MRHOF in standard RPL.

모바일 센서 네트워크에서 거리 기반 경로배정 메커니즘 (Distance-based Routing Mechanism in Mobile Sensor Networks)

  • 김준형;박정현;이성근;고진광
    • 스마트미디어저널
    • /
    • 제5권1호
    • /
    • pp.55-60
    • /
    • 2016
  • 센서노드의 이동성 허용은 센서 네트워크의 효율적인 설계 및 시스템 성능 향상에 기여할 수 있다. 하지만, MAC 프로토콜 및 라우팅 프로토콜에 많은 기능적 변화가 필요하다. 특히, 노드 이동성을 고려한 에너지 효율적인 전송 메커니즘에 대한 연구가 매우 중요하다. 본 논문은 모바일 센서 네트워크 환경에서 센서노드가 싱크노드를 향하여 데이터를 전달할 때 인접 노드들의 거리 정보에 따라 다음 노드를 결정하고, 이를 토대로 거리에 따른 전송 출력을 적절히 제어하는 메커니즘을 제안한다. 시뮬레이션 방법을 통한 성능분석 결과, 본 논문에서 제안한 메커니즘이 평균 에너지 소모량, 네트워크 수명 등의 성능 지표에 대해 기존 최단 홉 라우팅 방식보다 에너지 효율을 향상시킨 것으로 분석되었다.

센서 네트워크의 균등분포 클러스터 기반 멀티홉 라우팅 (Balanced Cluster-based Multi-hop Routing in Sensor Networks)

  • 우매리
    • 한국멀티미디어학회논문지
    • /
    • 제19권5호
    • /
    • pp.910-917
    • /
    • 2016
  • Sensors have limited resources in sensor networks, so efficient use of energy is important. Representative clustering methods, LEACH, LEACHC, TEEN generally use direct transmission methods from cluster headers to the sink node to pass collected data. However, the communication distance of the sensor nodes at low cost and at low power is not long, it requires a data transfer through the multi-hop to transmit data to the sink node. In the existing cluster-based sensor network studies, cluster process and route selection process are performed separately in order to configure the routing path to the sink node. In this paper, in order to use the energy of the sensor nodes that have limited resources efficiently, a cluster-based multi-hop routing protocol which merges the clustering process and routing process is proposed. And the proposed method complements the problem of uneven cluster creation that may occur in probabilistic cluster methods and increases the energy efficiency of whole sensor nodes.

A Comparative Analysis on Performance of Wireless Sensor Networks Routing Protocols

  • KRISHNA, KONDA. HARI;NAGPAL, TAPSI;BABU, Y. SURESH
    • International Journal of Computer Science & Network Security
    • /
    • 제22권7호
    • /
    • pp.240-244
    • /
    • 2022
  • The common goals of designing a routing algorithm are not only to reduce control packet overhead, maximize throughput and minimize the end-to-end delay, but also take into consideration the energy consumption. Scalability is an important factor in designing an efficient routing protocol for wireless sensor networks (WSN's). Three metrics (power consumption, time of transmission and packet loss rate) are used in order to compare three routing protocols which are AODV, DSDV and LEACH.

Ad-Hoc 네트워크를 이용한 모바일 그리드의 구조 설계 (The Design of Mobile Grid Architecture using Ad-Hoc Network)

  • 김태경;서희석;김희완
    • 한국컴퓨터산업학회논문지
    • /
    • 제6권2호
    • /
    • pp.345-354
    • /
    • 2005
  • 그리드 사용자에게 시간과 장소에 상관없이 그리드 서비스를 이용할 수 있게 해주는 기술이 모바일 그리드이다. 이동환경에서 그리드 서비스를 제공하기 위해서는 단말기 배터리의 성능 및 이동성의 고려 등 여러 가지 제약사항이 따르며, 유선망에서의 그리드 기술을 이동 환경에 적용하기에는 많은 어려움이 있다. 따라서 본 논문에서는 모바일 그리드 서비스를 제공하기 위한 모바일 그리드 구조를 Ad-hoc 네트워크를 이용하여 설계를 하였으며, NS-2(Network Simulator)를 이용한 시뮬레이션을 통한 세 가지 방법의 라우팅 프로토콜의 지연시간에 대한 측정 및 이동 단말기 배터리의 성능을 고려한 비교를 통해, hybrid 방식의 라우팅 프로토콜이 효율적임을 제시하였다. 향후 모바일 그리드 서비스를 제공하기 위한 자원 할당 및 신뢰성 확보 방안에 대한 연구를 수행할 예정이다.

  • PDF

에너지하베스팅 무선센서네트워크를 위한 전력효율적인 매체접근제어 프로토콜 (Power-efficient MAC protocol for energy harvesting wireless sensor networks)

  • 심규욱;박형근
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2018년도 추계학술대회
    • /
    • pp.580-581
    • /
    • 2018
  • 에너지 하베스팅 무선센서네트워크에서 end-to-end delay를 줄이기 위해 멀티홉 라우팅기법을 적용한 매체접근제어 프로토콜 들이 연구되었다. 실제 환경에서는 소비되는 에너지 보다 충분히 많은 에너지 수집이 어려운 상황이 많이 발생하게 된다. 따라서 멀티홉 전송에서 전력이 고갈되지 않고 노드들이 안정적으로 데이터를 릴레이 할 수 있도록 하는 MAC프로토콜의 설계가 요구된다. 본 논문에서는 네트워크 수명을 증가시키기 우해 잔여전력과 에너지 수집율에 따라 릴레이노드를 선택할 수 있는 전력효율적인 MAC프로토콜을 제안하고 시뮬레이션을 통해 그 성능을 비교분석하였다.

  • PDF

무선 센서 네트워크에서 수집 데이터의 효과적인 전송을 위한 비겹침 다중경로 라우팅 프로토콜 (A Disjoint Multi-path Routing Protocol for Efficient Transmission of Collecting Data in Wireless Sensor Network)

  • 한대만;임재현
    • 정보처리학회논문지C
    • /
    • 제17C권5호
    • /
    • pp.433-440
    • /
    • 2010
  • 무선 센서 네트워크에서 에너지 효율성, 전송 지연 그리고 확장성은 중요한 요구사항이며, 특히 다수의 노드로 구성된 무선 센서 네트워크의 경우 네트워크 라이프타임 연장을 위해 제한된 배터리 전력 내에서 각 노드의 에너지 소비를 최소화 시켜야한다. 또한 전송률을 향상시키기 위해서는 각 센서 노드의 에너지 소비를 최소화하기 위한 효율적인 알고리즘과 에너지 관리 기술이 요구된다. 본 논문은 무선 센서 네트워크 환경에서 센서 데이터 전송을 위해 경로의 겹침이 없는 다중경로 프로토콜을 제안한다. 제안한 방법은 다중경로를 검색하고 라우팅 테이블에 다중경로를 추가시켜 센서 데이터 전송의 감소를 통해 네트워크 오버헤드를 최소화 시킨다. 제안한 라우팅 프로토콜은 각 노드의 에너지 소비를 최소화하고, 싱크 노드가 수신 강도 범위 내, 외부에 위치하더라도 센서 네트워크의 생명주기를 연장할 수 있다. 실제 데이터를 이용하여 현실 모델에 맞게 센서 네트워크를 구축하고 제안 기법의 타당성을 검증하며, 전체 에너지의 소비량을 평가한다.